Scribd
Upload
895 views

Commands 2G Ericsson PDF

This document provides commands for checking and modifying network parameters using the WinFIOL tool. It includes commands to check the BSC and MSC list, cell status and calls, planned parameters, neighbor relations, alarms, active/halt states, TRX blocking, parameter changes like BCCH, BSIC, CGI, HSN, power levels, ACCMIN, BA list, TA limit, media flicks, and external cell creation. Commands are also listed for checking parameters and alarms using the Nokia OSS tool.

Uploaded by

Faiz Ahmed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
895 views

Commands 2G Ericsson PDF

This document provides commands for checking and modifying network parameters using the WinFIOL tool. It includes commands to check the BSC and MSC list, cell status and calls, planned parameters, neighbor relations, alarms, active/halt states, TRX blocking, parameter changes like BCCH, BSIC, CGI, HSN, power levels, ACCMIN, BA list, TA limit, media flicks, and external cell creation. Commands are also listed for checking parameters and alarms using the Nokia OSS tool.

Uploaded by

Faiz Ahmed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

WinFIOL Commands

To check BSC and MSC list in the Network


eac_esi_config -nelist //msc & bsc list

To check cell status and call status/ To Check speech on time slot
(Cell down or not and call is processing or not )

RLCRP:CELL=CELLNAME; //FOR CHECKING CALL IN A PARTICULAR CELL

// FOR CHECKING CELL STATUS IN A PARTICULAR BSC


RLCRP:CELL= ALL;

To check planned parameters

RLDEP:CELL=CELLNAME; //CHECKING CGI,BSIC, BCCH OF CELL


NEIGHBOR DEFINITION & DELETION

To check/work on neighbor related data


RLNRP:CELL=CELLNAME,CELLR=ALL,NODATA; //CHECK NEIGHBOUR RELATION OF
A PARTICULAR CELL
RLNRI:CELL=CELLNAMR,CELLR=CELLNAME; //CREATE NEIGHBOUR RELATION
WITH A CELL
RLNRE:CELL=CELLNAME,CELLR=CELLNAME; //DELETE A PARTICULAR
NEIGHBOR RELATION
RLNRC:CELL=CELLNAME,PARAMETER=?; //CHANGE A NEIGHBOUR
PARAMETER VALUE
RLNRI:CELL=CELLNAMR,CELLR=CELLNAME,SINGLE;
//CREATE INTER BSC NEIGHBOR
RELATION
ALARM CHECK
RXTCP:MOTY=RXOTG,CELL=CELLNAME; //FOR CHECKING A TG NO OF A SITE
RXASP:MO=RXOTG - TGNO; //CHECKING ALARM ON PARTICULAR TRX
RXMFP:MO=RXOtg-Tg no, subord, faulty;
RXMFP:MO=RXOTRX-Tg No.- TRx no, subord, faulty;
ACTIVE & HALT STATE
RXSTP:CELL=CELLNAME,STATE=HALTED; //USED WHEN PARAMETER CHANGE

RXSTC:CELL=CELLNAME,STATE=ACTIVE; //CHANGE STATE OF SITE TO ACTIVE


AFTER SUCCESSFUL PARAMETER
CHANGE
TRX BLOCK
RXTCP:MOTY=RXOTG,CELL=CELLNAME; //CHECK TG NO
RXCDP:MO=RXOTG-TGN0; //ON WHICH PARTICULAR TRX BCCH IS
DEFINED & TO CHECK TRX DETAILS

RXBLI:MO=RXOTRX-TGNO-TRx No,FORCE,SUBORD; // BLOCKING OF PARTICULAR TRX

RXBLE:MO=RXOTRX-TGNO-SUBORD; //DEBLOCKING OF PARTICULAR TRX


PARAMETER CHANGE
RLDEC:CELL=CELLNAME,BCCHNO=?; //CHANGE BCCH OF a particular cell

RLDEC:CELL=CELLNAME,BSIC=?; //CHANGE BSIC OF a particular cell

RLDEC:CELL=XXX,CGI=XXX; // CGI CHANGE

To check/change HSN
rlcfp:cell=cell name;
rlchc:cell=cell name, CHGR=1, HSN=35; //CHANGE HSN OF a particular cell

To check/change POWER
RLCPP:CELL=CELL NAME; //Power check
RLCPC:CELL=CELLNAME,BSPWRB=?; //power change
PARAMETER CHANGE
TO change CGI in MSC
mgoce:cell=cellname; //DELETES CELL FROM MSC
mgoci:cell=cellname ,cgi=404-53-,MSC=MSC name; //CREATES CELL IN MSC
mgocp:cell=cellname; //Display cell list in MSC

To check/change HR
RLDHP:CELL=CELLNAME; //To check HR status on that particular cell
RLDHC:CELL=CELLNAME,DTHAMR=?; //To change HR status on that particular cell

To check/enable DTX
RLCXP:CELL=ALL; // To check DTX on or not(DL)
RLCXC:CELL=CELL NAME, DTXD=ON; //To change DTX status(DL)
PARAMETER CHANGE
To check/change ACCMIN and RLT
RLSSP:CELL=ALL; //To check ACCMIN,CCHPWR,CRH, UPLINK DTX, RLT
RLSSC:CELL=CELL NAME,ACCMIN/RLINKT etc=?; //To change ACCMIN,CCHPWR,CRH,
UPLINK DTX, RLT

To check BA list

RLMFP:CELL=CELLNAME;
TA LIMIT(CHECK/CHANGE) & MEDIA FLICK

RLLUP:CELL=CELLNAME; //CHECK TA LIM OF CELL


RLLUC:CELL=CELLNAME, TALIM=?; //CHANGE TA LIM OF CELL

MEDIA FLICK

RXAPP:MO=RXOTG-TGNO.;
RADEP:DEV=DEVNAME;
NTCOP:SNT=ETM2-V;
DTQDP:DIP=DIP NAME;
EXTERNAL CELL CREATION

RLDEI:CELL=XXX,EXT,CSYSTYPE= GSM900;

RLDEC:CELL=XXX,CGI=XXX,BSIC=XXX,BCCHNO=XXX;

RLCPC:CELL=XXX,MSTXPWR=33;

RLLOC:CELL=XXX,BSRXSUFF=150,MSRXSUFF=0,SCHO=OFF,AW=OFF,
MSRXMIN=100,BSRXMIN=121,BSPWR=55,EXTPEN=OFF,BSTXPWR=55,MISSNM=3;

RLLHC:CELL=XXX,LAYER=2,LAYERTHR=75,LAYERHYST=2,PSSTEMP=0,PTIMTEMP=
0;
// RUN ALL THE FIVE COMMANDS FOR EXTERNAL CELL CREATION BEFORE HANDOVER
DEFINITION
NOKIA OSS
ZEEI:BTS=XXX; //SEE CELL STATUS
ZEOL:BCFNO; //CHECK ALARMS
ZEEI:BCFNO; // SHOWS STSTUS FOR COMPLETE SITE
ZEQO:BTS=XXX:ALL; //SEE ALL PARAMETERS
ZEAC:BTS=XXX::ABTS=XXX; //DEFINE HO SAME BSC

ZEAC:BTS=XXX::MCC=404,MNC=55,LAC=XXX,CI=XXX:NCC=2,BCC=5,FREQ=XX
X; //DEFINE HO DIFF BSC
ZEAD:BTS=XXX::LAC=XXX,CI=XXX ; // DELETE CELL
THANK YOU

SAMAHIL SETHI

You might also like