Coverage Report

Coverage Report - org.apache.commons.configuration.AbstractFileConfiguration

Classes in this File
Line Coverage
Branch Coverage
Complexity
AbstractFileConfiguration
90%
234/261
97%
33/34
2,438
 /*
  * Licensed to the Apache Software Foundation (ASF) under one or more
  * contributor license agreements.  See the NOTICE file distributed with
  * this work for additional information regarding copyright ownership.
  * The ASF licenses this file to You under the Apache License, Version 2.0
  * (the "License"); you may not use this file except in compliance with
  * the License.  You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 
 package org.apache.commons.configuration;
 
 import java.io.File;
 import java.io.FileOutputStream;
 import java.io.IOException;
 import java.io.InputStream;
 import java.io.InputStreamReader;
 import java.io.OutputStream;
 import java.io.OutputStreamWriter;
 import java.io.Reader;
 import java.io.UnsupportedEncodingException;
 import java.io.Writer;
 import java.net.HttpURLConnection;
 import java.net.MalformedURLException;
 import java.net.URL;
 import java.net.URLConnection;
 import java.util.Iterator;
 
 import org.apache.commons.configuration.reloading.InvariantReloadingStrategy;
 import org.apache.commons.configuration.reloading.ReloadingStrategy;
 import org.apache.commons.lang.StringUtils;
 import org.apache.commons.logging.LogFactory;
 
 /**
  * <p>Partial implementation of the <code>FileConfiguration</code> interface.
  * Developpers of file based configuration may want to extend this class,
  * the two methods left to implement are <code>{@link FileConfiguration#load(Reader)}</code>
  * and <code>{@link FileConfiguration#save(Writer)}</code>.</p>
  * <p>This base class already implements a couple of ways to specify the location
  * of the file this configuration is based on. The following possibilities
  * exist:
  * <ul><li>URLs: With the method <code>setURL()</code> a full URL to the
  * configuration source can be specified. This is the most flexible way. Note
  * that the <code>save()</code> methods support only <em>file:</em> URLs.</li>
  * <li>Files: The <code>setFile()</code> method allows to specify the
  * configuration source as a file. This can be either a relative or an
  * absolute file. In the former case the file is resolved based on the current
  * directory.</li>
  * <li>As file paths in string form: With the <code>setPath()</code> method a
  * full path to a configuration file can be provided as a string.</li>
  * <li>Separated as base path and file name: This is the native form in which
  * the location is stored. The base path is a string defining either a local
  * directory or a URL. It can be set using the <code>setBasePath()</code>
  * method. The file name, non surprisingly, defines the name of the configuration
  * file.</li></ul></p>
  * <p>Note that the <code>load()</code> methods do not wipe out the configuration's
  * content before the new configuration file is loaded. Thus it is very easy to
  * construct a union configuration by simply loading multiple configuration
  * files, e.g.</p>
  * <p><pre>
  * config.load(configFile1);
  * config.load(configFile2);
  * </pre></p>
  * <p>After executing this code fragment, the resulting configuration will
  * contain both the properties of configFile1 and configFile2. On the other
  * hand, if the current configuration file is to be reloaded, <code>clear()</code>
  * should be called first. Otherwise the properties are doubled. This behavior
  * is analogous to the behavior of the <code>load(InputStream)</code> method
  * in <code>java.util.Properties</code>.</p>
  *
  * @author Emmanuel Bourg
  * @version $Revision: 545904 $, $Date: 2007-06-10 18:10:17 +0200 (So, 10 Jun 2007) $
  * @since 1.0-rc2
  */
 public abstract class AbstractFileConfiguration extends BaseConfiguration implements FileConfiguration
 {
     /** Constant for the configuration reload event.*/
     public static final int EVENT_RELOAD = 20;
 
     /** Stores the file name.*/
     protected String fileName;
 
     /** Stores the base path.*/
     protected String basePath;
 
     /** The auto save flag.*/
     protected boolean autoSave;
 
     /** Holds a reference to the reloading strategy.*/
     protected ReloadingStrategy strategy;
 
     /** A lock object for protecting reload operations.*/
     private Object reloadLock = new Object();
 
     /** Stores the encoding of the configuration file.*/
     private String encoding;
 
     /** Stores the URL from which the configuration file was loaded.*/
     private URL sourceURL;
 
