Overview.bs

<pre class='metadata'>
Title: CSS Backgrounds and Borders Module Level 4
Shortname: css-backgrounds
Level: 4
Status: ED
Work Status: Exploring
Group: csswg
TR: https://www.w3.org/TR/css-backgrounds-4/
ED: https://drafts.csswg.org/css-backgrounds-4/
Editor: Bert Bos, W3C, bert@w3.org, w3cid 3343
Editor: Elika J. Etemad / fantasai, Invited Expert, http://fantasai.inkedblade.net/contact, w3cid 35400
Editor: Lea Verou, Invited Expert, http://lea.verou.me/about/, w3cid 52258
Abstract: This module contains the features of CSS relating to the borders and backgrounds of boxes on the page. It includes and extends the functionality of <a href="https://www.w3.org/TR/css3-background/">CSS Backgrounds and Borders Level&nbsp;3</a>. [[CSS3BG]] The main extensions compared to level&nbsp;3 are shaping ('corner-shape') and clipping borders ('border-clip'), logical background positions ('background-position'), and the ''extend'' ability of 'background-repeat'.
Ignored Terms:
Warning: Not Ready
</pre>

<h2 id="intro">
Introduction</h2>

	<p class="issue">
		This module is currently maintained as a diff against Level 3.
		We will fold in the text once it's all formatted up and in CR again,
		as this will reduce the effort of keeping them in sync
		(source diffs will be accurate in reflecting the differences).

<h2 id="backgrounds">
Backgrounds</h2>

<h3 id="the-background-position">
Background Positioning: the 'background-position' shorthand property</h3>

	<pre class="propdef shorthand">
		Name: background-position
		Value: <<position>>#
	</pre>

	See [[CSS3BG]] for definition.

	<p>Where
	<pre class=prod><dfn>&lt;position&gt;</dfn> = [
	  [ left | center | right | top | bottom | start | end | <<length-percentage>> ]
	|
	  [ left | center | right | x-start | x-end | <<length-percentage>> ]
	  [ top | center | bottom | y-start | y-end | <<length-percentage>> ]
	|
	  [ center | [ left | right | x-start | x-end ] <<length-percentage>>? ] &amp;&amp;
	  [ center | [ top | bottom | y-start | y-end ] <<length-percentage>>? ]
	|
	  [ center | [ start | end ] <<length-percentage>>? ]
	  [ center | [ start | end ] <<length-percentage>>? ]	]</pre>

	Values have the following meanings:
	<dl>
		<dt>One value
		<dd>
			If only one value is given,
			and that value is ''background-position/start'' or ''background-position/end'',
			then the keyword is duplicated;
			otherwise the second keyword defaults to ''background-position/center''.
			The resulting value is treated as a two-component value.

		<dt>More than one value
		<dd>
			If the value contains a ''background-position/start'' or ''background-position/end'' keyword,
			then the shorthand sets
			'background-position-inline' and 'background-position-block' to the specified values.
			Otherwise
			the shorthand sets
			'background-position-x' and 'background-position-y' to the specified values.

			Issue: Specify the value assignment in more detail. Should expand just like Level 3.
	</dl>

	Issue: Specify what happens to set of properties that are not set. Maybe they're just not set?

<h4 id="background-position-longhands">
Background Positioning Longhands: the 'background-position-x', 'background-position-y', 'background-position-inline', and 'background-position-block' properties</h4>

	Issue: This section is still being worked out. The tricky thing is making all the start/end keywords work sanely.

	<pre class="propdef">
		Name: background-position-x
		Value: [ center | [ left | right | x-start | x-end ]? <<length-percentage>>? ]#
		Initial: left
		Inherited: no
		Percentages: refer to width of background positioning area <em>minus</em> width of background image
		Computed value: A list, each item consisting of: an offset given as a combination of an absolute length and a percentage, plus an origin keyword
	</pre>

	This property specifies the background position's horizontal component.
	An omitted origin keyword is assumed to be ''left''.

	<pre class="propdef">
		Name: background-position-y
		Value: [ center | [ top | bottom | y-start | y-end ]? <<length-percentage>>? ]#
		Initial: left
		Inherited: no
		Percentages: refer to height of background positioning area <em>minus</em> height of background image
		Computed value: A list, each item consisting of: an offset given as a combination of an absolute length and a percentage, plus an origin keyword
	</pre>

	This property specifies the background position's vertical component.
	An omitted origin keyword is assumed to be ''top''.

