TESDA-OP-CO-05-F26

Rev. 00 – 03/01/17

TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY

Pangasiwaan sa Edukasyong Teknikal at Pagpapaunlad ng Kasanayan

 APPLICATION FORM
REFERENCE NUMBER :
Qual – YY Region Province Number Series Number Series
alpha
code Assigned to AC PICTURE
UNIQUE LEARNERS IDENTIFIER (ULI):
colored,
- - - -
passport size,
to be filled – out by the Processing Officer

white
background
Applicant’s Signature Date of Application

Name of School/Training Center/Company:

Address:
Title of Assessment applied for:
 Full Qualification  COC  Renewal
1. Client Type
 TVET Graduating Student  TVET graduate  Industry worker  K-12  OWF
2. Profile
2.1. Name:

 SURNAME

 FIRSTNAME 
 MIDDLE
 MIDDLE INITIAL
NAME EXTENSION
(e.g. Jr., Sr.)
NAME

Mailing
2.2.
Address:
Number, Street Barangay District

City Province Region Zip Code

2.3. Mother’s Name 2.4. Father’s Name
2.5. Sex 2.6. Civil Status 2.7. Contact Number(s) 2.8. Highest Educational 2.9. Employment Status
Attainment
 Male  Single Tel:  Elementary Graduate  Casual

 Female  Married Mobile:  High School Graduate  Job Order

 Widow/er E-mail:  TVET Graduate  Probationary

 Separated Fax:  College Level  Permanent

 College Graduate  Self - Employed

Others:
 Others: ____________  OFW
2.10 Birth date (mm/dd/yy): M M D D Y Y 2.11 Birth place: 2.12 Age:
3. Work Experience (National Qualification-related)
3.1. 3.2. 3.3. 3.4. 3.5. 3.6
Monthly No. of Yrs. Working
Name of Company Position Inclusive Dates Status of Appointment
Salary Exp.

(For more information, please use separate sheet)

4. Other Training/Seminars Attended (National Qualification-related)
4.1. 4.2. 4.3. 4.4 4.5
Title Venue Inclusive Dates No. of Hours Conducted By

(For more information, please use separate sheet)

5. Licensure Examination(s) Passed

5.1. 5.2. 5.3. 5.4. 5.5. 5.6.
Title Year Taken Examination Venue Rating Remarks Expiry Date

(For more information, please use separate sheet)

6. Competency Assessment(s) Passed

6.1. 6.2. 6.3 6.4. 6.5. 6.6.
Qualification
Title Level Industry Sector Certificate Number Date of Issuance Expiration Date

(For more information, , please use separate sheet)

ADMISSION SLIP

REFERENCE NUMBER :

Name of Applicant: Tel. Number: PICTURE

Assessment Applied for: Official Receipt Number:

(Passport
Date Issued: size)
To be accomplished by the Processing Officer
Name of Assessment Center:

Check submitted requirements: Remarks:

 Accomplished Self-Assessment  Bring own Personal Protective Equipment

Guide

 Three (3) pieces colored passport size pictures

 Others. Pls. specify

Assessment Date: Assessment Time:

Printed Name & Signature of Processing Officer Printed Name & Signature of Applicant

Date: Date:

Note: Please bring this Admission Slip on your assessment date.

 TESDA-OP-QSO-02-F07
Rev. No. 00 03/01/17

Reference No.

SELF-ASSESSMENT GUIDE

Qualification Title COMPUTER SYSTEMS SERVICING NC II

COC 1 Title INSTALL AND CONFIGURE COMPUTER SYSTEMS
Instruction: Read each question and check the appropriate box to indicate your
answer.
Can I? YES NO
 Plan and prepare unit for assembly*
 Identify and obtain materials necessary to complete the work and
check against system requirements
 Obtain tools, equipment and testing devices to carry out the work
and check for correct operation and safety
 Assemble following computer hardware according to established OH
& S policies and procedures and system requirements:
a. Motherboard and its components
b. Hard drives and its accessories
c. Power supply
d. Peripherals such as keyboard, mouse, cables
 Perform Basic Input Output System(BIOS) configuration based on
system requirements*
 Create portable bootable devices according to software
manufacturer’s instruction
 Prepare customized installers according to software utilization guide
and end-user agreement
 Install portable applications according to software user guide and
software license
 Install operating system according to established installation
procedure and end-user agreement
 Install and configure drivers of peripherals and devices according to
manufacturer’s instructions and OS installation procedures
 Access and install OS and drivers updates/patches based on
manufacturer’s recommendations and requirements*
 Check quality of work according to established procedures*
 Install application software based on installation guides, end-user
agreement and license agreement *
 Carry out variation in application software installation according to
manufacturer’s recommendations and requirements*
 Access and install software updates based on manufacturer’s
recommendations and requirements*
 Test devices/systems/installation to determine whether they conform
to requirements*
 Conduct stress test to ensure reliability of equipment*

1
ELCCSS 213-0119
COMPUTER SYSTEMS SERVICING NC II
 Follow 5S and 3Rs according to environmental policies
 Complete and forward the documentation to appropriate personnel
and/or authority*
I agree to undertake assessment in the knowledge that information gathered will used
only for professional development purposes and can only be accessed by concerned
assessment personnel and my manager/supervisor.

Candidate’s signature: Date:

NOTE: * Critical Aspects of Competency

2
ELCCSS 213-0119
COMPUTER SYSTEMS SERVICING NC II
 TESDA-OP-QSO-02-F07
Rev. No. 00 03/01/17

Reference No.

