Scribd
Upload
373 views

Abis Optimization Procedure On Ericsson BSC

This document contains commands to configure a radio channel group (RXOTG-384) to use single carrier mode on a cell (E019C). It halts and blocks the cell and traffic group, defines the single carrier group and connection, changes signaling modes to single carrier, reconnects transmitters to the single carrier, then unblocks and activates the cell and traffic group.

Uploaded by

Job Munyaneza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
373 views

Abis Optimization Procedure On Ericsson BSC

This document contains commands to configure a radio channel group (RXOTG-384) to use single carrier mode on a cell (E019C). It halts and blocks the cell and traffic group, defines the single carrier group and connection, changes signaling modes to single carrier, reconnects transmitters to the single carrier, then unblocks and activates the cell and traffic group.

Uploaded by

Job Munyaneza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Which TG?

<rxtcp:moty=rxotg,cell=E019C;
RADIO X-CEIVER ADMINISTRATION
TG TO CHANNEL GROUP CONNECTION DATA
MO

CELL

RXOTG-384

CHGR

E019C

E019C

0
1

!Halt the Cells!

RLSTC:CELL=E019C,STATE=HALTED;

!Block the TG!

RXBLI:MO=RXOTG-384,SUBORD,FORCE;
RXESE:MO=RXOTG-384,SUBORD;

!Remove TDM Abis Path!

RXAPE:MO=RXOTG-384,DCP=ALL;

!Block the RBLT2 Devices!

STDEP:DEV=RBLT2-1249&&-1279;
BLODI:DEV=RBLT2-1249&&-1279;

!Define SCGR & SC!

RRSGI:SCGR=384,MODE=SCM;
RRSCI:SCGR=384,SC=0,DEV1=RBLT2-1249,DCP=1,NUMDEV=31;
//RRSCE:SCGR=41,SC=0;

!Delete Old CONC!

RXMOP:MO=RXOCON-384;
RXMOE:MO=RXOCON-384;

!Change Sig Mode for CF & TRXs!

RXMOC:MO=RXOCF-384,SIG=SCCONC;

RXMOC:MO=RXOTRX-384-0,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-1,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-2,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-3,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-4,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-5,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-6,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-7,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-8,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-9,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-10,SIG=SCCONC;
RXMOC:MO=RXOTRX-384-11,SIG=SCCONC;

!Change TG TMODE!

RXMOC:MO=RXOTG-384,ABISALLOC=FIXED;
RXMOC:MO=RXOTG-384,TMODE=SCM,SCGR=384;
RXMOC:MO=RXOTG-384,PACKALG=1;

RXATC:MO=RXOTG-384,SDFRMAABISTHR=77;
RXATC:MO=RXOTG-384,SDHRAABISTHR=68;
RXATC:MO=RXOTG-384,SDAMRREDABISTHR=100;

!Redefine the Conc!

RXMOI:MO=RXOCON-384,DCP=350&&581;

!Connect TRXs to SC!

RXMOC:MO=RXOTRX-384-0,SC=0;
RXMOC:MO=RXOTRX-384-1,SC=0;
RXMOC:MO=RXOTRX-384-2,SC=0;
RXMOC:MO=RXOTRX-384-3,SC=0;
RXMOC:MO=RXOTRX-384-4,SC=0;
RXMOC:MO=RXOTRX-384-5,SC=0;
RXMOC:MO=RXOTRX-384-6,SC=0;
RXMOC:MO=RXOTRX-384-7,SC=0;
RXMOC:MO=RXOTRX-384-8,SC=0;
RXMOC:MO=RXOTRX-384-9,SC=0;
RXMOC:MO=RXOTRX-384-10,SC=0;
RXMOC:MO=RXOTRX-384-11,SC=0;

! Deblock TG!

RXESI:MO=RXOTG-384,SUBORD;
RXBLE:MO=RXOTG-384,SUBORD;

!Activate the Cells!


RLSTC:CELL=E019C,STATE=ACTIVE;

rxmsp:mo=RXOTG-384,subord;
rlstp:cell=E019C;
rlcrp:cell=E019C;

You might also like