Overview.bs

<pre class='metadata'>
Title: CSS Images Module Level 3
Status: ED
Shortname: css-images
Level: 3
Group: csswg
ED: https://drafts.csswg.org/css-images-3/
TR: https://www.w3.org/TR/css3-images/
Work Status: Testing
Editor: Tab Atkins Jr., Google, http://xanthir.com/contact/, w3cid 42199
Editor: Elika J. Etemad / fantasai, Invited Expert, http://fantasai.inkedblade.net/contact, w3cid 35400
Editor: Lea Verou, Invited Expert, http://lea.verou.me/about, w3cid 52258
Abstract: This module contains the features of CSS level 3 relating to the <<image>> type and some replaced elements.
	It includes and extends the functionality of CSS level 2 [[CSS2]].
	The main extensions compared to CSS2.1 are the generalization of the <<url>> type to the <<image>> type,
	several additions to the <<image>> type, a generic sizing algorithm for images and other replaced content in CSS,
	definitions for interpolating several <<image>> types,
	and several properties controlling the interaction of replaced elements and CSS's layout models.
At Risk: 'image-orientation'
Issue Tracking: Tracker http://www.w3.org/Style/CSS/Tracker/products/27
Previous Version: https://www.w3.org/TR/2012/CR-css3-images-20120417/
Previous Version: https://www.w3.org/TR/2012/WD-css3-images-20120112/
Ignored Terms: <offset>, background positioning area, border image area, <meetorslice>, <ending-shape>, Map, center, content
Ignored Vars: start image, end image
Link Defaults: css2 (property) display
Include Can I Use Panels: yes
</pre>

Introduction {#intro}
=====================

	In CSS Levels 1 and 2,
	image values, such as those used in the 'background-image' property,
	could only be given by a single URL value.
	This module introduces additional ways of representing 2D images,
	for example as <a section href="#gradients">a gradient</a>.

	This module also defines several properties for <a section href="#image-processing">manipulating raster images</a>
	and for <a section href="#the-object-fit">sizing</a>
	or <a section href="#the-object-position">positioning</a>
	replaced elements such as images within the box determined by the CSS layout algorithms.
	It also defines in a generic way CSS's <a section href="#sizing">sizing algorithm</a> for images and other similar replaced elements.

	<em>This subsection (above) is not normative.</em>

Module Interactions {#placement}
--------------------------------

	This module defines and extends the <<image>> value type
	defined in [[!CSS-VALUES-3]].
	It also replaces the <<url>> type with <<image>>
	in the 'background-image', 'cursor', and 'list-style-image' definitions in CSS1 and CSS2
	and adds <<image>> as an alternative to <<url>>
	in the 'content' property's value.
	It is presumed that CSS specifications beyond CSS2.1
	will use the <<image>> notation in place of <<url>>
	where 2D images are expected.
	(See e.g. [[CSS3BG]].)

	None of the properties defined in this module, only 'image-rendering'
	applies to <code>::first-line</code> and <code>::first-letter</code>.

Values {#values}
----------------

	This specification follows
	the <a href="https://www.w3.org/TR/CSS2/about.html#property-defs">CSS property definition conventions</a> from [[!CSS2]].
	Value types not defined in this specification are defined in CSS Level 2 Revision 1 [[!CSS2]].
	Other CSS modules may expand the definitions of these value types:
	for example [[CSS-VALUES-3]], when combined with this module,
	adds the ''initial'' keyword as a possible property value.

	In addition to the property-specific values listed in their definitions,
	all properties defined in this specification also accept the
	<a href="https://www.w3.org/TR/CSS2/cascade.html#value-def-inherit">inherit</a>
	keyword as their property value.
	For readability it has not been repeated explicitly.

<!--
   ██ ████ ██     ██    ███     ██████   ████████ ██
  ██   ██  ███   ███   ██ ██   ██    ██  ██        ██
 ██    ██  ████ ████  ██   ██  ██        ██         ██
██     ██  ██ ███ ██ ██     ██ ██   ████ ██████      ██
 ██    ██  ██     ██ █████████ ██    ██  ██         ██
  ██   ██  ██     ██ ██     ██ ██    ██  ██        ██
   ██ ████ ██     ██ ██     ██  ██████   ████████ ██
-->

Image Values: the <<image>> type {#image-values}
================================================

	The <<image>> value type denotes a 2D image.
	It can be a
	<a href="#url-notation">url reference</a>
	or a <a href="#gradients">color gradient</a>.
	Its syntax is:

	<pre class="prod"><dfn>&lt;image></dfn> = <<url>> | <<cross-fade()>> | <<gradient>></pre>

	An <<image>> can be used in many CSS properties,
	including the 'background-image', 'list-style-image', 'cursor' properties [[!CSS2]]
	(where it replaces the <<url>> component in the property's value).

	In some cases, an image is invalid,
	such as a <<url>> pointing to a resource that is not a valid image format.
	An <dfn export lt="invalid image|valid image">invalid image</dfn> is rendered as a solid-color ''transparent'' image with no intrinsic dimensions.
	However, <a>invalid images</a> can trigger error-handling clauses
	in some contexts.
	For example, an <a>invalid image</a> in 'list-style-image'
	is treated as ''list-style-type/none'',
	allowing the 'list-style-type' to render in its place. [[CSS2]]

<!--
   ██ ██     ██ ████████  ██       ██
  ██  ██     ██ ██     ██ ██        ██
 ██   ██     ██ ██     ██ ██         ██
██    ██     ██ ████████  ██          ██
 ██   ██     ██ ██   ██   ██         ██
  ██  ██     ██ ██    ██  ██        ██
   ██  ███████  ██     ██ ████████ ██
-->


Image References: the ''url()'' notation {#url-notation}
------------------------------------------------------------------------------------------

	The simplest way to indicate an image is to reference an image file by URL.
	This can be done with the ''url()'' notation, defined in [[CSS-VALUES-3]].

	<div class="example">
		In the example below, a background image is specified with ''url()''syntax:

		<pre>background-image: url(wavy.png);</pre>
	</div>

	If the UA cannot download, parse, or otherwise successfully display
	the contents at the URL as an image
	(i.e. if the image is not fully <a href="https://html.spec.whatwg.org/multipage/webappapis.html#concept-imagebitmap-good">fully decodable</a>)
	it must be treated as an <a>invalid image</a>.





<!--
 ██████  ████████   ███████   ██████   ██████          ████████    ███    ████████  ████████   ███ ███
██    ██ ██     ██ ██     ██ ██    ██ ██    ██         ██         ██ ██   ██     ██ ██        ██     ██
██       ██     ██ ██     ██ ██       ██               ██        ██   ██  ██     ██ ██       ██       ██
██       ████████  ██     ██  ██████   ██████  ███████ ██████   ██     ██ ██     ██ ██████   ██       ██
██       ██   ██   ██     ██       ██       ██         ██       █████████ ██     ██ ██       ██       ██
██    ██ ██    ██  ██     ██ ██    ██ ██    ██         ██       ██     ██ ██     ██ ██        ██     ██
 ██████  ██     ██  ███████   ██████   ██████          ██       ██     ██ ████████  ████████   ███ ███
-->


<!--
 ██████   ████████     ███    ████████  ████ ████████ ██    ██ ████████  ██████
██    ██  ██     ██   ██ ██   ██     ██  ██  ██       ███   ██    ██    ██    ██
██        ██     ██  ██   ██  ██     ██  ██  ██       ████  ██    ██    ██
██   ████ ████████  ██     ██ ██     ██  ██  ██████   ██ ██ ██    ██     ██████
██    ██  ██   ██   █████████ ██     ██  ██  ██       ██  ████    ██          ██
██    ██  ██    ██  ██     ██ ██     ██  ██  ██       ██   ███    ██    ██    ██
 ██████   ██     ██ ██     ██ ████████  ████ ████████ ██    ██    ██     ██████
-->


Gradients {#gradients}
======================

	A gradient is an image that smoothly fades from one color to another.
	These are commonly used for subtle shading in background images, buttons, and many other things.
	The gradient notations described in this section allow an author to specify such an image in a terse syntax,
	so that the UA can generate the image automatically when rendering the page.
	The syntax of a <<gradient>> is:

	<pre class=prod>
		<dfn>&lt;gradient></dfn> =
			<<linear-gradient()>> | <<repeating-linear-gradient()>> |
			<<radial-gradient()>> | <<repeating-radial-gradient()>>
	</pre>

	<div class=example>

		As with the other <<image>> types defined in this specification,
		gradients can be used in any property that accepts images.
		For example:

		* <code>background: linear-gradient(white, gray);</code>
		* <code>list-style-image: radial-gradient(circle, #006, #00a 90%, #0000af 100%, white 100%)</code>
	</div>

	A gradient is drawn into a box with the dimensions of the <a>concrete object size</a>,
	referred to as the <dfn export>gradient box</dfn>.
	However, the gradient itself has no <a>intrinsic dimensions</a>.