	<pre class="propdef">
		Name: background-position-inline
		Value: [ center | [ start | end ]? <<length-percentage>>? ]#
		Initial: not applicable (initial value comes from physical property)
		Inherited: no
		Percentages: refer to inline-size of background positioning area <em>minus</em> inline-size of background image
		Computed value: A list, each item consisting of: an offset given as a combination of an absolute length and a percentage, plus an origin keyword
	</pre>

	This property specifies the background position's inline-axis component.
	An omitted origin keyword is assumed to be ''background-position-inline/start''.

	<pre class="propdef">
		Name: background-position-block
		Value: [ center | [ start | end ]? <<length-percentage>>? ]#
		Initial: not applicable (initial value comes from physical property)
		Inherited: no
		Percentages: refer to size of background positioning area <em>minus</em> size of background image
		Computed value: A list, each item consisting of: an offset given as a combination of an absolute length and a percentage, plus an origin keyword
	</pre>

	This property specifies the background position's block-axis component.
	An omitted origin keyword is assumed to be ''background-position-block/start''.

<h3 id='background-clip'>
Painting Area: the 'background-clip' property</h3>

	<pre class="propdef partial">
	Name: background-clip
	New Values: text, border
	</pre>

	Issue: Or should this be defining the <css>-webkit-background-clip</css> property,
	saying that all the values are identical,
	with this additional ''text'' value?

	<dl dfn-type=value dfn-for=background-clip>
		<dt><dfn>text</dfn>
		<dd>
			The background is painted within (clipped to)
			the intersection of the border box
			and the geometry of the text in the element and its in-flow and floated descendants.

		<dt><dfn>border</dfn></dt>
		<dd>
			The background is clipped to the area painted by the border, taking 'border-width' and 'border-style' into account but ignoring any transparency introduced by 'border-color'.
		</dd>
	</dl>

<h2 id="borders">
	Borders</h2>

	<h3 id="the-border-color">Line Colors: the 'border-color' properties</h3>

	<table class="propdef">
	  <tr>
	    <th>Name:
	    <td><dfn>border-top-color</dfn> ,
	        <dfn>border-right-color</dfn>,
	        <dfn>border-bottom-color</dfn>,
	        <dfn>border-left-color</dfn>
	  <tr>
	    <th><a href="#values">Value</a>:
	    <td><<color>>#
	  <tr>
	    <th>Initial:
	    <td><a href="https://www.w3.org/TR/css3-color/#currentcolor">currentColor</a>
	  <tr>
	    <th>Applies to:
	    <td>all elements
	  <tr>
	    <th>Inherited:
	    <td>no
	  <tr>
	    <th>Percentages:
	    <td>N/A
	  <tr>
	    <th>Media:
	    <td>visual
	  <tr>
	    <th>Computed value:
	    <td>the computed color
	  <tr>
	    <th>Animatable:
	    <td>See prose
	</table>

	<table class="propdef">
	  <tr>
	    <th>Name:
	    <td><dfn id="border-color">border-color</dfn>
	  <tr>
	    <th><a href="#values">Value</a>:
	    <td>(<<color>>{1,4})#
	  <tr>
	    <th>Initial:
	    <td>(see individual properties)
	  <tr>
	    <th>Applies to:
	    <td>all elements
	  <tr>
	    <th>Inherited:
	    <td>no
	  <tr>
	    <th>Percentages:
	    <td>N/A
	  <tr>
	    <th>Media:
	    <td>visual
	  <tr>
	    <th>Computed value:
	    <td>see individual properties
	  <tr>
	    <th>Animatable:
	    <td>see individual properties
	</table>

	<p>These properties set the foreground color of the border specified
	by the <span class=property>border-style</span> properties.
	If a list of values is provided, the border is split into equal width bands of each color
	along the direction of the side the border is applied on (i.e. split horizontally on left and right borders and vertically on top and bottom borders),
	starting outwards.