     /** A counter that prohibits reloading.*/
     private int noReload;
 
     /**
      * Default constructor
      *
      * @since 1.1
      */
     public AbstractFileConfiguration()
     {
         initReloadingStrategy();
         setLogger(LogFactory.getLog(getClass()));
         addErrorLogListener();
     }
 
     /**
      * Creates and loads the configuration from the specified file. The passed
      * in string must be a valid file name, either absolute or relativ.
      *
      * @param fileName The name of the file to load.
      *
      * @throws ConfigurationException Error while loading the file
      * @since 1.1
      */
     public AbstractFileConfiguration(String fileName) throws ConfigurationException
     {
         this();
 
         // store the file name
         setFileName(fileName);
 
         // load the file
         load();
     }
 
     /**
      * Creates and loads the configuration from the specified file.
      *
      * @param file The file to load.
      * @throws ConfigurationException Error while loading the file
      * @since 1.1
      */
     public AbstractFileConfiguration(File file) throws ConfigurationException
     {
         this();
 
         // set the file and update the url, the base path and the file name
         setFile(file);
 
         // load the file
         if (file.exists())
         {
             load();
         }
     }
 
     /**
      * Creates and loads the configuration from the specified URL.
      *
      * @param url The location of the file to load.
      * @throws ConfigurationException Error while loading the file
      * @since 1.1
      */
     public AbstractFileConfiguration(URL url) throws ConfigurationException
     {
         this();
 
         // set the URL and update the base path and the file name
         setURL(url);
 
         // load the file
         load();
     }
 
     /**
      * Load the configuration from the underlying location.
      *
      * @throws ConfigurationException if loading of the configuration fails
      */
     public void load() throws ConfigurationException
     {
         if (sourceURL != null)
         {
             load(sourceURL);
         }
         else
         {
             load(getFileName());
         }
     }
 
     /**
      * Locate the specified file and load the configuration. This does not
      * change the source of the configuration (i.e. the internally maintained file name).
      * Use one of the setter methods for this purpose.
      *
      * @param fileName the name of the file to be loaded
      * @throws ConfigurationException if an error occurs
      */
     public void load(String fileName) throws ConfigurationException
     {
         try
         {
             URL url = ConfigurationUtils.locate(basePath, fileName);
 
             if (url == null)
             {
                 throw new ConfigurationException("Cannot locate configuration source " + fileName);
             }
             load(url);
         }
         catch (ConfigurationException e)
         {
             throw e;
         }
         catch (Exception e)
         {
             throw new ConfigurationException(e.getMessage(), e);
         }
     }
 
     /**
      * Load the configuration from the specified file. This does not change
      * the source of the configuration (i.e. the internally maintained file
      * name). Use one of the setter methods for this purpose.
      *
      * @param file the file to load
      * @throws ConfigurationException if an error occurs
      */
     public void load(File file) throws ConfigurationException
     {
         try
         {
             load(file.toURL());
         }
         catch (ConfigurationException e)
         {
             throw e;
         }
         catch (Exception e)
         {
             throw new ConfigurationException(e.getMessage(), e);
         }
     }
 
     /**
      * Load the configuration from the specified URL. This does not change the
      * source of the configuration (i.e. the internally maintained file name).
      * Use on of the setter methods for this purpose.
      *
      * @param url the URL of the file to be loaded
      * @throws ConfigurationException if an error occurs
      */
     public void load(URL url) throws ConfigurationException
     {
         if (sourceURL == null)
         {
             if (StringUtils.isEmpty(getBasePath()))
             {
                 // ensure that we have a valid base path
                 setBasePath(url.toString());
             }
             sourceURL = url;
         }
 
         // throw an exception if the target URL is a directory
         File file = ConfigurationUtils.fileFromURL(url);
         if (file != null && file.isDirectory())
         {
             throw new ConfigurationException("Cannot load a configuration from a directory");
         }
 
         InputStream in = null;
 
         try
         {
             in = url.openStream();
             load(in);
         }
         catch (ConfigurationException e)
         {
             throw e;
         }
         catch (Exception e)
         {
             throw new ConfigurationException(e.getMessage(), e);
         }
         finally
         {
             // close the input stream
             try
             {
                 if (in != null)
                 {
                     in.close();
                 }
             }
             catch (IOException e)
             {
                 getLogger().warn("Could not close input stream", e);
             }
         }
     }
 