	<div class='example'>
		For example, if you use a gradient as a background,
		by default the gradient will draw into a <a>gradient box</a> the size of the element's padding box.
		If 'background-size' is explicitly set to a value such as ''100px 200px'',
		then the <a>gradient box</a> will be 100px wide and 200px tall.
		Similarly, for a gradient used as a 'list-style-image',
		the box would be a 1em square,
		which is the <a>default object size</a> for that property.
	</div>

	Gradients are specified by defining the <dfn>starting point</dfn> and <dfn>ending point</dfn>
	of a <dfn export>gradient line</dfn>
	(which, depending on the type of gradient,
	may geometrically be a line, or a ray, or a spiral),
	and then specifying colors at points along this line.
	The colors are smoothly blended to fill in the rest of the line,
	and then each type of gradient defines how to use the color of the <a>gradient line</a> to produce the actual gradient.

<!--
██       ████ ██    ██ ████████    ███    ████████
██        ██  ███   ██ ██         ██ ██   ██     ██
██        ██  ████  ██ ██        ██   ██  ██     ██
██        ██  ██ ██ ██ ██████   ██     ██ ████████
██        ██  ██  ████ ██       █████████ ██   ██
██        ██  ██   ███ ██       ██     ██ ██    ██
████████ ████ ██    ██ ████████ ██     ██ ██     ██
-->


Linear Gradients: the ''linear-gradient()'' notation {#linear-gradients}
------------------------------------------------------------------------

	A linear gradient is created by specifying a straight <a>gradient line</a>,
	and then several colors placed along that line.
	The image is constructed by creating an infinite canvas
	and painting it with lines perpendicular to the gradient line,
	with the color of the painted line being the color of the gradient line where the two intersect.
	This produces a smooth fade from each color to the next,
	progressing in the specified direction.

<h4 class='no-toc' id='linear-gradient-syntax'>linear-gradient() syntax</h4>

	The linear gradient syntax is:

	<pre class=prod>
		<dfn>linear-gradient()</dfn> = linear-gradient(
			[ <<angle>> | to <<side-or-corner>> ]? ,
			<<color-stop-list>>
		)
		<dfn>&lt;side-or-corner></dfn> = [left | right] || [top | bottom]
	</pre>

	The first argument to the function specifies the <a>gradient line</a>,
	which gives the gradient a direction and determines how color-stops are positioned.
	It may be omitted;
	if so, it defaults to ''to bottom''.

	The <a>gradient line's</a> direction may be specified in two ways:

	: using <<angle>>
	:: For the purpose of this argument,
		''0deg'' points upward,
		and positive angles represent clockwise rotation,
		so ''90deg'' point toward the right.

		The unit identifier may be omitted if the <<angle>> is zero.

	: using keywords
	:: If the argument is ''to top'', ''to right'', ''to bottom'', or ''to left'',
		the angle of the <a>gradient line</a> is ''0deg'', ''90deg'', ''180deg'', or ''270deg'', respectively.

		If the argument instead specifies a corner of the box such as ''to top left'',
		the <a>gradient line</a> must be angled such that it points into the same quadrant as the specified corner,
		and is perpendicular to a line intersecting the two neighboring corners of the <a>gradient box</a>.
		<span class='note'>This causes a color-stop at 50% to intersect the two neighboring corners (see <a href='#corner-gradient-example'>example</a>).</span>

	Starting from the center of the <a>gradient box</a>,
	extend a line at the specified angle in both directions.
	The ending point is the point on the <a>gradient line</a>
	where a line drawn perpendicular to the <a>gradient line</a>
	would intersect the corner of the <a>gradient box</a> in the specified direction.
	The starting point is determined identically, but in the opposite direction.

	Note: It is expected that the next level of this module will provide the ability to define the gradient's direction relative to the current text direction and writing-mode.

	<div class=example>
		<div style="overflow: hidden">
			<img style="float: right; margin-left: 1em;" src='images/gradient-diagram.png' alt="[An image showing a box with a background shading gradually from white in the bottom-left corner to black in the top-right corner.  There is a line, illustrating the gradient line, angled at 45 degrees and passing through the center of the box.  The starting point and ending point of the gradient line are indicated by the intersection of the gradient line with two additional lines that pass through the bottom-left and top-right corners of the box.]">

			This example illustrates visually how to calculate the <a>gradient line</a> from the rules above.
			This shows the starting and ending point of the <a>gradient line</a>,
			along with the actual gradient,
			produced by an element with ''background: linear-gradient(45deg, white, black);''.

			Notice how, though the starting point and ending point are outside of the box,
			they're positioned precisely right so that the gradient is pure white <em>exactly</em> at the corner,
			and pure black <em>exactly</em> at the opposite corner.
			That's intentional, and will always be true for linear gradients.
		</div>
	</div>

	<div class='note'>
		Given:

		* <var>A</var> the angle (in any quadrant) defining the gradient line’s direction such that 0 degrees points upwards and positive angles represent clockwise rotation,
		* <var>W</var> the width of the gradient box,
		* <var>H</var> the height of the gradient box,

		The length of the gradient line (between the <a>starting point</a> and <a>ending point</a>) is:

		<code>abs(<var>W</var> * sin(<var>A</var>)) + abs(<var>H</var> * cos(<var>A</var>))</code>
	</div>

	The gradient's color stops are typically placed between
	the <a>starting point</a> and <a>ending point</a> on the <a>gradient line</a>,
	but this isn't required:
	the <a>gradient line</a> extends infinitely in both directions.
	The starting point and ending point are merely arbitrary location markers,
	the starting point defining where 0%, 0px, etc are located when specifying color-stops,
	and the ending point defines where 100% is located.
	Color-stops are allowed to have positions before 0% or after 100%.

	The color of a linear gradient at any point is determined
	by finding the unique line passing through that point that is perpendicular to the <a>gradient line</a>.
	The point's color is the color of the <a>gradient line</a>
	at the point where this line intersects it.


<h4 class='no-toc' id='linear-gradient-examples'>Linear Gradient Examples</h4>

	All of the following ''linear-gradient()'' examples are presumed to be backgrounds applied to a box that is 200px wide and 100px tall.

	<div class=example>
		Below are various ways of specifying a basic vertical gradient:

		<pre>
			linear-gradient(yellow, blue);
			linear-gradient(to bottom, yellow, blue);
			linear-gradient(180deg, yellow, blue);
			linear-gradient(to top, blue, yellow);
			linear-gradient(to bottom, yellow 0%, blue 100%);
		</pre>

		<img src="images/linear1.png" alt="" >
	</div>

	<div class=example>
		This demonstrates the use of an angle in the gradient.
		Note that, though the angle is not exactly the same as the angle between the corners,
		the <a>gradient line</a> is still sized so as to make the gradient yellow exactly at the upper-left corner,
		and blue exactly at the lower-right corner.

		<pre>
			linear-gradient(135deg, yellow, blue);
			linear-gradient(-45deg, blue, yellow);
		</pre>

		<img src="images/linear3.png" alt="" >
	</div>

	<div class=example>

		This demonstrates a 3-color gradient, and how to specify the location of a stop explicitly:

		<pre>linear-gradient(yellow, blue 20%, #0f0);</pre>

		<img src="images/linear4.png" alt="" >
	</div>

	<div class=example id='corner-gradient-example'>
		This demonstrates a corner-to-corner gradient specified with keywords.
		Note how the gradient is red and blue exactly in the bottom-left and top-right corners, respectively,
		exactly like the second example.
		Additionally, the angle of the gradient is automatically computed so that the color at 50% (in this case, white)
		stretches across the top-left and bottom-right corners.

		<pre>linear-gradient(to top right, red, white, blue)</pre>

		<object data="images/gradient1.svg" width="200" height="100">(Image requires SVG)</object>
	</div>


<!--
████████     ███    ████████  ████    ███    ██
██     ██   ██ ██   ██     ██  ██    ██ ██   ██
██     ██  ██   ██  ██     ██  ██   ██   ██  ██
████████  ██     ██ ██     ██  ██  ██     ██ ██
██   ██   █████████ ██     ██  ██  █████████ ██
██    ██  ██     ██ ██     ██  ██  ██     ██ ██
██     ██ ██     ██ ████████  ████ ██     ██ ████████
-->


Radial Gradients: the ''radial-gradient()'' notation {#radial-gradients}
------------------------------------------------------------------------

	In a radial gradient,
	rather than colors smoothly fading from one side of the <a>gradient box</a> to the other
	as with linear gradients,
	they instead emerge from a single point
	and smoothly spread outward in a circular or elliptical shape.

	A radial gradient is specified by indicating the center of the gradient
	(where the 0% ellipse will be)
	and the size and shape of the <dfn>ending shape</dfn>
	(the 100% ellipse).
	Color stops are given as a list,
	just as for ''linear-gradient()''.
	Starting from the <a>gradient center</a>
	and progressing towards (and potentially beyond) the <a>ending shape</a>,
	uniformly-scaled concentric ellipses are drawn and colored
	according to the specified color stops.


<h4 class='no-toc' id='radial-gradient-syntax'>radial-gradient() Syntax</h4>

	The radial gradient syntax is:

	<pre>
		<dfn>radial-gradient()</dfn> = radial-gradient(
		  [ <<ending-shape>> || <<size>> ]? [ at <<position>> ]? ,
		  <<color-stop-list>>
		)
	</pre>

	<div class=example>
		Here is an example of a circular radial gradient 5em wide
		and positioned with its center in the top left corner:

		<pre>radial-gradient(5em circle at top left, yellow, blue)</pre>
	</div>

	Note: A future level may add the ability to move the focus of the gradient,
	as in the original -webkit-gradient() function.
	See <a href="http://lists.w3.org/Archives/Public/www-style/2011Nov/0210.html">proposal</a>
	tracked in <a href="https://github.com/w3c/csswg-drafts/issues/1575">Issue 1575</a>
	for "from <<position>>" and "from offset <<offset>>".