	<p>When interpolating between borders with the same number of colors, interpolation is performed individually per color band as <a href="https://www.w3.org/TR/css3-transitions/#animtype-color">color</a>.
		Interpolation between borders with different numbers of colors is discrete.

	<p>'Border-color' is a shorthand for the
	four 'border-*-color' properties. The four values set the top, right,
	bottom and left border, respectively. A missing left is the same as
	right, a missing bottom is the same as top, and a missing right is
	also the same as top. This is resolved individually for each list item.

	<div class="example">
		Using multiple colors for each side:

		<pre>
			border: 30px solid;
			border-color: skyblue orange yellowgreen indianred, black yellow;
		</pre>

		Sample rendering:

		<img src="images/multicolor-border.png" alt="">

		The same border colors with 'border-style: dotted':

		<img src="images/multicolor-border-dotted.png" alt="">
	</div>

	Issue: The syntax for comma-separated multiple colors <a href="https://github.com/w3c/csswg-drafts/issues/1172#issuecomment-379878579">is still under active discussion</a> in the CSS WG.

<h2 id="corners">
Corners</h2>

<h3 id=corner-sizing>
Corner Sizing: the 'border-radius property</h3>

	<pre class="propdef">
		Name: border-radius
		Value: <<length-percentage>>{1,4} [ / <<length-percentage>>{1,4} ]?
		Initial: 0
		Applies to: all elements, except table element when 'border-collapse' is ''collapse''
		Inherited: no
	</pre>

	See [[CSS3BG]].

<h3 id=corner-shaping>
Corner Shaping: the 'corner-shape' property</h3>

	<pre class="propdef">
		Name:            corner-shape
		Value:           [ round | bevel | scoop | notch ]{1,4}
		Initial:         round
		Applies to:      all elements, except table element when 'border-collapse' is ''collapse''
		Inherited:       no
	</pre>

	By default, non-zero border-radii define
	a quarter-ellipse that rounds the affected corners.
	However in some cases, other corner shapes are desired.
	The 'corner-shape' property specifies a reinterpretation of the radii
	to define other corner shapes.

	<dl dfn-type="value" dfn-for="corner-shape">
		<dt><dfn>''round''</dfn>
		<dd>Border radii define a convex elliptical curve at the corner.
		<dt><dfn>''bevel''</dfn>
		<dd>Border radii define a diagonal slice at the corner.
		<dt><dfn>''scoop''</dfn>
		<dd>Border radii define a concave elliptical curve at the corner.
		<dt><dfn>''notch''</dfn>
		<dd>Border radii define a concave rectangular notch at the corner.
	</dl>

	<div class="example">
		For example, the following declarations create a right-pointing next button.
		<pre>
			a {
				border-radius: 0 2em 2em 0;
				corner-shape: bevel;
				padding: 0.5em 2em 0.5em 0.5em;
		</pre>
		As a fallback in UAs that don't support 'border-radius',
		the right side would be rounded rather than pointy.
	</div>

	<p class="issue">
		For ''scoop'' and ''notch'', how do the color/style/width transitions work?
		Do they transition once in the middle, or alternate to match the topness/sideness of that segment of the border?

	<p class="issue">
		Add a ''cubic-bezier()'' function for random other shapes?
		Or some other functions?

<h3 id="corners-shorthand">
Corner Shape and Size: the 'corners' shorthand</h3>

	<pre class="propdef shorthand">
		Name: corners
		Value: <<'corner-shape'>> || <<'border-radius'>>
	</pre>

	The 'corners' shorthand sets 'corner-shape' and 'border-radius' in the same declaration.
	If either is omitted, it is reset to its initial value.

	<div class="example">
		For example, the following declaration creates a diamond shape.
		<pre>corners: bevel 50%;</pre>
		In UAs that don't support 'corner-shape', the declaration is ignored
		(falls back to a rectangle).
	</div>

	<div class="example">
		In this example, the first declaration creates tabs with vertical sides and rounded corners using 'border-radius',
		while the second example makes them trapezoid-shaped in UAs that support 'corners'.
		<pre>
			border-radius: 0.25em 0.25em 0 0;
			corners: bevel 0.25em 0.25em 0 0 / 50% 50% 0 0;
		</pre>
	</div>

<h2 id="partial-borders">
Partial borders</h2>

	<p>CSS borders traditionally cover an entire border edge. Sometimes,
	however, it can be useful to hide some parts of the border.