     /**
      * Load the configuration from the specified stream, using the encoding
      * returned by {@link #getEncoding()}.
      *
      * @param in the input stream
      *
      * @throws ConfigurationException if an error occurs during the load operation
      */
     public void load(InputStream in) throws ConfigurationException
     {
         load(in, getEncoding());
     }
 
     /**
      * Load the configuration from the specified stream, using the specified
      * encoding. If the encoding is null the default encoding is used.
      *
      * @param in the input stream
      * @param encoding the encoding used. <code>null</code> to use the default encoding
      *
      * @throws ConfigurationException if an error occurs during the load operation
      */
     public void load(InputStream in, String encoding) throws ConfigurationException
     {
         Reader reader = null;
 
         if (encoding != null)
         {
             try
             {
                 reader = new InputStreamReader(in, encoding);
             }
             catch (UnsupportedEncodingException e)
             {
                 throw new ConfigurationException(
                         "The requested encoding is not supported, try the default encoding.", e);
             }
         }
 
         if (reader == null)
         {
             reader = new InputStreamReader(in);
         }
 
         load(reader);
     }
 
     /**
      * Save the configuration. Before this method can be called a valid file
      * name must have been set.
      *
      * @throws ConfigurationException if an error occurs or no file name has
      * been set yet
      */
     public void save() throws ConfigurationException
     {
         if (getFileName() == null)
         {
             throw new ConfigurationException("No file name has been set!");
         }
 
         if (sourceURL != null)
         {
             save(sourceURL);
         }
         else
         {
             save(fileName);
         }
         strategy.init();
     }
 
     /**
      * Save the configuration to the specified file. This doesn't change the
      * source of the configuration, use setFileName() if you need it.
      *
      * @param fileName the file name
      *
      * @throws ConfigurationException if an error occurs during the save operation
      */
     public void save(String fileName) throws ConfigurationException
     {
         try
         {
             File file = ConfigurationUtils.getFile(basePath, fileName);
             if (file == null)
             {
                 throw new ConfigurationException("Invalid file name for save: " + fileName);
             }
             save(file);
         }
         catch (ConfigurationException e)
         {
             throw e;
         }
         catch (Exception e)
         {
             throw new ConfigurationException(e.getMessage(), e);
         }
     }
 
     /**
      * Save the configuration to the specified URL.
      * This doesn't change the source of the configuration, use setURL()
      * if you need it.
      *
      * @param url the URL
      *
      * @throws ConfigurationException if an error occurs during the save operation
      */
     public void save(URL url) throws ConfigurationException
     {
         // file URLs have to be converted to Files since FileURLConnection is
         // read only (http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4191800)
         File file = ConfigurationUtils.fileFromURL(url);
         if (file != null)
         {
             save(file);
         }
         else
         {
             // for non file URLs save through an URLConnection
             OutputStream out = null;
             try
             {
                 URLConnection connection = url.openConnection();
                 connection.setDoOutput(true);
 
                 // use the PUT method for http URLs
                 if (connection instanceof HttpURLConnection)
                 {
                     HttpURLConnection conn = (HttpURLConnection) connection;
                     conn.setRequestMethod("PUT");
                 }
 
                 out = connection.getOutputStream();
                 save(out);
 
                 // check the response code for http URLs and throw an exception if an error occured
                 if (connection instanceof HttpURLConnection)
                 {
                     HttpURLConnection conn = (HttpURLConnection) connection;
                     if (conn.getResponseCode() >= HttpURLConnection.HTTP_BAD_REQUEST)
                     {
                         throw new IOException("HTTP Error " + conn.getResponseCode() + " " + conn.getResponseMessage());
                     }
                 }
             }
             catch (IOException e)
             {
                 throw new ConfigurationException("Could not save to URL " + url, e);
             }
             finally
             {
                 closeSilent(out);
             }
         }
     }
 
     /**
      * Save the configuration to the specified file. The file is created
      * automatically if it doesn't exist. This doesn't change the source
      * of the configuration, use {@link #setFile} if you need it.
      *
      * @param file the target file
      *
      * @throws ConfigurationException if an error occurs during the save operation
      */
     public void save(File file) throws ConfigurationException
     {
         OutputStream out = null;
 
         try
         {
             // create the file if necessary
             createPath(file);
             out = new FileOutputStream(file);
             save(out);
         }
         catch (IOException e)
         {
             throw new ConfigurationException(e.getMessage(), e);
         }
         finally
         {
             closeSilent(out);
         }
     }
 