	The arguments are defined as follows:

	<dl dfn-type=value dfn-for="radial-gradient(), repeating-radial-gradient()">
		<dt><dfn><<position>></dfn>
		<dd>
			Determines the <dfn dfn lt="gradient center">center</dfn> of the gradient.
			The <<position>> value type
			(which is also used for 'background-position')
			is defined in [[!CSS-VALUES-3]],
			and is resolved using the center-point as the object area
			and the <a>gradient box</a> as the positioning area.
			If this argument is omitted,
			it defaults to ''<position>/center''.

		<dt><dfn><<ending-shape>></dfn>
		<dd>
			Can be either <dfn value for="<ending-shape>">circle</dfn> or <dfn value for="<ending-shape>">ellipse</dfn>;
			determines whether the gradient's <a>ending shape</a> is a circle or an ellipse, respectively.
			If <<ending-shape>> is omitted,
			the <a>ending shape</a> defaults to a circle
			if the <<size>> is a single <<length>>,
			and to an ellipse otherwise.

		<dt><dfn><<size>></dfn>
		<dd>
			Determines the size of the gradient's <a>ending shape</a>.
			If omitted it defaults to ''farthest-corner''.
			It can be given explicitly or by keyword.
			For the purpose of the keyword definitions,
			consider the <a>gradient box</a> edges as extending infinitely in both directions,
			rather than being finite line segments.

			If the ending-shape is an ellipse,
			its axises are aligned with the horizontal and vertical axises.

			Both ''circle'' and ''ellipse'' gradients accept the following keywords as their <dfn type for=''>&lt;size></dfn>:

			<dl dfn-for="<size>">
				<dt><dfn>closest-side</dfn>
				<dd>
					The <a>ending shape</a> is sized so that
					it exactly meets the side of the <a>gradient box</a> closest to the gradient's center.
					If the shape is an ellipse,
					it exactly meets the closest side in each dimension.

				<dt><dfn>farthest-side</dfn>
				<dd>
					Same as ''closest-side'',
					except the <a>ending shape</a> is sized based on the farthest side(s).

				<dt><dfn>closest-corner</dfn>
				<dd>
					The <a>ending shape</a> is sized so that
					it passes through the corner of the <a>gradient box</a> closest to the gradient's center.
					If the shape is an ellipse,
					the <a>ending shape</a> is given the same aspect-ratio it would have if ''closest-side'' were specified.

				<dt><dfn>farthest-corner</dfn>
				<dd>
					Same as ''closest-corner'',
					except the <a>ending shape</a> is sized based on the farthest corner.
					If the shape is an ellipse,
					the <a>ending shape</a> is given the same aspect ratio it would have if ''farthest-side'' were specified.
			</dl>

			If <<ending-shape>> is specified as ''circle'' or is omitted,
			the <<size>> may be given explicitly as:

			<dl>
				<dt><dfn for="<size>">&lt;length></dfn>
				<dd>
					Gives the radius of the circle explicitly.
					Negative values are invalid.

					Note: Percentages are <em>not</em> allowed here;
					they can only be used to specify the size of an elliptical gradient,
					not a circular one.
					This restriction exists because there is are multiple reasonable answers as to which dimension the percentage should be relative to.
					A future level of this module may provide the ability to size circles with percentages,
					perhaps with more explicit controls over which dimension is used.

			</dl>

			If <<ending-shape>> is specified as ''ellipse'' or is omitted,
			<<size>> may instead be given explicitly as:

			<dl>
				<dt><dfn for="<size>"><<length-percentage>>{2}</dfn>
				<dd>
					Gives the size of the ellipse explicitly.
					The first value represents the horizontal radius,
					the second the vertical radius.
					Percentages values are relative to the corresponding dimension of the <a>gradient box</a>.
					Negative values are invalid.
			</dl>
	</dl>

	<div class='note'>
		Expanded with the above definitions,
		the grammar becomes:

		<pre>
			radial-gradient() = radial-gradient(
			  [ [ circle               || <<length>> ]                          [ at <<position>> ]? , |
			    [ ellipse              || <<length-percentage>>{2} ]            [ at <<position>> ]? , |
			    [ [ circle | ellipse ] || <<extent-keyword>> ]                  [ at <<position>> ]? , |
			    at <<position>></span> ,
			  ]?
			  <<color-stop>> [ , <<color-stop>> ]+
			)
			<dfn noexport>&lt;extent-keyword></dfn> = closest-corner | closest-side | farthest-corner | farthest-side
		</pre>
	</div>


<h4 class="no-toc" id="radial-color-stops">Placing Color Stops</h4>

	Color-stops are placed on a <a>gradient line</a> shaped like a ray
	(a line that starts at one point, and extends infinitely in a one direction),
	similar to the <a>gradient line</a> of linear gradients.
	The <a>gradient line's</a> <a>starting point</a> is at the center of the gradient,
	and it extends toward the right,
	with the <a>ending point</a> on the point where the <a>gradient line</a> intersects the <a>ending shape</a>.
	A color-stop can be placed at a location before 0%;
	though the negative region of the <a>gradient line</a> is never directly consulted for rendering,
	color stops placed there can affect the color of non-negative locations on the <a>gradient line</a> through interpolation or repetition
	(see <a section href='#repeating-gradients'>repeating gradients</a>).
	For example, ''radial-gradient(red -50px, yellow 100px)'' produces an elliptical gradient
	that starts with a reddish-orange color in the center
	(specifically, #f50)
	and transitions to yellow.
	Locations greater than 100% simply specify a location a correspondingly greater distance from the center of the gradient.

	The color of the gradient at any point is determined by
	first finding the unique ellipse passing through that point
	with the same center, orientation, and ratio between major and minor axises as the ending-shape.
	The point's color is then the color of the positive section of the <a>gradient line</a> at the location where this ellipse intersects it.

<h4 class="no-toc" id="degenerate-radials">Degenerate Radial Gradients</h4>

	Some combinations of position, size, and shape
	will produce a circle or ellipse with a radius of 0.
	This will occur, for example,
	if the center is on a <a>gradient box</a> edge and ''closest-side'' or ''closest-corner'' is specified
	or if the size and shape are given explicitly and either of the radiuses is zero.
	In these degenerate cases,
	the gradient must be be rendered as follows:

	: If the <a>ending shape</a> is a circle with zero radius:
	:: Render as if the <a>ending shape</a> was
		a circle whose radius was an arbitrary very small number greater than zero.
		<span class='note'>This will make the gradient continue to look like a circle.</span>

	: If the <a>ending shape</a> has zero width (regardless of the height):
	:: Render as if the <a>ending shape</a> was
		an ellipse whose height was an arbitrary very large number
		and whose width was an arbitrary very small number greater than zero.
		<span class='note'>This will make the gradient look similar to a horizontal linear gradient
		that is mirrored across the center of the ellipse.
		It also means that all color-stop positions specified with a percentage resolve to ''0px''.</span>

	: Otherwise, if the <a>ending shape</a> has zero height:
	:: Render as if the <a>ending shape</a> was
		an ellipse whose width was an arbitrary very large number
		and whose height was an arbitrary very small number greater than zero.
		<span class='note'>This will make the gradient look like a solid-color image
		equal to the color of the last color-stop,
		or equal to the average color of the gradient if it's repeating.</span>


<h4 class='no-toc' id='radial-gradient-examples'>Radial Gradient Examples</h4>

	All of the following examples are applied to a box that is 200px wide and 100px tall.

	<div class=example>
		These examples demonstrate different ways to write the basic syntax for radial gradients:

		<pre>
			radial-gradient(yellow, green);
			radial-gradient(ellipse at center, yellow 0%, green 100%);
			radial-gradient(farthest-corner at 50% 50%, yellow, green);
		</pre>

		<img src="images/radial1.png" alt="" >

		<pre>radial-gradient(circle, yellow, green);</pre>

		<img src="images/radial2.png" alt="" >

		<pre>radial-gradient(red, yellow, green);</pre>

		<img src="images/radial3.png" alt="" >
	</div>

	<div class=example>
		This image shows a gradient originating from somewhere other than the center of the box:

		<pre>radial-gradient(farthest-side at left bottom, red, yellow 50px, green);</pre>

		<img src="images/radial4.png" alt="" >
	</div>

	<div class=example>
		Here we illustrate a ''closest-side'' gradient.

		<pre>
			radial-gradient(closest-side at 20px 30px, red, yellow, green);
			radial-gradient(20px 30px at 20px 30px, red, yellow, green);
		</pre>

		<img src="images/radial6.png" alt="" >

		<pre>
			radial-gradient(closest-side circle at 20px 30px, red, yellow, green);
			radial-gradient(20px 20px at 20px 30px, red, yellow, green);
		</pre>

		<img src="images/radial7.png" alt="" >
	</div>

<!--
████████  ████████ ████████  ████████    ███    ████████ ████ ██    ██  ██████
██     ██ ██       ██     ██ ██         ██ ██      ██     ██  ███   ██ ██    ██
██     ██ ██       ██     ██ ██        ██   ██     ██     ██  ████  ██ ██
████████  ██████   ████████  ██████   ██     ██    ██     ██  ██ ██ ██ ██   ████
██   ██   ██       ██        ██       █████████    ██     ██  ██  ████ ██    ██
██    ██  ██       ██        ██       ██     ██    ██     ██  ██   ███ ██    ██
██     ██ ████████ ██        ████████ ██     ██    ██    ████ ██    ██  ██████
-->

Repeating Gradients: the ''repeating-linear-gradient()'' and ''repeating-radial-gradient()'' notations {#repeating-gradients}
------------------------------------------------------------------------------------------------------

	In addition to ''linear-gradient()'' and ''radial-gradient()'',
	this specification defines <dfn caniuse="css-repeating-gradients">repeating-linear-gradient()</dfn>
	and <dfn>repeating-radial-gradient()</dfn> values.
	These notations take the same values
	and are interpreted the same
	as their respective non-repeating siblings defined previously.

