ALAMINOS CITY NATIONAL HIGH SCHOOL

SENIOR HIGH SCHOOL

DIAGNOSTIC TEST
COMPUTER SYSTEM SERVICES 1
1st Semester, S.Y. 2023-2024

NAME: ______________________________________________SCORE: ______________

I. Multiple Choice: ENCIRLCE the letter of your choice that best completes the
statement or answers the question. ERASURES WILL NOT BE COUNTED.
1. Which of the following materials were defective and needing replacements.
A. Damage B. Good C. Incomplete label D. Items accepted
2. What are the materials that are free from any deficiencies.
A. Good quality B. Low-cost C. Reliable D. Suitable
3. Your classmate ask you to scan and remove viruses from her computer, what software
utility you will use?
A. Anti-virus B. Check disk C. Defragmentation D. Disk clean up
4. Which of the following provides requirements, specifications, guidelines, or characteristics
that can be used consistently to ensure that materials, products, processes, and services are
fit for the purpose
A. Ergonomics B. Quality Standard C. Standard Operating Procedures D. Work Order
5. What happens when a liquid spill in your keyboard?
A. Nothing will happen, just continue typing.
B. Keyboard may not be fixable at this point.
C. Turn the keyboard upside down to drain for two days before reconnecting it.
D. It may cause malfunction to the keys and may cause short circuit.
6. Your teacher requires you a task to check your computer system unit. What is the most
important thing you should do?
A. List down possible solution to the problems
B. List down all the tools and materials needed.
C. Assess yourself if you have a prior knowledge related to the task.
D. Prepare the tools, materials, and equipment needed in accordance to given task
7. What is the first thing you will do if you spill a liquid on your keyboard?
A. Turn the keyboard upside down and allow the liquid to drain.
B. Quickly shut down the computer and disconnect the keyboard.
C. Moisten a cotton cloth or paper towel with rubbing alcohol and use it to clean the
tops of the keys.
D. Clean a desktop keyboard with compressed air or a small, handheld vacuum cleaner
with a brush attachment.
8. Which of the following does not lead to Static and awkward postures?
A. Decreased movement C. Increased stress and fatigue
B. Decreased circulation D. Decreased stress and fatigue
9. Which of the following software that controls application processing and hardware
resources of the computer system such as memory, disk space, and peripheral devices.
A. Application software B. Database software C. Software D. System Software
10. What is defined as a collection of raw and unprocessed facts?
A. Data B. Data Processing C. Information D. Software
11. Which of the following serves as home address of a web site/web page?
A. Link B. Search engine C. URL D. Web browser
12. When making arrangement with suppliers what is the basic reason?
A. Over supply of material C. Praise the supplier
B. Inventory of available material D. Return of defective material
13. Which of the following represents the purpose and type of domain or the geographical
area from which the web site originated?
A. Domain name B. Path C. Top-level domain D. URL
14. What step initially gathers and prepares data to be enter into a computer for processing?
A. Input B. Output C. Process D. Storage
15. If the hard disk is divided in multiple storage units, which process is being implemented?
A. dividing B. partitioning C. segregating D. separating
16. How would you identify to ensure the quality of electrical power and prevent the loss of
data during a power outage, which equipment will be used?
A. Power Supply Unit (PSU) C. Central Processing Unit (CPU)
B. Automatic Voltage Regulator (AVR) D. Uninterruptable Power Supply Unit (UPS)
17. Which of the following the ability to choose material according to different considerations?
A. Cost B. Environment C. Selection D. Testing
18. Samantha would like to perform calculation and it simulate paper worksheet by displaying
multiple cells that make up a grid that all members of her study group can access. They will
use it to different data. Which method would best accomplish Samantha’s goal?
A. Database software C. Spreadsheet software
B. Presentation software D. Word processing software
19. Which of the following is a type of Process Improvement
A. Reduce billing cycles C. Identify Solution
B. Defining the problem D. Analyze the situation
20. Which of the following is the effect of poor typing technique?
A. Carpal Tunnel Syndrome B. Fatigue C. Gain weight D. Stiffness
21. This is the operation of manipulating and transforming data into useful information. The
data are manipulated and changed in this step.
A. Input B. Output C. Processing D. Storage
22. As you see damage in the components of the computer you purchased, what will you do?
A. Repair the damage components of the computer you purchase.
B. Isolate the components from the other components in the package.
C. Ask for the replacement of the damage components and check the quality of it.
D. Report the damage components immediately to person concern and check the
quality performance of all other components.
23. It is a factor when choosing material based on its effect to pollution in soil, water, and air.
A. Cost of Material. C. Physical properties
B. Chemical properties D. Environmental consideration
24. What is the best way to bundle cables neatly inside and outside of a computer
A. Used cable ties C. Use steel wire
B. Rolled-out cables and wires D. Fixed the wire to the table
25. In using “DRIVE” as a tool for evaluating process and improvement, which of the following
is used to analyze the current situation and the problems that occur?
A. Define B. Identify C. Review D. Verify
26. What are the edges or "outlines" of an object?
A. Center Lines C. Visible lines