     /**
      * Save the configuration to the specified stream, using the encoding
      * returned by {@link #getEncoding()}.
      *
      * @param out the output stream
      *
      * @throws ConfigurationException if an error occurs during the save operation
      */
     public void save(OutputStream out) throws ConfigurationException
     {
         save(out, getEncoding());
     }
 
     /**
      * Save the configuration to the specified stream, using the specified
      * encoding. If the encoding is null the default encoding is used.
      *
      * @param out the output stream
      * @param encoding the encoding to use
      * @throws ConfigurationException if an error occurs during the save operation
      */
     public void save(OutputStream out, String encoding) throws ConfigurationException
     {
         Writer writer = null;
 
         if (encoding != null)
         {
             try
             {
                 writer = new OutputStreamWriter(out, encoding);
             }
             catch (UnsupportedEncodingException e)
             {
                 throw new ConfigurationException(
                         "The requested encoding is not supported, try the default encoding.", e);
             }
         }
 
         if (writer == null)
         {
             writer = new OutputStreamWriter(out);
         }
 
         save(writer);
     }
 
     /**
      * Return the name of the file.
      *
      * @return the file name
      */
     public String getFileName()
     {
         return fileName;
     }
 
     /**
      * Set the name of the file. The passed in file name can contain a
      * relative path.
      * It must be used when referring files with relative paths from classpath.
      * Use <code>{@link AbstractFileConfiguration#setPath(String)
      * setPath()}</code> to set a full qualified file name.
      *
      * @param fileName the name of the file
      */
     public void setFileName(String fileName)
     {
         sourceURL = null;
         this.fileName = fileName;
     }
 
     /**
      * Return the base path.
      *
      * @return the base path
      * @see FileConfiguration#getBasePath()
      */
     public String getBasePath()
     {
         return basePath;
     }
 
     /**
      * Sets the base path. The base path is typically either a path to a
      * directory or a URL. Together with the value passed to the
      * <code>setFileName()</code> method it defines the location of the
      * configuration file to be loaded. The strategies for locating the file are
      * quite tolerant. For instance if the file name is already an absolute path
      * or a fully defined URL, the base path will be ignored. The base path can
      * also be a URL, in which case the file name is interpreted in this URL's
      * context. Because the base path is used by some of the derived classes for
      * resolving relative file names it should contain a meaningful value. If
      * other methods are used for determining the location of the configuration
      * file (e.g. <code>setFile()</code> or <code>setURL()</code>), the
      * base path is automatically set.
      *
      * @param basePath the base path.
      */
     public void setBasePath(String basePath)
     {
         sourceURL = null;
         this.basePath = basePath;
     }
 
     /**
      * Return the file where the configuration is stored. If the base path is a
      * URL with a protocol different than &quot;file&quot;, or the configuration
      * file is within a compressed archive, the return value
      * will not point to a valid file object.
      *
      * @return the file where the configuration is stored; this can be <b>null</b>
      */
     public File getFile()
     {
         if (getFileName() == null && sourceURL == null)
         {
             return null;
         }
         else if (sourceURL != null)
         {
             return ConfigurationUtils.fileFromURL(sourceURL);
         }
         else
         {
             return ConfigurationUtils.getFile(getBasePath(), getFileName());
         }
     }
 
     /**
      * Set the file where the configuration is stored. The passed in file is
      * made absolute if it is not yet. Then the file's path component becomes
      * the base path and its name component becomes the file name.
      *
      * @param file the file where the configuration is stored
      */
     public void setFile(File file)
     {
         sourceURL = null;
         setFileName(file.getName());
         setBasePath((file.getParentFile() != null) ? file.getParentFile()
                 .getAbsolutePath() : null);
     }
 
     /**
      * Returns the full path to the file this configuration is based on. The
      * return value is a valid File path only if this configuration is based on
      * a file on the local disk.
      * If the configuration was loaded from a packed archive the returned value
      * is the string form of the URL from which the configuration was loaded.
      *
      * @return the full path to the configuration file
      */
     public String getPath()
     {
         String path = null;
         File file = getFile();
         // if resource was loaded from jar file may be null
         if (file != null)
         {
             path = file.getAbsolutePath();
         }
 