	When rendered, however, the color-stops are repeated infinitely in both directions,
	with their positions shifted by multiples of the difference between
	the last specified color-stop's position
	and the first specified color-stop's position.
	For example, ''repeating-linear-gradient(red 10px, blue 50px)''
	is equivalent to ''linear-gradient(..., red -30px, blue 10px, red 10px, blue 50px, red 50px, blue 90px, ...)''.
	Note that the last color-stop and first color-stop will always coincide at the boundaries of each group,
	which will produce sharp transitions if the gradient does not start and end with the same color.

	<div class=example>
		Repeating gradient syntax is identical to that of non-repeating gradients:

		<pre>repeating-linear-gradient(red, blue 20px, red 40px)</pre>
		<img src="images/repeating1.png" alt="">

		<pre>repeating-radial-gradient(red, blue 20px, red 40px)</pre>
		<img src="images/repeating2.png" alt="">

		<pre>repeating-radial-gradient(circle closest-side at 20px 30px, red, yellow, green 100%, yellow 150%, red 200%)</pre>
		<img src="images/repeating3.png" alt="">

	</div>

	If the distance between the first and last color-stops is non-zero,
	but is small enough that the implementation knows that the physical resolution of the output device is insufficient to faithfully render the gradient,
	the implementation must <a lt="gradient-average-color">find the average color of the gradient</a>
	and render the gradient as a solid-color image equal to the average color.

	If the distance between the first and last color-stops is zero
	(or rounds to zero due to implementation limitations),
	the implementation must <a lt="gradient-average-color">find the average color of a gradient</a>
	with the same number and color of color-stops,
	but with the first and last color-stop an arbitrary non-zero distance apart,
	and the remaining color-stops equally spaced between them.
	Then it must render the gradient as a solid-color image equal to that average color.

	If the width of the ending shape of a repeating radial gradient is non-zero
	and the height is zero,
	or is close enough to zero that the implementation knows that the physical resolution of the output device is insufficient to faithfully render the gradient,
	the implementation must <a lt="gradient-average-color">find the average color of the gradient</a>
	and render the gradient as a solid-color image equal to the average color.

	Note: The <a section href="#degenerate-radials">Degenerate Radial Gradients</a> section
	describes how the ending shape is adjusted when its width is zero.

	To <dfn lt="gradient-average-color">find the average color of a gradient</dfn>,
	run these steps:

	1. Define <var>list</var> as an initially-empty list of premultiplied RGBA colors,
		and <var>total-length</var> as the distance between first and last color stops.

	2. For each adjacent pair of color-stops,
		define <var>weight</var> as half the distance between the two color-stops,
		divided by <var>total-length</var>.
		Add two entries to <var>list</var>,
		the first obtained by representing the color of the first color-stop in premultiplied sRGBA
		and scaling all of the components by <var>weight</var>,
		and the second obtained in the same way with the second color-stop.

	3. Sum the entries of <var>list</var> component-wise to produce the average color,
		and return it.

	Note: As usual, implementations may use whatever algorithm they wish,
	so long as it produces the same result as the above.

	<div class='example'>
		For example, the following gradient is rendered as a solid light-purple image (equal to <code>rgb(75%,50%,75%)</code>):

		<pre class="css">repeating-linear-gradient(red 0px, white 0px, blue 0px);</pre>

		The following gradient would render the same as the previous under normal circumstances
		(because desktop monitors can't faithfully render color-stops 1/10th of a pixel apart),
		but would render as a normal repeating gradient if, for example,
		the author applied "zoom:100;" to the element on which the gradient appears:

		<pre class="css">repeating-linear-gradient(red 0px, white .1px, blue .2px);</pre>
	</div>


<!--
 ██████  ████████  ███████  ████████   ██████
██    ██    ██    ██     ██ ██     ██ ██    ██
██          ██    ██     ██ ██     ██ ██
 ██████     ██    ██     ██ ████████   ██████
      ██    ██    ██     ██ ██              ██
██    ██    ██    ██     ██ ██        ██    ██
 ██████     ██     ███████  ██         ██████
-->


Gradient Color-Stops {#color-stop-syntax}
-----------------------------------------

	<pre class=prod>
		<dfn>&lt;color-stop-list></dfn> = <<color-stop>>#{2,}
		<dfn>&lt;color-stop></dfn> = <<color>> <<length-percentage>>?
	</pre>

	The colors in gradients are specified using <a>color stops</a>.
	A <dfn export>color stop</dfn> is a combination of a color and a position.
	<!-- UNCOMMENT FOR L4
	Depending on the type of gradient, that position can be a length, angle, or percentage.
	-->
	While every color stop conceptually has a position,
	the position can be omitted in the syntax,
	in which case it gets automatically filled in by the user agent;
	see below for details.

	The color stops for a gradient are specified
	in a <dfn export>color stop list</dfn>,
	which is a list of two or more <a>color stops</a>,
	specified in geometric order.

	<a>Color stops</a> are placed on a <a>gradient line</a>,
	which defines the colors at every point of a gradient.
	The gradient function defines the shape and length of the <a>gradient line</a>,
	along with its <a>starting point</a> and <a>ending point</a>.

	Percentages refer to the length of the <a>gradient line</a>
	between the <a>starting point</a> and <a>ending point</a>,
	with 0% being at the starting point
	and 100% being at the ending point.
	Lengths are measured along the <a>gradient line</a>
	from the <a>starting point</a>
	in the direction of the <a>ending point</a>.
	<!-- UNCOMMENT FOR L4
	Angles are measured with 0deg pointing up,
	and positive angles corresponding to clockwise rotations from there.
	-->

	<a>Color stops</a> are usually placed between
	the <a>starting point</a> and <a>ending point</a>,
	but that's not required:
	the gradient line extends infinitely in both directions,
	and a <a>color stop</a> can be placed at any position on the <a>gradient line</a>.

	When the position of a <a>color stop</a> is omitted,
	it is positioned automatically
	halfway between the two surrounding stops.
	If multiple stops in a row lack a position,
	they space themselves out equally.

	The following steps must be applied <em>in order</em> to process the list of <a>color stops</a>.
	After applying these rules,
	all <a>color stops</a> will have a definite position and color
	and they will be in ascending order:

	1. If the first <a>color stop</a> does not have a position,
		set its position to 0%.
		If the last <a>color stop</a> does not have a position,
		set its position to 100%.

	2. If a <a>color stop</a> has a position that is less than
		the specified position of any <a>color stop</a> before it in the list,
		set its position to be equal to the largest specified position of any <a>color stop</a> before it.

	3. If any <a>color stop</a> still does not have a position,
		then, for each run of adjacent <a>color stops</a> without positions,
		set their positions so that they are evenly spaced between the preceding and following <a>color stops</a> with positions.

	At each <a>color stop</a> position,
	the line is the color of the <a>color stop</a>.
	Between two <a>color stops</a>,
	the line's color is linearly interpolated between the colors of the two <a>color stops</a>,
	with the interpolation taking place in premultiplied RGBA space.
	Before the first <a>color stop</a>,
	the line is the color of the first <a>color stop</a>.
	After the last <a>color stop</a>, the line is the color of the last <a>color stop</a>.

	If multiple <a>color stops</a> have the same position,
	they produce an infinitesimal transition from the one specified first in the rule
	to the one specified last.
	In effect, the color suddenly changes at that position rather than smoothly transitioning.