	<p class="issue">
		Here are two proposals for doing this:
		the second one is from GCPM, the first one is an attempt to recast it more readably.
		The names are terrible, known problem, proposals accepted.
		There is a problem with conceiving this as clipping:
		if you have dotted borders, you want whole dots always, not parts of dots.
		So it should be a drawing limit, not a clip.

<h3 id="border-limit">
Partial Borders: the 'border-limit' property</h3>

	<pre class="propdef">
  	Name: border-limit
  	Value: all | [ sides | corners ] <<length-percentage>>?
  				| [ top | right | bottom | left ] <<length-percentage>>
  	Initial: round
  	Applies to: all elements, except table element when 'border-collapse' is ''collapse''
  	Inherited: no
  	Percentages: relative to border-box
	</pre>

	<p>By default, the entire border is drawn. However, border rendering can be
		limited to only part of a border. The keyword specifies which part, and
		the length or percentage specifies how much.

	<dl dfn-type="value" dfn-for="border-limit">
		<dt><dfn>''sides''</dfn>
			<dd>The sides are drawn up to but not including the corners (as defined
			by the border radii). A length or percentage is measured from the center
			of each side: ''50%'' draws the middle 50% of the border; by default the
			entire side is drawn.
		<dt><dfn>''corners''</dfn>
			<dd>The corners are drawn plus the specified distance into the sides if
			specified. A length is measured from the closest edge of the corner area.
			A percentage is measured from the absolute corner of the border box.
		<dt><dfn>''left''</dfn>
		<dt><dfn>''right''</dfn>
			<dd>For the left and right (vertical) sides, draws the entire side and
			corner. For the top and bottom (horizontal) sides, draws the left/right
			portion, as specified. Distances are measured as for ''corners''.
		<dt><dfn>''top''</dfn>
		<dt><dfn>''bottom''</dfn>
			<dd>For the top and bottom (horizontal) sides, draws the entire side and
			corner. For the left and right (vertical) sides, draws the top/bottom
			portion, as specified. Distances are measured as for ''corners''.
	</dl>

	<div class="example">
		<p>The following example draws only the middle 50% of the sides.</p>
		<pre>box { border: solid; border-parts: sides 50% }</pre>
		<p>The following example draws only the curved parts of the corners.</p>
		<pre>box { border: solid; border-radius: 1em 2em; border-parts: corners; }</pre>
		<p>The following example draws only the left 4em of the top border.</p>
		<pre>box { border-top: solid; border-parts: left 4em; }
		<p>The following example draws only the first 10px of each corner:</p>
		<pre>box { border: solid; border-parts: corners 10px; }</pre>
		<p>The following example draws the curved part of the corner plus 5px
		along ths sides:</p>
		<pre>box { border: solid; border-radius: 5px; border-shape: scoop; border-parts: corners 5px; }</pre>
		<p>The following example draws the curved part of the corner and all of
		the side except the middle 40%.</p>
		<pre>box { border: solid; border-radius: 5px; border-shape: scoope; border-parts: corners 30%; }</pre>
	</div>

<h3 id="border-clip">
The 'border-clip' properties</h3>

		<pre class="propdef">
  		Name: border-clip, border-clip-top, border-clip-right, border-clip-bottom, border-clip-left
  		Value: normal | [ <<length-percentage>> | <<flex>> ]+
  		Initial: normal
  		Inherited: no
  		Percentages: refer to length of border-edge side
  		Computed value: ''border-clip/normal'', or a list consisting of absolute lengths, or percentages as specified
		</pre>

		<p class=issue>Should these properties be simplified to only accept <code>normal | <<length-percentage>>+</code>?

		<p>These properties split their respective borders into parts along
		the border edge. The first part is visible, the second is invisible,
		the third part is visible, etc. Parts can be specified with lengths,
		percentages, or flexible lengths (expressed by the ''fr'' unit, as per
		[[CSS3GRID]]).
		The ''border-clip/normal'' value means
		that the border is not split, but shown normally.

		<p>'border-clip' is a shorthand property for the four individual properties.