         // try to see if file was loaded from a jar
         if (path == null)
         {
             if (sourceURL != null)
             {
                 path = sourceURL.getPath();
             }
             else
             {
                 try
                 {
                     path = ConfigurationUtils.getURL(getBasePath(), getFileName()).getPath();
                 }
                 catch (MalformedURLException e)
                 {
                     // simply ignore it and return null
                     ;
                 }
             }
         }
 
         return path;
     }
 
     /**
      * Sets the location of this configuration as a full or relative path name.
      * The passed in path should represent a valid file name on the file system.
      * It must not be used to specify relative paths for files that exist
      * in classpath, either plain file system or compressed archive,
      * because this method expands any relative path to an absolute one which
      * may end in an invalid absolute path for classpath references.
      *
      * @param path the full path name of the configuration file
      */
     public void setPath(String path)
     {
         setFile(new File(path));
     }
 
     /**
      * Return the URL where the configuration is stored.
      *
      * @return the configuration's location as URL
      */
     public URL getURL()
     {
         return (sourceURL != null) ? sourceURL
                 : ConfigurationUtils.locate(getBasePath(), getFileName());
     }
 
     /**
      * Set the location of this configuration as a URL. For loading this can be
      * an arbitrary URL with a supported protocol. If the configuration is to
      * be saved, too, a URL with the &quot;file&quot; protocol should be
      * provided.
      *
      * @param url the location of this configuration as URL
      */
     public void setURL(URL url)
     {
         setBasePath(ConfigurationUtils.getBasePath(url));
         setFileName(ConfigurationUtils.getFileName(url));
         sourceURL = url;
     }
 
     public void setAutoSave(boolean autoSave)
     {
         this.autoSave = autoSave;
     }
 
     public boolean isAutoSave()
     {
         return autoSave;
     }
 
     /**
      * Save the configuration if the automatic persistence is enabled
      * and if a file is specified.
      */
     protected void possiblySave()
     {
         if (autoSave && fileName != null)
         {
             try
             {
                 save();
             }
             catch (ConfigurationException e)
             {
                 throw new ConfigurationRuntimeException("Failed to auto-save", e);
             }
         }
     }
 
     /**
      * Adds a new property to this configuration. This implementation checks if
      * the auto save mode is enabled and saves the configuration if necessary.
      *
      * @param key the key of the new property
      * @param value the value
      */
     public void addProperty(String key, Object value)
     {
         super.addProperty(key, value);
         possiblySave();
     }
 
     /**
      * Sets a new value for the specified property. This implementation checks
      * if the auto save mode is enabled and saves the configuration if
      * necessary.
      *
      * @param key the key of the affected property
      * @param value the value
      */
     public void setProperty(String key, Object value)
     {
         super.setProperty(key, value);
         possiblySave();
     }
 
     public void clearProperty(String key)
     {
         super.clearProperty(key);
         possiblySave();
     }
 
     public ReloadingStrategy getReloadingStrategy()
     {
         return strategy;
     }
 
     public void setReloadingStrategy(ReloadingStrategy strategy)
     {
         this.strategy = strategy;
         strategy.setConfiguration(this);
         strategy.init();
     }
 
     /**
      * Performs a reload operation if necessary. This method is called on each
      * access of this configuration. It asks the associated reloading strategy
      * whether a reload should be performed. If this is the case, the
      * configuration is cleared and loaded again from its source. If this
      * operation causes an exception, the registered error listeners will be
      * notified. The error event passed to the listeners is of type
      * <code>EVENT_RELOAD</code> and contains the exception that caused the
      * event.
      */
     public void reload()
     {
         synchronized (reloadLock)
         {
             if (noReload == 0)
             {
                 try
                 {
                     enterNoReload(); // avoid reentrant calls
 
                     if (strategy.reloadingRequired())
                     {
                         if (getLogger().isInfoEnabled())
                         {
                             getLogger().info("Reloading configuration. URL is " + getURL());
                         }
                         fireEvent(EVENT_RELOAD, null, getURL(), true);
                         setDetailEvents(false);
                         boolean autoSaveBak = this.isAutoSave(); // save the current state
                         this.setAutoSave(false); // deactivate autoSave to prevent information loss
                         try
                         {
                             clear();
                             load();
                         }
                         finally
                         {
                             this.setAutoSave(autoSaveBak); // set autoSave to previous value
                             setDetailEvents(true);
                         }
                         fireEvent(EVENT_RELOAD, null, getURL(), false);
 