	<div class=example>
		Below are several pairs of gradients.
		The latter of each pair is a manually "fixed-up" version of the former,
		obtained by applying the above rules.
		For each pair, both gradients will render identically.
		<span class='note'>The numbers in each arrow specify which fixup steps are invoked in the transformation.</span>

		<pre>
			1. linear-gradient(red, white 20%, blue)
			   =1=>
			   linear-gradient(red 0%, white 20%, blue 100%)

			2. linear-gradient(red 40%, white, black, blue)
			   =13=>
			   linear-gradient(red 40%, white 60%, black 80%, blue 100%)

			3. linear-gradient(red -50%, white, blue)
			   =13=>
			   linear-gradient(red -50%, white 25%, blue 100%)

			4. linear-gradient(red -50px, white, blue)
			   =13=>
			   linear-gradient(red -50px, white calc(-25px + 50%), blue 100%)

			5. linear-gradient(red 20px, white 0px, blue 40px)
			   =2=>
			   linear-gradient(red 20px, white 20px, blue 40px)

			6. linear-gradient(red, white -50%, black 150%, blue)
			   =12=>
			   linear-gradient(red 0%, white 0%, black 150%, blue 150%)

			7. linear-gradient(red 80px, white 0px, black, blue 100px)
			   =23=>
			   linear-gradient(red 80px, white 80px, black 90px, blue 100px)
		</pre>
	</div>

	<div class=example>
		The following example illustrates the difference between
		a gradient transitioning in pre-multiplied sRGBA
		and one transitioning (incorrectly) in non-premultiplied.
		In both of these example,
		the gradient is drawn over a white background.
		Both gradients could be written with the following value:

		<pre>linear-gradient(90deg, red, transparent, blue)</pre>

		In premultiplied space,
		transitions to or from "transparent" always look nice:

		<object data="images/gradient2.svg" width="200"height="100">(Image requires SVG)</object>

		On the other hand,
		if a gradient were to incorrectly transition in non-premultiplied space,
		the colors near "transparent" would noticeably darken to a grayish color,
		because "transparent" is actually a shorthand for ''rgba(0,0,0,0)'', or transparent black:

		<object data="images/gradient3.svg" width="200"height="100">(Image requires SVG)</object>
	</div>

	Note: It is recommended that authors not mix different types of units,
	such as px, em, or %,
	in a single rule,
	as this can cause a <a>color stop</a> to unintentionally try to move before an earlier one.
	For example, the rule ''background-image: linear-gradient(yellow 100px, blue 50%)''
	wouldn't require any fix-up as long as the background area is at least 200px tall.
	If it was 150px tall, however,
	the blue <a>color stop's</a> position would be equivalent to "75px",
	which precedes the yellow <a>color stop</a>,
	and would be corrected to a position of 100px.
	Additionally, since the relative ordering of such color stops
	cannot be determined without performing layout,
	they will not interpolate smoothly in
	<a href="http://www.w3.org/TR/css-animations/">animations</a>
	or <a href="http://www.w3.org/TR/css-transitions/">transitions</a>.

	Note: The definition and implications of "premultiplied" color spaces are given elsewhere in the technical literature,
	but a quick primer is given here to illuminate the process.
	Given a color expressed as an rgba() 4-tuple,
	one can convert this to a premultiplied representation
	by multiplying the red, green, and blue components by the alpha component.
	For example, a partially-transparent blue may be given as rgba(0,0,255,.5),
	which would then be expressed as [0, 0, 127.5, .5] in its premultiplied representation.
	Interpolating colors using the premultiplied representations
	rather than the plain rgba representations
	tends to produce more attractive transitions,
	particularly when transitioning from a fully opaque color to fully transparent.
	Note that transitions where either the transparency or the color are held constant
	(for example, transitioning between rgba(255,0,0,100%) and rgba(0,0,255,100%),
	or rgba(255,0,0,100%) and rgba(255,0,0,0%))
	have identical results whether the color interpolation is done in premultiplied or non-premultiplied color-space.
	Differences only arise when both the color and transparency differ between the two endpoints.


<!--
 ██████  ████ ████████ ████ ██    ██  ██████
██    ██  ██       ██   ██  ███   ██ ██    ██
██        ██      ██    ██  ████  ██ ██
 ██████   ██     ██     ██  ██ ██ ██ ██   ████
      ██  ██    ██      ██  ██  ████ ██    ██
██    ██  ██   ██       ██  ██   ███ ██    ██
 ██████  ████ ████████ ████ ██    ██  ██████
-->


Sizing Images and Objects in CSS {#sizing}
==========================================

	Images used in CSS may come from a number of sources:
	from binary image formats (such as gif, jpeg, etc),
	dedicated markup formats (such as SVG),
	and CSS-specific formats (such as the linear-gradient() value type defined in this specification).
	As well, a document may contain many other types of objects,
	such as video, plugins, or nested documents.
	These images and objects
	(just <dfn noexport local-lt=object>objects</dfn> hereafter)
	may offer many types of sizing information to CSS,
	or none at all.
	This section defines generically the size negotiation model between the object and the CSS layout algorithms.


Object-Sizing Terminology {#sizing-terms}
-----------------------------------------

	In order to define this handling,
	we define a few terms,
	to make it easier to refer to various concepts:

	<dl export>
		<dt><dfn>intrinsic dimensions</dfn>
		<dd>
			The term intrinsic dimensions refers to the set of
			the <dfn>intrinsic height</dfn>,
			<dfn>intrinsic width</dfn>,
			and <dfn>intrinsic aspect ratio</dfn>
			(the ratio between the width and height),
			each of which may or may not exist for a given [=object=].
			These intrinsic dimensions represent a preferred or natural size of the object itself;
			that is, they are not a function of the context in which the object is used.
			CSS does not define how the intrinsic dimensions are found in general.

			Raster images are an example of an [=object=] with all three intrinsic dimensions.
			SVG images designed to scale might have only an <a>intrinsic aspect ratio</a>;
			SVG images can also be created with only an <a>intrinsic width</a> or <a lt="intrinsic height">height</a>.
			CSS gradients, defined in this specification, are an example of an object with no intrinsic dimensions at all.
			Another example of this is embedded documents,
			such as the <{iframe}> element in HTML.
			In general, [=objects=] cannot have only two intrinsic dimensions,
			as any two automatically define the third.
			However some types of replaced elements,
			such as form controls,
			can have an <a>intrinsic width</a> and an <a>intrinsic height</a>,
			but no <a>intrinsic aspect ratio</a>.

			If an [=object=] (such as an icon) has multiple sizes,
			then the largest size (by area) is taken as its intrinsic size.
			If it has multiple aspect ratios at that size,
			or has multiple aspect ratios and no size,
			then the aspect ratio closest to the aspect ratio of the <a>default object size</a> is used.
			Determine this by seeing which aspect ratio produces the largest area
			when fitting it within the <a>default object size</a> using a <a>contain constraint</a> fit;
			if multiple sizes tie for the largest area,
			the widest size is chosen as its intrinsic size.

		<dt><dfn>specified size</dfn>
		<dd>
			The specified size of an [=object=] is given by CSS,
			such as through the 'width' and 'height' or 'background-size' properties.
			The specified size can be a definite width and height,
			a set of constraints,
			or a combination thereof.

		<dt><dfn>concrete object size</dfn>
		<dd>
			The <a>concrete object size</a> is the result of combining
			an [=object’s=] <a>intrinsic dimensions</a> and <a>specified size</a>
			with the <a>default object size</a> of the context it's used in,
			producing a rectangle with a definite width and height.

		<dt><dfn>default object size</dfn>
		<dd>
			The <a>default object size</a> is a rectangle with a definite height and width
			used to determine the <a>concrete object size</a>
			when both the <a>intrinsic dimensions</a> and <a>specified size</a> are missing dimensions.

	</dl>


CSS⇋Object Negotiation {#object-negotiation}
--------------------------------------------

	[=Objects=] in CSS are sized and rendered by the <dfn export>object size negotiation</dfn> algorithm as follows:

	1. When an [=object=] is specified in a document,
		such as through a ''url()'' value in a 'background-image' property
		or a <{img/src}> attribute on an <{img}> element,
		CSS queries the object for its <a>intrinsic dimensions</a>.

	2. Using the <a>intrinsic dimensions</a>,
		the <a>specified size</a>,
		and the <a>default object size</a> for the context the [=object=] is used in,
		CSS then computes a <a>concrete object size</a>.
		(See the <a section href="#default-sizing">following section</a>.)
		This defines the size and position of the region the [=object=] will render in.

	3. CSS asks the [=object=] to render itself at the <a>concrete object size</a>.
		CSS does not define how [=objects=] render when the <a>concrete object size</a> is different from the [=object’s=] <a>intrinsic dimensions</a>.
		The [=object=] may adjust itself to match the <a>concrete object size</a> in some way,
		or even render itself larger or smaller than the <a>concrete object size</a> to satisfy sizing constraints of its own.

	4. Unless otherwise specified by CSS,
		the [=object=] is then clipped to the <a>concrete object size</a>.


Concrete Object Size Resolution {#concrete-size-resolution}
-----------------------------------------------------------

	Currently the rules for sizing [=objects=] are described in each context that such [=objects=] are used.
	This section defines some common sizing constraints
	and how to resolve them
	so that future specs can refer to them instead of redefining size resolution in each instance.

### Default Sizing Algorithm ### {#default-sizing}

	The <dfn export>default sizing algorithm</dfn> is a set of rules commonly used to find an [=object’s=] <a>concrete object size</a>.
	It resolves the simultaneous constraints presented by the [=object’s=] <a>intrinsic dimensions</a>
	and either an unconstrained <a>specified size</a>
	or one consisting of only a definite width and/or height.

	Some [=object=] sizing rules
	(such as those for 'list-style-image')
	correspond exactly to the <a>default sizing algorithm</a>.
	Others
	(such as those for 'border-image')
	invoke the default sizing algorithm
	but also apply additional sizing rules before arriving at a final <a>concrete object size</a>.

	The <a>default sizing algorithm</a> is defined as follows:

	* If the <a>specified size</a> is a definite width and height,
		the <a>concrete object size</a> is given that width and height.

	* If the <a>specified size</a> is only a width or height (but not both)
		then the <a>concrete object size</a> is given that specified width or height.
		The other dimension is calculated as follows:

		1. If the [=object=] has an <a>intrinsic aspect ratio</a>,
			the missing dimension of the <a>concrete object size</a>
			is calculated using the <a>intrinsic aspect ratio</a> and the present dimension.