		<p>If the listed parts are shorter than the border, any remaining
		border is split proportionally between the specified flexible lengths. If
		there are no flexible lengths, the behavior is as if ''1fr'' had been
		specified at the end of the list.

		<p>If the listed parts are longer than the border, the specified parts
		will be shown in full until the end of the border. In this case, all
		flexible lengths will be zero.

		<p>For horizontal borders, parts are listed from left to right. For
		vertical borders, parts are listed from top to bottom.

		<p>The exact border parts are determined by laying out the specified border
		parts with all flexible lengths initially set to zero. Any remaining border is
		split proportionally between the flexible lengths specified.

		<div class="example">

			<pre>border-clip: 10px 1fr 10px;</pre>

			<div style="position: relative; width: 250px; height: 150px; background: white;">
				<div style="border: 2px solid black; width: 200px; height: 100px; position: absolute; top: 20px; left: 20px">
					<div style="position: absolute; background: white; left: 15px; top: -5px; height: 110px; width: 170px"></div>
					<div style="position: absolute; background: white; left: -5px; top: 15px; height: 70px; width: 210px"></div>
				</div>
			</div>
		</div>

		<div class="example">

			<pre>
				border-clip-top: 10px 1fr 10px;
				border-clip-bottom: 10px 1fr 10px;
				border-clip-right: 5px 1fr 5px;
				border-clip-left: 5px 1fr 5px;
			</pre>
			<div style="position: relative; width: 250px; height: 150px; background: white;">
				<div style="border: 2px solid black; width: 200px; height: 100px; position: absolute; top: 20px; left: 20px">
					<div style="position: absolute; background: white; left: 15px; top: -5px; height: 110px; width: 170px"></div>
					<div style="position: absolute; background: white; left: -5px; top: 5px; height: 90px; width: 210px"></div>
				</div>
			</div>
		</div>

		<div class="example">

			<p>By making the first part have zero length, the inverse border of
			the previous example can easily be created:

			<pre>
				border-clip-top: 0 10px 1fr 10px;
				border-clip-bottom: 0 10px 1fr 10px;
				border-clip-right: 0 5px 1fr 5px;
				border-clip-left: 0 5px 1fr 5px;
			</pre>

		<div style="position: relative; width: 250px; height: 150px; background: white;">
			<div style="border: 2px solid black; width: 200px; height: 100px; position: absolute; top: 20px; left: 20px">
				<div style="position: absolute; background: white; left: -5px; top: -5px; height: 10px; width: 15px"></div>
				<div style="position: absolute; background: white; right: -5px; top: -5px; height: 10px; width: 15px"></div>
				<div style="position: absolute; background: white; left: -5px; top: 95px; height: 10px; width: 15px"></div>
				<div style="position: absolute; background: white; right: -5px; top: 95px; height: 10px; width: 15px"></div>
			</div>
		</div>
	</div>

		<div class="example">
			<pre>
				border: thin solid black;
				border-clip: 0 1fr; /* hide borders */
				border-clip-top: 10px 1fr 10px; /* make certain borders visible */
				border-clip-bottom: 10px 1fr 10px;
			</pre>

			<div style="position: relative; width: 250px; height: 150px; background: white;">
				<div style="border: 2px solid black; width: 200px; height: 100px; position: absolute; top: 20px; left: 20px">
					<div style="position: absolute; background: white; left: 15px; top: -5px; height: 110px; width: 170px"></div>
					<div style="position: absolute; background: white; left: -5px; top: 0px; height: 100px; width: 210px"></div>
				</div>
			</div>
	</div>

	<div class="example">
		<pre>
	<!-- -->border-top: thin solid black;
	<!-- -->border-bottom: thin solid black;
	<!-- -->border-clip-top: 10px;
	<!-- -->border-clip-bottom: 10px;
	<!-- --></pre>

		<div style="position: relative; width: 250px; height: 150px; background: white;">
			<div style="border: 2px solid black; width: 200px; height: 100px; position: absolute; top: 20px; left: 20px">
				<div style="position: absolute; background: white; left: 15px; top: -5px; height: 110px; width: 200px"></div>
				<div style="position: absolute; background: white; left: -5px; top: 0px; height: 100px; width: 210px"></div>
			</div>
		</div>
	</div>

