Search:     Advanced search
Browse by category:
Glossary | Ask question



What are the steps for password recovery of APV/AG/ASF Appliance?
Add comment
Views: 463
Votes: 0
Comments: 0

Password recovery is required when user forgets the assigned password to the device for logging in or password for enable mode after entering the device.

By default, all Array devices have username as “array” and password as “admin”. The enable mode has no password by default. Users can create other username and password as per their requirements.

Prerequisites required for Password Recovery.

  1. Console access to the device when resetting password on hardware models.

2. If vAPV/vxAG/vASF is on AVX then AVX SSH/console access is required.

Password Recovery steps.

Array user password recovery:

To reset user “array” password follow below steps:

  1. Take console access of the device.

2. In the username prompt enter recovery, a challenge string will be generated.

3. Email the challenge string to Array Networks Customer Support at: tacsupport@arraynetworks.com. A response code will be shared via email by the Customer Support representative.

4. Copy and paste the response code in the CLI, and press enter, array user password will be set to default.

Enable password recovery:

To recover enable mode password, follow below steps:

  1. after logging in with the username and password enter enable recovery, a challenge string will be generated.

                          

2.  Email the challenge string to Array Networks Customer Support at: tacsupport@arraynetworks.com. A response code will be returned via email by the Customer Support representative.

3. Copy and paste the response code in the CLI, and press “Enter”. The password of the Enable level will be reset to empty.



Other questions in this category
How to download corefile(s)?
What is the max number of Syslog servers Array support on the SPX
What is the max number of SNMP servers Array support on the SPX
What is the syntax of ssldump to decrypt an SSL trace?
What is the syntax of ssldump to collect a clear text SSL trace?
What are the commands that will not sync either by SSF or Synconfig?
How to collect the debug snapshot all?
How to collect debug snapshot and traces?
How does the SPX send SNMP trap?
How to Decrypt Packet capture with Session keys?