		2. Otherwise, if the missing dimension is present in the object's <a>intrinsic dimensions</a>,
			the missing dimension is taken from the [=object’s=] <a>intrinsic dimensions</a>.

		3. Otherwise, the missing dimension of the <a>concrete object size</a> is taken from the <a>default object size</a>.

	* If the <a>specified size</a> has no constraints:

		1. If the [=object=] has an intrinsic height or width,
			its size is resolved as if its <a>intrinsic dimensions</a> were given as the <a>specified size</a>.

		2. Otherwise, its size is resolved as a <a>contain constraint</a> against the <a>default object size</a>.

### Cover and Contain Constraint Sizing ### {#cover-contain}

	Two other common specified sizes are the <a>contain constraint</a> and the <a>cover constraint</a>,
	both of which are resolved against a specified <dfn export>constraint rectangle</dfn>
	using the [=object’s=] <a>intrinsic aspect ratio</a>:

	* A <dfn export>contain constraint</dfn> is resolved
		by setting the <a>concrete object size</a> to the largest rectangle that has the [=object’s=] <a>intrinsic aspect ratio</a>
		and additionally has neither width nor height larger than the constraint rectangle's width and height, respectively.

	* A <dfn export>cover constraint</dfn> is resolved
		by setting the <a>concrete object size</a> to the smallest rectangle that has the [=object’s=] <a>intrinsic aspect ratio</a>
		and additionally has neither width nor height smaller than the constraint rectangle's width and height, respectively.

	In both cases,
	if the object doesn't have an intrinsic aspect ratio,
	the <a>concrete object size</a> is the specified constraint rectangle.

Examples of CSS Object Sizing {#object-sizing-examples}
-------------------------------------------------------

	<div class="example">
		The following examples show how the <a href="https://www.w3.org/TR/CSS2/">CSS 2.1</a>
		and <a href="https://www.w3.org/TR/css3-background/">CSS3 Backgrounds &amp; Borders</a> sizing algorithms
		correspond to concepts defined in this specification.

		<dl>
			<dt>'background-image'
			<dd>
				The rules for calculating the <a>concrete object size</a> of a background
				are defined in <a href="https://www.w3.org/TR/CSS2/colors.html#background-properties">CSS2.1§14.2.1</a>
				and <a href="https://www.w3.org/TR/css3-background/#the-background-size">CSS3BG§3.9</a>.
				CSS2.1 uses the <a>default sizing algorithm</a>
				with no <a>specified size</a>
				and the <a>background positioning area</a> as the <a>default object size</a>. [[!CSS2]]
				In CSS3, 'background-size' property can give a sizing constraint,
				invoking either the <a>default sizing algorithm</a>
				or one of the <a lt="contain constraint">contain</a> or <a lt="cover constraint">cover</a> constraints.
				The concrete object size is further adjusted in later steps if 'background-repeat' has a ''background-repeat/round'' value. [[CSS3BG]]

			<dt>'list-style-image'
			<dd>
				The rules for calculating the <a>concrete object size</a> of a list-style image
				are defined in <a href="https://www.w3.org/TR/CSS2/generate.html#propdef-list-style-image">CSS2.1§12.5.1</a>.
				They use the <a>default sizing algorithm</a>
				with no <a>specified size</a>
				and a <a>default object size</a> of 1em square.

			<dt>'border-image'
			<dd>
				Border images are sized twice:
				first the entire image is sized to determine the slice points,
				then the slices are sized to decorate the border.
				The first sizing operation is defined in <a href="https://www.w3.org/TR/css3-background/#the-border-image-slice">CSS3BG§6.2</a>
				and uses the <a>default sizing algorithm</a>
				with no <a>specified size</a>,
				and the <a href="https://www.w3.org/TR/css3-background/#border-image-area">border image area</a> as the <a>default object size</a>.
				The second operation is defined in <a href="https://www.w3.org/TR/css3-background/#border-image-process">CSS3BG§6.2</a>:
				the <a>default sizing algorithm</a> is used to determine an initial size for each slice
				with the corresponding <a>border image area</a> part as the default object size.
				By default the <a>specified size</a> matches this <a>default object size</a>;
				however the 'border-image-repeat' property can drop the specified size in one or more directions
				and may also apply an additional rounding step. [[CSS3BG]]


			<dt>'cursor'
			<dd>
				The rules for calculating the <a>concrete object size</a> of a cursor
				are defined in <a href="https://www.w3.org/TR/CSS2/ui.html#cursor-props">CSS2.1 § 18.1: Cursors</a>.
				The <a>default object size</a> is a UA-defined size
				that should be based on the size of a typical cursor on the UA's operating system.  [[!CSS2]]

			<dt>'content'
			<dd>
				Objects inserted via the CSS2.1 'content' property
				are anonymous <a href="https://www.w3.org/TR/CSS2/conform.html#replaced-element">replaced elements</a>,
				and are sized the same way. [[!CSS2]]
				Note that such anonymous elements have all their non-inherited properties (including 'width', 'height', etc.)
				set to their initial values.

			<dt><a href="https://www.w3.org/TR/CSS2/conform.html#replaced-element">replaced elements</a>
			<dd>
				<a href="https://www.w3.org/TR/CSS2/">CSS 2.1</a> defines the sizing of replaced elements
				(including those inserted as <a href="https://www.w3.org/TR/CSS2/generate.html#content">generated content</a> via 'content')
				in sections <a href="https://www.w3.org/TR/CSS2/visudet.html#inline-replaced-width">10.3.2</a>,
				<a href="https://www.w3.org/TR/CSS2/visudet.html#min-max-widths">10.4</a>,
				<a href="https://www.w3.org/TR/CSS2/visudet.html#inline-replaced-height">10.6.2</a>,
				and <a href="https://www.w3.org/TR/CSS2/visudet.html#min-max-heights">10.7</a>. [[!CSS2]]
				The 'object-fit' property defined below defines how the <a>concrete object size</a> corresponds to the element's used width and height;
				by default they coincide.
		</dl>
	</div>

<!--
 ███████  ████████        ██ ████████  ██████  ████████         ████████ ████ ████████
██     ██ ██     ██       ██ ██       ██    ██    ██            ██        ██     ██
██     ██ ██     ██       ██ ██       ██          ██            ██        ██     ██
██     ██ ████████        ██ ██████   ██          ██    ███████ ██████    ██     ██
██     ██ ██     ██ ██    ██ ██       ██          ██            ██        ██     ██
██     ██ ██     ██ ██    ██ ██       ██    ██    ██            ██        ██     ██
 ███████  ████████   ██████  ████████  ██████     ██            ██       ████    ██
-->

Sizing Objects: the 'object-fit' property {#the-object-fit}
-----------------------------------------------------------

	<pre class='propdef'>
	Name: object-fit
	Value: fill | contain | cover | none | scale-down
	Initial: fill
	Applies to: replaced elements
	Inherited: no
	Percentages: n/a
	Computed value: specified keyword
	Animation type: discrete
	</pre>

	The 'object-fit' property specifies how the contents of a replaced element
	should be fitted to the box established by its used height and width.

	<dl dfn-type=value dfn-for=object-fit>
		<dt><dfn>fill</dfn>
		<dd>
			The replaced content is sized to fill the element's content box:
			the object's <a>concrete object size</a> is the element's used width and height.

		<dt><dfn>contain</dfn>
		<dd>
			The replaced content is sized to maintain its aspect ratio
			while fitting within the element's content box:
			its <a>concrete object size</a> is resolved as a <a>contain constraint</a>
			against the element's used width and height.

		<dt><dfn>cover</dfn>
		<dd>
			The replaced content is sized to maintain its aspect ratio
			while filling the element's entire content box:
			its <a>concrete object size</a> is resolved as a <a>cover constraint</a>
			against the element's used width and height.

		<dt><dfn>none</dfn>
		<dd>
			The replaced content is not resized to fit inside the element's content box:
			determine the object's <a>concrete object size</a>
			using the <a>default sizing algorithm</a> with no specified size,
			and a <a>default object size</a> equal to the replaced element's used width and height.

		<dt><dfn>scale-down</dfn>
		<dd>
			Size the content as if ''object-fit/none'' or ''object-fit/contain'' were specified,
			whichever would result in a smaller <a>concrete object size</a>.

			Note: Both ''object-fit/none'' and ''object-fit/contain'' respect the content's intrinsic aspect ratio,
			so the concept of "smaller" is well-defined.
	</dl>

	If the content does not completely fill the replaced element's content box,
	the unfilled space shows the replaced element's background.
	Since replaced elements always clip their contents to the content box,
	the content will never overflow.
	See the 'object-position' property for positioning the object with respect to the content box.

	<figure>
		<img src="images/img_scale.png" style="border: thin solid black;" alt="">

		<figcaption>
			An example showing how four of the values of 'object-fit' cause the replaced element (blue figure)
			to be scaled to fit its height/width box (shown with a green background),
			using the initial value for 'object-position'.
			The fifth value, ''scale-down'',
			in this case looks identical to ''object-fit/contain''.
		</figcaption>
	</figure>

	Note: The 'object-fit' property has similar semantics to
	the <code>fit</code> attribute in [[SMIL10]]
	and the <<meetOrSlice>> parameter
	on the <a href="https://www.w3.org/TR/SVG11/coords.html#PreserveAspectRatioAttribute"><code>preserveAspectRatio</code> attribute</a> in [[SVG11]].