	<div class="example">
		<pre>
			border-top: thin solid black;
			border-clip: 10px;
		</pre>
		<div style="position: relative; width: 250px; height: 150px; background: white;">
			<div style="border: 2px solid black; width: 200px; height: 100px; position: absolute; top: 20px; left: 20px">
				<div style="position: absolute; background: white; left: 15px; top: -5px; height: 110px; width: 200px"></div>
				<div style="position: absolute; background: white; left: -5px; top: 0px; height: 110px; width: 210px"></div>
			</div>
		</div>
	</div>

	<div class="example">
		<p>This rendering:
		<div style="background: white; padding: 0.2em 0.5em">
			<pre style="margin-left: 0">
				A sentence consists of words&#xB9;.
			</pre>
			<div style="width: 3em; height: 2px; background: black"></div>
			<pre style="margin-left: 0">
				&#xB9; Most often.
			</pre>
		</div>
		can be achieved with this style sheet:
		<pre>
			@footnote {
				border-top: thin solid black;
				border-clip: 4em;
			}
		</pre>
	</div>

	<div class="example">
		<pre>
			border: 2px solid black;
			border-top-parts: repeat(10px 10px);
		</pre>
		<p>In this example, the repeat pattern is shown five times and there is, by coincidence,	no remaining border.
		<div style="position: relative; width: 100px; background: white; padding: 20px">
			<div style="border: 2px solid black; height: 40px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 30px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 50px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 70px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 90px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 110px"></div>
		</div>
	</div>

	<div class="example">
		<pre>
			border: 2px solid black;
			border-top-parts: repeat(10px 10px);
		</pre>
		<p>In this example, the repeat pattern is shown five times. The box in this example is slightly wider than the box in the previous example. The remaining border is taken up by a flexible length, as if this code had been specified:
		<pre>
			border: 2px solid black;
			border-top-parts: repeat(10px 10px) 1fr;
		</pre>
		<div style="position: relative; width: 105px; background: white; padding: 20px">
			<div style="border: 2px solid black; height: 40px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 30px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 50px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 70px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 90px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 2px; top: 20px; left: 110px"></div>
			<div style="position: absolute; background: red; width: 5px; height: 2px; top: 20px; left: 120px"></div>
		</div>
		<p>The fragment is shown in red for illustrative purposes; it should be shown in black by a compliant UA.
	</div>

	<div class="example">
		<pre>
			border: 4px solid black;
			border-top-parts: 40px 20px 0 1fr repeat(20px 20px) 0 1fr 40px;
		</pre>
		<p>In this example, there will be a visible 40px border part on each end of the top border. Inside the 40px border parts, there will be an invisible border part of at least 20px. Inside these invisible border parts, there will be visible border parts, each 20px long with 20px invisible border parts between them.
		<div style="position: relative; width: 192px; background: white; padding: 40px">
			<div style="border: 4px solid black; height: 40px"></div>
			<div style="position: absolute; background: white; width: 20px; height: 4px; top: 40px; left: 80px"></div>
			<div style="position: absolute; background: red; width: 6px; height: 4px; top: 40px; left: 100px"></div>
			<div style="position: absolute; background: white; width: 20px; height: 4px; top: 40px; left: 126px"></div>
			<div style="position: absolute; background: white; width: 20px; height: 4px; top: 40px; left: 166px"></div>
			<div style="position: absolute; background: red; width: 6px; height: 4px; top: 40px; left: 186px"></div>
		</div>
		<p>The fragments are shown in red for illustrative purposes; they should not be visible in compliant UAs.
	</div>

	<div class="example">
		<pre>
			border: 4px solid black;
			border-top-parts: 40px 20px 0 1fr 20px 20px 0 1fr 40px;
		</pre>
		<p>In this example, there will be a visible 40px border part on each end of the top border. Inside the 40px border parts, there will be an invisible border part of at least 20px. Inside these invisible border parts, there will be visible border parts, each 20px long with 20px invisible border parts between them.
		<div style="position: relative; width: 192px; background: white; padding: 40px">
			<div style="border: 4px solid black; height: 40px"></div>
			<div style="position: absolute; background: white; width: 20px; height: 4px; top: 40px; left: 80px"></div>
			<div style="position: absolute; background: red; width: 6px; height: 4px; top: 40px; left: 100px"></div>
			<div style="position: absolute; background: white; width: 20px; height: 4px; top: 40px; left: 126px"></div>
			<div style="position: absolute; background: white; width: 20px; height: 4px; top: 40px; left: 166px"></div>
			<div style="position: absolute; background: red; width: 6px; height: 4px; top: 40px; left: 186px"></div>
		</div>
		<p>The fragments are shown in red for illustrative purposes; they should not be visible in compliant UAs.
	</div>

