Scribd
Upload
31K views

Ericsson WinFIOL OSS Commands

This document lists 22 Oss commands for managing and monitoring elements in a mobile network such as cells, channels, devices, and alarms. The commands can be used to view information on cells, traffic groups (TG), channel configurations (CF), transmitters (TRX), transmitters (TX), traffic frequencies (TF), alarms, software versions, and more. Administrators can also block, deblock, out of service, and in service these network elements using the appropriate commands.

Uploaded by

Fachriansyah Fachruddin
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
31K views

Ericsson WinFIOL OSS Commands

This document lists 22 Oss commands for managing and monitoring elements in a mobile network such as cells, channels, devices, and alarms. The commands can be used to view information on cells, traffic groups (TG), channel configurations (CF), transmitters (TRX), transmitters (TX), traffic frequencies (TF), alarms, software versions, and more. Administrators can also block, deblock, out of service, and in service these network elements using the appropriate commands.

Uploaded by

Fachriansyah Fachruddin
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Oss commands

1. To see the TG of particular cellrxtcp:moty=rxotg,cell=(cell name);

2. To see the cf with faults


rxmfp:mo=rxocf-(tgno.);

3. To see the tgrxcdp:mo=rxotg-(tgno.);

4. To see the all tru status


rxmfp:mo=rxotrx-(tgno.)-(trutei);

5. To see the cf
rxmsp:mo=rxocf-(tgno);

6. To see all the devices


rxapp:mo=rxotg-(tgno);

7. To see alarm
rxasp:mo=rxocf-(tgno.);

8. To see all cf of BSC


rlcrp:cell=all;

9. To see all data of Cell


rlcrp:cell=(cellname);

10. To see the the software version and cabinet type,BTS-tie value
rxmop:mo=rxocf-(tgno);

11. To see external alarm for level 1


allip:acl=a1;

for level 2
allip:acl=a2;

12. to BLOCK the CF


rxbli:mo=rxocf-(tgno),subord,force;

the trx
rxbli:mo=rxotrx-(tgno)-(trutei),subord, force;

the tx
rxbli:mo=rxotx-(tgno)-truei),force;

the tf rxbli:mo=rxotf-(tgno),force; 13. To Deblock the CF


rxble:mo=rxocf-(tgno),subord;

the trx
rxble:mo=rxotrx-(tgno)-(trutei)subord;

the tx
rxble:mo=rxotx-(tgno)-(trutei);

the tf rxble:mo=rxotf-(tgno); 14. To get the Dip name


rxapp:mo=rxotg-(tgno); radep:dev=(device of cf); ntcop:snt=(etmno);

15. To see the Dip


dtstp:dip=(dipname);

16. To see quality of dip


dtqup:dip=(dipname);

17. To reset the dip


dtqsr:dip=(dipname),sf,degr,unacc;

18. To see all halted cell in bsc


rlcrp:cell=all,state=halt;

19. To out of service cf rxese:mo=rxocf-(tgno),subord; trx rxese:mo=rxotrx-(tgno)-(trutei),subord; tx rxese:mo=rxotx-(tgno)-(trutei); tf rxese:mo=rxotf-(tgno); 20. To in service cf rxesi:mo=rxocf-(tgno),subord; trx rxesi:mo=rxotrx-(tgno)-(trutei),subord; tx rxesi:mo=rxotx-(tgno)-(trutei); tf rxesi:mo=rxotf-(tgno); 21. Some Tip

1. Firstly block the______ 2. Then out of service the___________ 3 Then in service the____________ 4. And then de block the___________ 22. To check the channel rxbdp:cell=(cellname); rxbdc:cell=(cellnm),

You might also like