	Note: Per the <a>object size negotiation</a> algorithm,
	the <a>concrete object size</a>
	(or, in this case, the size of the content)
	does not directly scale the object itself -
	it is merely passed to the object as information about the size of the visible canvas.
	How to then draw into that size is up to the image format.
	In particular, raster images always scale to the given size,
	while SVG uses the given size as the size of the "SVG Viewport"
	(a term defined by SVG)
	and then uses the values of several attributes on the root <code>&lt;svg></code> element to determine how to draw itself.

<!--
 ███████  ████████        ██ ████████  ██████  ████████         ████████   ███████   ██████  ████ ████████ ████  ███████  ██    ██
██     ██ ██     ██       ██ ██       ██    ██    ██            ██     ██ ██     ██ ██    ██  ██     ██     ██  ██     ██ ███   ██
██     ██ ██     ██       ██ ██       ██          ██            ██     ██ ██     ██ ██        ██     ██     ██  ██     ██ ████  ██
██     ██ ████████        ██ ██████   ██          ██    ███████ ████████  ██     ██  ██████   ██     ██     ██  ██     ██ ██ ██ ██
██     ██ ██     ██ ██    ██ ██       ██          ██            ██        ██     ██       ██  ██     ██     ██  ██     ██ ██  ████
██     ██ ██     ██ ██    ██ ██       ██    ██    ██            ██        ██     ██ ██    ██  ██     ██     ██  ██     ██ ██   ███
 ███████  ████████   ██████  ████████  ██████     ██            ██         ███████   ██████  ████    ██    ████  ███████  ██    ██
-->

Positioning Objects: the 'object-position' property {#the-object-position}
--------------------------------------------------------------------------

	<pre class='propdef'>
	Name: object-position
	Value: <<position>>
	Initial: 50% 50%
	Applies to: replaced elements
	Inherited: no
	Percentages: refer to width and height of element itself
	Computed value: as for 'background-position'
	Animation type: as for 'background-position'
	Canonical Order: the horizontal component of the <<position>>, followed by the vertical component
	</pre>

	The 'object-position' property determines the alignment of the replaced element inside its box.
	The <<position>> value type
	(which is also used for 'background-position')
	is defined in [[!CSS-VALUES-3]],
	and is resolved using the <a>concrete object size</a> as the object area
	and the content box as the positioning area.

	Note: Areas of the box not covered by the replaced element will show the element's background.



Image Processing {#image-processing}
====================================

<!--
████ ██     ██    ███     ██████   ████████          ███████  ████████  ████ ████████ ██    ██ ████████    ███    ████████ ████  ███████  ██    ██
 ██  ███   ███   ██ ██   ██    ██  ██               ██     ██ ██     ██  ██  ██       ███   ██    ██      ██ ██      ██     ██  ██     ██ ███   ██
 ██  ████ ████  ██   ██  ██        ██               ██     ██ ██     ██  ██  ██       ████  ██    ██     ██   ██     ██     ██  ██     ██ ████  ██
 ██  ██ ███ ██ ██     ██ ██   ████ ██████   ███████ ██     ██ ████████   ██  ██████   ██ ██ ██    ██    ██     ██    ██     ██  ██     ██ ██ ██ ██
 ██  ██     ██ █████████ ██    ██  ██               ██     ██ ██   ██    ██  ██       ██  ████    ██    █████████    ██     ██  ██     ██ ██  ████
 ██  ██     ██ ██     ██ ██    ██  ██               ██     ██ ██    ██   ██  ██       ██   ███    ██    ██     ██    ██     ██  ██     ██ ██   ███
████ ██     ██ ██     ██  ██████   ████████          ███████  ██     ██ ████ ████████ ██    ██    ██    ██     ██    ██    ████  ███████  ██    ██
-->

<h3 id="the-image-orientation" caniuse="css-image-orientation">Orienting an Image on the Page: the 'image-orientation' property </h3>

	Issue: This property is likely going to be deprecated and its functionality moved to HTML.
	At minimum, it will likely lose all but its initial value and ''image-orientation/from-image''.

	If a picture is taken with a camera turned on its side,
	or a document isn't positioned correctly within a scanner,
	the resultant image may be "sideways" or even upside-down.
	The 'image-orientation' property provides a way to apply an "out-of-band" rotation to image source data to correctly orient an image.

	Note: This property is not intended to specify layout transformations
	such as arbitrary rotation or flipping the image in the horizontal or vertical direction.
	(See [[CSS-TRANSFORMS-1]] for a feature designed to do that.)
	It is also not needed to correctly orient an image when printing in landscape versus portrait orientation,
	as that rotation is done as part of layout. (See [[CSS3PAGE]].)
	It should only be used to correct incorrectly-oriented images.

	<pre class='propdef'>
	Name: image-orientation
	Value: none | from-image | <<angle>> | [ <<angle>>? flip ]
	Initial: none
	Applies to: all elements
	Inherited: yes
	Computed value: the specified keyword, or an <<angle>>, rounded and normalized (see text), plus optionally a ''flip'' keyword
	Animation type: discrete
	</pre>

	This property specifies an orthogonal rotation to be applied to an image before it is laid out.
	It applies only to content images
	(e.g. replaced elements and generated content),
	not decorative images
	(such as 'background-image').
	CSS layout processing applies to the image <em>after</em> rotation.
	This implies, for example:

	* The intrinsic height and width are derived from the rotated rather than the original image dimensions.
	* The height (width) property applies to the vertical (horizontal) dimension of the image,
		<em>after</em> rotation.

	Values other than ''image-orientation/none'' and ''from-image'' are
	<em>optional</em> to implement and <em>deprecated</em> in CSS.
	Values have the following meanings:

	<dl dfn-type=value dfn-for=image-orientation>
		<dt><dfn>none</dfn>
		<dd>
			No additional rotation is applied:
			the image is oriented as encoded.

		<dt><dfn>from-image</dfn>
		<dd>
			If the image has an orientation specified in its metadata,
			such as EXIF,
			this value computes to the angle that the metadata specifies is necessary to correctly orient the image.
			If necessary, this angle is then rounded and normalized as described above for an <<angle>> value.
			If there is no orientation specified in its metadata,
			this value computes to ''0deg''.

		<dt><dfn><<angle>></dfn>
		<dd>
			Positive values cause the image to be rotated to the right
			(in a clockwise direction),
			while negative values cause a rotation to the left.
			The computed value of the property is calculated
			by moduloing the value by ''1turn''
			(so that it lies in the half-open range [''0turn'', ''1turn'')),
			then rounding it to the nearest quarter-turn,
			rounding away from 0
			(so ''45deg'' rounds to ''90deg'', etc).

		<dt><dfn><<angle>>? flip</dfn>
		<dd>
			Identical to the plain <<angle>> case,
			except that after rotation the image is flipped horizontally.
			If the <<angle>> is omitted,
			it defaults to ''0deg''.

			Note: This value is only necessary to represent all 8 possible EXIF orientations that <a value for=image-orientation>from-image</a> can produce.
	</dl>

	The 'image-orientation' property must be applied before any other transformations,
	such as using CSS Transforms.

	<div class="example">
		The following example rotates the image 90 degrees clockwise:

		<pre>
			img.ninety     { image-orientation: 90deg }
			...
			&lt;img class="ninety" src=...>
		</pre>

		The same effect could be achieved with, for example,
		an angle of -270deg or 450deg.
	</div>

<!--
████ ██     ██    ███     ██████   ████████         ████████  ████████ ██    ██ ████████  ████████ ████████  ████ ██    ██  ██████
 ██  ███   ███   ██ ██   ██    ██  ██               ██     ██ ██       ███   ██ ██     ██ ██       ██     ██  ██  ███   ██ ██    ██
 ██  ████ ████  ██   ██  ██        ██               ██     ██ ██       ████  ██ ██     ██ ██       ██     ██  ██  ████  ██ ██
 ██  ██ ███ ██ ██     ██ ██   ████ ██████   ███████ ████████  ██████   ██ ██ ██ ██     ██ ██████   ████████   ██  ██ ██ ██ ██   ████
 ██  ██     ██ █████████ ██    ██  ██               ██   ██   ██       ██  ████ ██     ██ ██       ██   ██    ██  ██  ████ ██    ██
 ██  ██     ██ ██     ██ ██    ██  ██               ██    ██  ██       ██   ███ ██     ██ ██       ██    ██   ██  ██   ███ ██    ██
████ ██     ██ ██     ██  ██████   ████████         ██     ██ ████████ ██    ██ ████████  ████████ ██     ██ ████ ██    ██  ██████
-->

Determining How To Scale an Image: the 'image-rendering' property {#the-image-rendering}
----------------------------------------------------------------------------------------

	<pre class='propdef'>
	Name: image-rendering
	Value: auto | smooth | high-quality | crisp-edges | pixelated
	Initial: auto
	Applies to: all elements
	Inherited: yes
	Computed value: specified keyword
	Animation type: discrete
	</pre>

	The 'image-rendering' property provides a hint to the user-agent
	about what aspects of an image are most important to preserve when the image is scaled,
	to aid the user-agent in the choice of an appropriate scaling algorithm.
	When specified on an element,
	it applies to all images given in properties for the element,
	such as background images,
	list-style images,
	or the content of replaced elements when they represent an image that must be scaled.
	The values of the 'image-rendering' property are interpreted as follows:

	<dl dfn-type=value dfn-for=image-rendering>
		<dt><dfn>auto</dfn>
		<dd>
			The scaling algorithm is UA dependent.