B. Dimension Lines D. Hidden Lines
27. You are assigned to perform a task in the workshop, which conforms your local safety
regulations and policies?
A. Use designated walkways as your resting area.
B. Use personal protective clothing and equipment (PPE)
C. Tools and equipment are scattered every working table.
D. Open cabinets at drawers during troubleshooting process.
28. What do you call the act of making joint on a process where two parts are joined?
A. JOINING B. JOITING C. JOLTING D. JOYNING
29. When a symbol is enlarged or reduced in size, what will you to make it suitable for use in
any diagram?
A. Drawn either vertically or horizontally.
B. Drawn smaller or larger than other symbols.
C. Not more than two different sizes of symbols
D. Drawn in proportion to the rest of the drawing.
30. Which of the following represented digitally?
A. A megabyte represents more than a million bytes.
B. A 10 Megapixel camera captures with high resolution output.
C. BDs have a storage capacity of 25 GB on a single-layer disc
D. A low-resolution picture from a digital camera will use around 360KB
31. What is the easily generated by friction on carpets, tile flooring, clothing, hair, fabric?
A. Electric Shock C. Static Force
B. Electrical Charge D. Static Electricity
32. Which of the following is NOT an environmental and safety health program?
A. The right tool be used for the job.
B. Tools be operated according to manufacturer’s instructions.
C. All tools be kept in good condition with regular maintenance.
C. Each tool be examined before use and damaged or defective tools may use.
33. They used to show surfaces, edges or corners of an object that are hidden from view?
A. Center Lines C. Hidden Lines
B. Dimension Lines D. Visible lines
34. How to prevent ESD damage to computer components using antistatic wrist strap?
A. Wrap the strap around your waist.
B. Attach the wire on the same side of the table.
C. Connect the cable to the metal chassis of the computer.
D. Never wear an antistatic wrist strap if you are repairing a power supply.
35. Which of the following is just an electronic circuit that has been shrunk to fit inside a chip?
A. Circuit Breaker B. Close Circuit C. Integrated Circuit D. Integrated Drive
36. What do you call the process on which metallic alloy used when melted to join metallic
surfaces?
A. De-soldering B. Metaling C. Soldering D. Welding
37. Which of the following are usually very small and complex devices and can be found in
thousands of products such as computers, cell phones, appliances, and medical equipment?
A. Capacitor B. Inductor C. Insulator D. Semiconductor
38. What do you call on the device use in performing work on a material or a physical system
using only hands?
A. Hand tool B. Mechanical tool C. Power tool D. Swiss tool
39. Which of the following is NOT recommended practices to be used in the application of
symbols to a circuit diagram?
A. It should not be drawn in proportion to the rest of the drawing.
B. The position of a symbol on a diagram does not affect its meaning.
C. The weight of a line used in drawing a symbol does not affect its meaning.
D. It is recommended that not more than two different sizes of symbols be used on any
one diagram.
40. What are the devices that read or write information on magnetic or optical storage media?
B. Input drives B. Peripheral drives C. Storage drives D. Storage peripherals
41. How will you make that for every job there is the right tool?
A. Always have a toolbox with different kind of tools and equipment.
B. Familiarize on the current task to have a tool for the job.
C. Always ready to use what is available tool for the current task.
D. Familiarize with the correct use of tool and the correct tool used for the current task.
42. What testing criteria that deals with the process during which a conforming product turns
into a defective product?
A. Controllability B. Interoperability C. Readiness D. Reliability
43. What will you do if a cable doesn't feel like it will go in inserting PCI pins?
A. Force anything and push harder.
B. If you are not sure which port is SATA1, refer to the motherboard manual.
C. Stop and make sure that the grooves and notches or pins and holes all match up.
D. Sightly angling them as you inset them to match the male and female connections.
44. Which is the reason for AC power fluctuations in your computer?
A. Computing resources usage. C. The files on your computer are very fragile
B. Data loss or hardware failure. D. Duplicating files/programs into computer
45. How would you identify the symbols used to represent various components on a circuit
diagram?
A. Combination of letters. C. Terminal (o) may be added to any symbol.
B. Combination of numbers. D. Not be considered a part of the symbol itself.
46. What should be done to install a storage drive in a computer?
A. An IDE interface uses a 40-pin connector.
B. SCSI is a drive controller interface that can connect to 15 drives.
C. There are different interfaces that are used to connect the drive to the computer.
D. The connection interface on the drive must be the same as the controller on the
motherboard.
47. Where do you place the terminator in a designed to match impedance and hence
minimize signal reflections?
A. Before the line of switch C. Start of a transmission line
B. End of a transmission line D. Start on the first symbol of the circuit
48. What is tools used to loosen or tighten slotted screw?
A. Hex driver C. Flat head screwdriver
B. Torx driver D. Phillips head screwdriver
49. Which of the following must be in your tool bag as a computer technician?
A. Set of Chisel C. Set of hammer
B. Set of Box Wrench D. Set of Screwdriver
50. What appropriate cleaning tools is essential when maintaining or repairing computer?
A. Alcohol B. Lint – free cloth C. Rugs D. Water