                         // notify the strategy
                         strategy.reloadingPerformed();
                     }
                 }
                 catch (Exception e)
                 {
                     fireError(EVENT_RELOAD, null, null, e);
                     // todo rollback the changes if the file can't be reloaded
                 }
                 finally
                 {
                     exitNoReload();
                 }
             }
         }
     }
 
     /**
      * Enters the &quot;No reloading mode&quot;. As long as this mode is active
      * no reloading will be performed. This is necessary for some
      * implementations of <code>save()</code> in derived classes, which may
      * cause a reload while accessing the properties to save. This may cause the
      * whole configuration to be erased. To avoid this, this method can be
      * called first. After a call to this method there always must be a
      * corresponding call of <code>{@link #exitNoReload()}</code> later! (If
      * necessary, <code>finally</code> blocks must be used to ensure this.
      */
     protected void enterNoReload()
     {
         synchronized (reloadLock)
         {
             noReload++;
         }
     }
 
     /**
      * Leaves the &quot;No reloading mode&quot;.
      *
      * @see #enterNoReload()
      */
     protected void exitNoReload()
     {
         synchronized (reloadLock)
         {
             if (noReload > 0) // paranoia check
             {
                 noReload--;
             }
         }
     }
 
     /**
      * Sends an event to all registered listeners. This implementation ensures
      * that no reloads are performed while the listeners are invoked. So
      * infinite loops can be avoided that can be caused by event listeners
      * accessing the configuration's properties when they are invoked.
      *
      * @param type the event type
      * @param propName the name of the property
      * @param propValue the value of the property
      * @param before the before update flag
      */
     protected void fireEvent(int type, String propName, Object propValue, boolean before)
     {
         enterNoReload();
         try
         {
             super.fireEvent(type, propName, propValue, before);
         }
         finally
         {
             exitNoReload();
         }
     }
 
     public Object getProperty(String key)
     {
         reload();
         return super.getProperty(key);
     }
 
     public boolean isEmpty()
     {
         reload();
         return super.isEmpty();
     }
 
     public boolean containsKey(String key)
     {
         reload();
         return super.containsKey(key);
     }
 
     public Iterator getKeys()
     {
         reload();
         return super.getKeys();
     }
 
     /**
      * Create the path to the specified file.
      *
      * @param file the target file
      */
     private void createPath(File file)
     {
         if (file != null)
         {
             // create the path to the file if the file doesn't exist
             if (!file.exists())
             {
                 File parent = file.getParentFile();
                 if (parent != null && !parent.exists())
                 {
                     parent.mkdirs();
                 }
             }
         }
     }
 
     public String getEncoding()
     {
         return encoding;
     }
 
     public void setEncoding(String encoding)
     {
         this.encoding = encoding;
     }
 
     /**
      * Creates a copy of this configuration. The new configuration object will
      * contain the same properties as the original, but it will lose any
      * connection to a source file (if one exists); this includes setting the
      * source URL, base path, and file name to <b>null</b>. This is done to
      * avoid race conditions if both the original and the copy are modified and
      * then saved.
      *
      * @return the copy
      * @since 1.3
      */
     public Object clone()
     {
         AbstractFileConfiguration copy = (AbstractFileConfiguration) super.clone();
         copy.setBasePath(null);
         copy.setFileName(null);
         copy.initReloadingStrategy();
         return copy;
     }
 
     /**
      * Helper method for initializing the reloading strategy.
      */
     private void initReloadingStrategy()
     {
         setReloadingStrategy(new InvariantReloadingStrategy());
     }
 
     /**
      * A helper method for closing an output stream. Occurring exceptions will
      * be ignored.
      *
      * @param out the output stream to be closed (may be <b>null</b>)
      * @since 1.5
      */
     private void closeSilent(OutputStream out)
     {
         try
         {
             if (out != null)
             {
                 out.close();
             }
         }
         catch (IOException e)
         {
             getLogger().warn("Could not close output stream", e);
         }
     }
 }