		<dt><dfn>smooth</dfn>
		<dd>
			The image should be scaled with an algorithm that maximizes the appearance of the image.
			In particular, scaling algorithms that "smooth" colors are acceptable,
			such as bilinear interpolation.
			This is intended for images such as photos.

		<dt><dfn>high-quality</dfn>
		<dd>
			Identical to ''image-rendering/smooth'',
			but with a preference for higher-quality scaling.
			If system resources are constrained,
			images with ''high-quality'' should be prioritized over those with any other value,
			when considering which images to degrade the quality of
			and to what degree.

			<div class=note>
				This value <em>does not</em> prevent the image quality from being degraded
				when the system resources are constrained.
				It merely expresses a preference that these images should receive extra scaling resources
				relative to the ''image-rendering/auto'' images.
				If all images on the page have ''high-quality'' applied,
				it's equivalent to all of them having ''image-rendering/auto'' applied--
				they're all treated the same.

				To get the most value out of ''high-quality'',
				only apply it to the most important images on the page.
			</div>

			Issue: The name of this value is currently being discussed.

		<dt><dfn caniuse="css-crisp-edges">crisp-edges</dfn>
		<dd>
			The image must be scaled with an algorithm that preserves contrast and edges in the image,
			and which does not smooth colors or introduce blur to the image in the process.
			This is intended for images such as pixel art.

		<dt><dfn>pixelated</dfn>
		<dd>
			The image must be scaled with the "nearest neighbor" or similar algorithm,
			to preserve a "pixelated" look as the image changes in size.
	</dl>

	This property does not dictate any particular scaling algorithm to be used.
	For example, with ''image-rendering: auto'',
	a user agent might scale images with bilinear interpolation by default,
	switch to nearest-neighbor interpolation in high-load situations,
	and switch to a high-quality scaling algorithm like Lanczos interpolation for static images that aren't moving or changing.
	Similarly, with 'image-rendering: crisp-edges',
	a user agent might scale images with nearest-neighbor interpolation by default,
	and switch to EPX interpolation in low-load situations.

	<div class='example'>
		For example, given the following small image:

		<figure>
			<img src="images/pixel-art-small.gif">
			<figcaption>A small pixel-art image.
		</figure>

		Scaling it up 3x might look like the following,
		depending on the value of 'image-rendering':

		<figure>
			<img src="images/pixel-art-small.gif" width=384>
			<figcaption>The image scaled with ''image-rendering/auto''</figcaption>
		</figure>

		<figure>
			<img src="images/pixel-art-nn.png">
			<figcaption>The image scaled with ''pixelated''</figcaption>
		</figure>

		<figure>
			<img src="images/pixel-art-smooth.png">
			<figcaption>
				The image scaled with ''crisp-edges''.<br>
				<small>(Or it might look like ''pixelated'',
				or as another type of pixel-scaling algorithm,
				depending on the browser.)</small>
			</figcaption>
		</figure>
	</div>

	This property previously accepted the values ''optimizeSpeed'' and ''optimizeQuality''.
	These are now deprecated;
	a user agent must accept them as valid values
	but must treat them as having the same behavior as ''pixelated'' and ''image-rendering/auto'' respectively,
	and authors must not use them.


<!--
████ ██    ██ ████████ ████████ ████████  ████████   ███████  ██          ███    ████████ ████  ███████  ██    ██
 ██  ███   ██    ██    ██       ██     ██ ██     ██ ██     ██ ██         ██ ██      ██     ██  ██     ██ ███   ██
 ██  ████  ██    ██    ██       ██     ██ ██     ██ ██     ██ ██        ██   ██     ██     ██  ██     ██ ████  ██
 ██  ██ ██ ██    ██    ██████   ████████  ████████  ██     ██ ██       ██     ██    ██     ██  ██     ██ ██ ██ ██
 ██  ██  ████    ██    ██       ██   ██   ██        ██     ██ ██       █████████    ██     ██  ██     ██ ██  ████
 ██  ██   ███    ██    ██       ██    ██  ██        ██     ██ ██       ██     ██    ██     ██  ██     ██ ██   ███
████ ██    ██    ██    ████████ ██     ██ ██         ███████  ████████ ██     ██    ██    ████  ███████  ██    ██
-->

Interpolation {#interpolation}
==============================

	Interpolation of <<image>> values is not defined in this level.
	Implementations must abruptly transition them
	(at 50% transition progress, like other unsupported interpolations),
	unless otherwise defined by a future specification.

	Note: CSS Images Level 4 is expected to define specialized interpolation for gradients,
	and define that all other images interpolate by cross-fading.

<!--
 ██████  ████████ ████████  ████    ███    ██       ████ ████████    ███    ████████ ████  ███████  ██    ██
██    ██ ██       ██     ██  ██    ██ ██   ██        ██       ██    ██ ██      ██     ██  ██     ██ ███   ██
██       ██       ██     ██  ██   ██   ██  ██        ██      ██    ██   ██     ██     ██  ██     ██ ████  ██
 ██████  ██████   ████████   ██  ██     ██ ██        ██     ██    ██     ██    ██     ██  ██     ██ ██ ██ ██
      ██ ██       ██   ██    ██  █████████ ██        ██    ██     █████████    ██     ██  ██     ██ ██  ████
██    ██ ██       ██    ██   ██  ██     ██ ██        ██   ██      ██     ██    ██     ██  ██     ██ ██   ███
 ██████  ████████ ██     ██ ████ ██     ██ ████████ ████ ████████ ██     ██    ██    ████  ███████  ██    ██
-->

Serialization {#serialization}
==============================

	This section describes the serialization of all new properties and value types introduced in this specification,
	for the purpose of interfacing with the CSS Object Model [[CSSOM]].

	To serialize any function defined in this module,
	serialize it per its individual grammar,
	in the order its grammar is written in,
	omitting components when possible without changing the meaning,
	joining space-separated tokens with a single space,
	and following each serialized comma with a single space.

	<div class='example'>
		For example, a gradient specified as:

		<pre>Linear-Gradient( to bottom, red 0%,yellow,black 100px)</pre>

		must serialize as:

		<pre>linear-gradient(red, yellow, black 100px)</pre>
	</div>

<h2 class="no-num" id="privsec">
Privacy and Security Considerations</h2>

This specification allows rendering of cross-origin images by default,
which exposes some information of those images programmatically--
specifically, the intrinsic sizes and resolution of those images.

<h2 class="no-num" id="acknowledgments">
Acknowledgments</h2>

Thanks to the Webkit team, Brad Kemper, Brian Manthos, and Alan Gresley
   for their contributions to the definition of gradients; to Melinda Grant
   for her work on 'object-fit', 'object-position', and 'image-orientation';
   <!-- to Robert O'Callahan for the definition of ''element()'';  to
   Michael Day, Håkon Lie, and Shinyu Murakami for 'image-resolution' --> and to L. David Baron,
   Kang-Hao Lu, Leif Arne Storset, Erik Dahlstrom, and Øyvind Stenhaug for
   their careful review, comments, and corrections.

<h2 class="no-num" id="changes">
Changes</h2>

<h3 class="no-num" id="changes-20120407">
Changes Since the <a href="https://www.w3.org/TR/2012/CR-css3-images-20120417/">17 April 2012 Candidate Recommendation</a></h3>

	Major changes include:

	- The <css>image()</css> notation has been deferred to Level 4.
	- The <css>image-resolution</css> property has been deferred to Level 4
	- The 'image-orientation' property has been marked as At-Risk,
		the ''from-image'' and ''image-orientation/none'' keywords,
		and the <<angle>> values deprecated.
	- Added the 'image-rendering' property
	- Added the ''cross-fade()'' notation

<h3 class=no-num id=changes-last-call>
Changes Since Last Call</h3>

	Major changes include:


	- The <css>element()</css> feature has been deferred to Level 4.
	- The directional images feature
		(''ltr''/''rtl''annotations in ''image()'')
		has been deferred to Level 4 to address some design-level feedback.
	- Images referenced with unsupported URL fragment syntax
		are now considered invalid (and trigger fallback) within ''image()''.
	- The 'object-fit' property no longer resizes the element's content box in any cases.
	- The 'image-orientation' property is now inherited.


	Significant details updated:


	- There is now a definition for <a>invalid images</a>,
		which trigger fallback in the ''image()'' notation.
	- Clarified that media fragments are only required to be supported within ''image()''
		in order to satisfy the prerequisite for supporting ''image()''.
	- Defined how to determine the closeness of two aspect ratios
		(used in the definition of <a href="#intrinsic-dimensions"><i>intrinsic dimensions</i></a>).
	- Corrected error in which 'image-orientation' was applied after CSS transforms.
	- The 'object-fit' and 'object-position' properties
		can no longer be aliased to <css>image-fit</css> and <css>image-position</css>.
		A future edition of the <a href="http://www.w3.org/TR/css-print/">CSS Print Profile</a>
		may allow this for printer implementations, however.

	There were also many clarifications
	and several sections were rearranged to make them easier to read.

	The <a href="http://dev.w3.org/csswg/css3-images/issues-lc-2012">Disposition of Last Call Comments</a> is available.