SELF-ASSESSMENT GUIDE

Qualification Title COMPUTER SYSTEMS SERVICING NC II

COC 2 Title SET UP COMPUTER NETWORKS
Instruction: Read each question and check the appropriate box to indicate your
answer.
Can I? YES NO
 Determine and plan cable routes according to network design *
 Identify and obtain network materials necessary to complete the work
according to established procedures and checks against system
requirements*
 Obtain tools, equipment and testing devices needed to carry out the
installation work in accordance with established procedures and
check for correct operation and safety*
 Use appropriate personal protective equipment and follows OH & S
policies and procedures
 Perform copper cable splicing in accordance with the standards such
as the 568A and 568B color coding cabling standards*
 Install network cables and cable raceway in accordance with
established procedures and installation requirements*
- slotted PVC
- metallic raceway
- flexible conduit
 Perform and check installation work to ensure compliance with
requirements*
 Follow 5S and 3Rs according to environmental policies
 Check network connectivity of each terminal in accordance with
network design*
 Diagnose and remedy network fault or problem in line with the
standard operating procedures
 Configure network interface card (NIC) settings in accordance with
network design*
- Configure IP address of all devices are configured
 Carry out communication checking between terminals in accordance
with OS network configuration guides*
- File sharing
- Access network resources
 Respond to unplanned events or conditions in accordance with
established procedures*
- Diagnose problems by retracing steps or localizing the trouble
area

3
ELCCSS 213-0119
COMPUTER SYSTEMS SERVICING NC II
 Set router/Wi-Fi/ wireless access point/repeater configuration*
- Configure and set router
 Configure client device systems settings in accordance with
manufacturer’s instructions, end-user preference and network
design*
 Configure Client computer wi-fi access
 Configure local area network (LAN) port*
 Configure wide area network (WAN) port*
 Configure wireless settings*
 Configure security/firewall/advance settings*
 Undertake final inspection to ensure that the configuration conforms
with the manufacturer’s instructions/manual*
 Check computer networks to ensure safe operation*
 Prepare/complete reports according to company requirements*
I agree to undertake assessment in the knowledge that information gathered will used
only for professional development purposes and can only be accessed by concerned
assessment personnel and my manager/supervisor.

Candidate’s signature: Date:

NOTE: * Critical Aspects of Competency

4
ELCCSS 213-0119
COMPUTER SYSTEMS SERVICING NC II
 TESDA-OP-QSO-02-F07
Rev. No. 00 03/01/17

Reference No.

SELF-ASSESSMENT GUIDE

Qualification Title COMPUTER SYSTEMS SERVICING NC II

COC 3 Title SET UP COMPUTER SERVERS
Instruction: Read each question and check the appropriate box to indicate your
answer.
Can I? YES NO
 Create user folder in accordance with network operating system
features*
 Configure user access level based on NOS features and established
network access policies and end-user requirements*
 Perform security check in accordance with established network
access policies/end-user requirements*
 Check normal functions of server in accordance with manufacturer’s
instructions*
 Install/update required modules/add-ons based on NOS installation
procedures*
 Confirm network services to be configured based on user/system
requirements*
 Check operation of network services based on user/system
requirements*
 Respond to unplanned events or conditions in accordance with
established procedure*
 Perform testing of network through file and printer sharing,
documentation and pre-deployment procedures*
 Undertake pre-deployment procedures based on enterprise policies
and procedures*
 Undertake operation and security check based on end-user
requirements*
 Prepare and complete reports according to enterprise policies and
requirements*
I agree to undertake assessment in the knowledge that information gathered will used
only for professional development purposes and can only be accessed by concerned
assessment personnel and my manager/supervisor.

Candidate’s signature: Date:

NOTE: * Critical Aspects of Competency

5
ELCCSS 213-0119
COMPUTER SYSTEMS SERVICING NC II
 TESDA-OP-QSO-02-F07
Rev. No. 00 03/01/17

Reference No.

SELF-ASSESSMENT GUIDE

Qualification Title COMPUTER SYSTEMS SERVICING NC II

MAINTAIN AND REPAIR COMPUTER SYSTEMS AND
COC 4 Title
NETWORKS
Instruction: Read each question and check the appropriate box to indicate your
answer.

Can I? YES NO
 Plan and prepare maintenance and/or diagnosis of faults in line with
job requirements*
 Obtain and check tools, equipment and testing devices for correct
operation and safety
- Hardware tools
- Software tools
 Obtain and check materials necessary to complete the work in
accordance with established procedures and checks against job
requirements
 Follow OHS policies and procedures
 Check computer systems and networks for maintenance against
job/service order instructions and specifications*
 Use appropriate personal protective equipment in line with standard
procedures
 Check normal function of computer systems and networks based on
manufacturer’s instructions
 Perform scheduled/periodic maintenance in accordance with
manufacturer’s requirements
 Perform necessary repairs/replacements in accordance with
established procedures
 Respond to unplanned events or conditions in accordance with
established procedures
 Diagnose faults or problems in the computer systems and networks
according to requirements and in line with the standard procedures*
 Manage and implement contingency measures in accordance with
established procedures
 Replace or correct defective components or parts without damage to
the surrounding environment or services*
 Make adjustments, if necessary in accordance with established
procedures*

6
ELCCSS 213-0119
COMPUTER SYSTEMS SERVICING NC II
 Clean and clear work site of all debris to ensure safety in
accordance with company procedures
 Follow 5S and 4Rs according to environmental policies
 Undertake final inspections to ensure that the testing conducted on
the device conforms with the manufacturer’s instructions/manual*
 Check and test computer systems and networks to ensure safe
operation*
 Prepare and complete reports according to company requirements*
I agree to undertake assessment in the knowledge that information gathered will used
only for professional development purposes and can only be accessed by concerned
assessment personnel and my manager/supervisor.

Candidate’s signature: Date:

NOTE: * Critical Aspects of Competency

7
ELCCSS 213-0119
COMPUTER SYSTEMS SERVICING NC II