	<div class="example">
		<pre>
			border: 4px solid black;
			border-clip-top: 3fr 10px 2fr 10px 1fr 10px 10px 10px 1fr 10px 2fr 10px 3fr;
		</pre>

		<p>All but one of the visible border parts are represented as flexible lengths in this example. The length of these border parts will change when the width of the element changes. Here is one rendering where 1fr ends up being 10px:
		<div style="position: relative; width: 190px; background: white; padding: 40px">
			<div style="border: 4px solid black; border-top: none; height: 40px"></div>
			<div style="position: absolute; background: red; width: 30px; height: 4px; top: 40px; left: 40px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 70px"></div>
			<div style="position: absolute; background: red; width: 20px; height: 4px; top: 40px; left: 80px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 100px"></div>
			<div style="position: absolute; background: red; width: 10px; height: 4px; top: 40px; left: 110px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 120px"></div>
			<div style="position: absolute; background: black; width: 10px; height: 4px; top: 40px; left: 130px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 140px"></div>
			<div style="position: absolute; background: red; width: 10px; height: 4px; top: 40px; left: 150px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 160px"></div>
			<div style="position: absolute; background: red; width: 20px; height: 4px; top: 40px; left: 170px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 190px"></div>
			<div style="position: absolute; background: red; width: 30px; height: 4px; top: 40px; left: 200px"></div>
		</div>

		<p>Here is another rendering where 1fr ends up being 30px:

		<div style="position: relative; width: 440px; background: white; padding: 40px">
			<div style="border: 4px solid black; border-top: none; height: 40px"></div>
			<div style="position: absolute; background: red; width: 90px; height: 4px; top: 40px; left: 40px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 130px"></div>
			<div style="position: absolute; background: red; width: 60px; height: 4px; top: 40px; left: 140px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 200px"></div>
			<div style="position: absolute; background: red; width: 30px; height: 4px; top: 40px; left: 210px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 240px"></div>
			<div style="position: absolute; background: black; width: 10px; height: 4px; top: 40px; left: 250px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 260px"></div>
			<div style="position: absolute; background: red; width: 30px; height: 4px; top: 40px; left: 270px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 300px"></div>
			<div style="position: absolute; background: red; width: 60px; height: 4px; top: 40px; left: 310px"></div>
			<div style="position: absolute; background: white; width: 10px; height: 4px; top: 40px; left: 370px"></div>
			<div style="position: absolute; background: red; width: 90px; height: 4px; top: 40px; left: 390px"></div>
		</div>
		<p>The fragments are shown in red for illustrative purposes; they should be black in compliant UAs.
	</div>

<h2 id="changes">
Changes</h2>

<h3 id="level-changes">
Additions Since Level 3</h3>

	<p class="issue">Additions are a work in progress... here's what we're planning to add. :)

	<ul>
		<li>logical 'background-position' values (''background-position/start'', ''background-position/end'')
		<li>the ''extend'' keyword of 'background-repeat'
		<li>'corner-shape'
		<li>multiple border colors per border
		<li>logical border properties
		<li><a href="#partial-borders">Partial Borders</a> (make part of border shorthand as well!)
		<li><a href="http://lists.w3.org/Archives/Public/www-style/2012Oct/0314.html">More <css>border-radius</css> shorthands</a> for doing both corners on a side at once.
		<li>Splitting horizontal / vertical spread radius for box-shadow, if we can come up with a sane syntax for it.
	</ul>

<h2 id="acknowledgments">Acknowledgments</h2>

	<p>In addition to the many contributors to the [[CSS1]], [[CSS21]],
	and [[CSS3BG]] predecessors to this module,
	the editors would like to thank
	Tab Atkins,
	and Håkon Wium Lie
	for their suggestions and feedback specifically for this Level 4.