T. L. E.

9
COMPUTER SYSTEMS
SERVICING

Technology and Livelihood Education – CSS – Grade 9

Quarter 3 – Module 7: Proper Storing of hand tools/instruments First Edition,
2020
Republic Act 8293, Section 176 states that no copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary for
exploitation of such work for profit. Such agency or office may, among other things,
impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright
holders. Every effort has been exerted to locate and seek permission to use these
materials from their respective copyright owners. The publisher and authors do
not represent nor claim ownership over them.
Published by the Department of Education - Schools Division of Pasig City
Development Team of the Self-Learning Module
Writer: Vernette R. Ortiz
Editors: Maria O. Del Barrio, Jhoanna V. Navata
Reviewers: Maria O. Del Barrio, Jhoanna V. Navata
Illustrator:
Layout Artist:
Management Team: Ma. Evalou Concepcion A. Agustin
OIC-Schools Division Superintendent
Manuel Laguerta EdD
Chief, Curriculum Implementation Division
Victor M. Javeña EdD
Chief, School Governance and Operations Division
Education Program Supervisors
Librada L. Agon EdD (EPP/TLE/TVL/TVE)
Liza A. Alvarez (Science/STEM/SSP)
Bernard R. Balitao (AP/HUMSS)
Joselito E. Calios (English/SPFL/GAS)
Norlyn D. Conde EdD (MAPEH/SPA/SPS/HOPE/A&D/Sports)
Wilma Q. Del Rosario (LRMS/ADM)
Ma. Teresita E. Herrera EdD (Filipino/GAS/Piling Larang)
Perlita M. Ignacio PhD (EsP)
Dulce O. Santos PhD (Kindergarten/MTB-MLE)
Teresita P. Tagulao EdD (Mathematics/ABM)

Printed in the Philippines by Department of Education – Schools Division of Pasig

City
T. L. E. 9

Quarter 3
Self-Learning Module 7
Proper Storing of hand
tools/instruments

Introductory Message
For the Facilitator:
Welcome to the (Technology and Livelihood Education Grade 9) Self-Learning
Module on (Proper Storing of hand tools/instruments)!
This Self-Learning Module was collaboratively designed, developed and reviewed by
educators from the Schools Division Office of Pasig City headed by its
Officer-in-Charge Schools Division Superintendent, Ma. Evalou Concepcion A.
Agustin, in partnership with the City Government of Pasig through its mayor,
Honorable Victor Ma. Regis N. Sotto. The writers utilized the standards set by the K
to 12 Curriculum using the Most Essential Learning Competencies (MELC) in
developing this instructional resource.
This learning material hopes to engage the learners in guided and independent
learning activities at their own pace and time. Further, this also aims to help
learners acquire the needed 21st century skills especially the 5 Cs, namely:
Communication, Collaboration, Creativity, Critical Thinking, and Character while
taking into consideration their needs and circumstances.
In addition to the material in the main text, you will also see this box in the body
of the module:

Notes to the Teacher

This contains helpful tips or strategies that
will help you in guiding the learners.

As a facilitator you are expected to orient the learners on how to use this module.
You also need to keep track of the learners' progress while allowing them to
manage their own learning. Moreover, you are expected to encourage and assist the
learners as they do the tasks included in the module.

For the Learner:

Welcome to the (Technology and Livelihood Education Grade 9) Self-Learning
Module on (Proper Storing of hand tools/instruments)!
This module was designed to provide you with fun and meaningful opportunities
for guided and independent learning at your own pace and time. You will be
enabled to process the contents of the learning material while being an active
learner.
This module has the following parts and corresponding icons:
 Expectations - This points to the set of knowledge and skills
that you will learn after completing the module.

Pretest - This measures your prior knowledge about the lesson

at hand.

Recap - This part of the module provides a review of concepts

and skills that you already know about a previous lesson.

Lesson - This section discusses the topic in the module.

Activities - This is a set of activities that you need to perform.

Wrap-Up - This section summarizes the concepts and
application of the lesson.

Valuing - This part integrates a desirable moral value in the

lesson.

Posttest - This measures how much you have learned from the
entire module.

EXPECTATIONS
At the end of the lesson, the students should be able to:
A. define storage;
B. discuss the ways on how to store the hand and power tools properly;
C. appreciate the importance of knowing how to keep the hand and power tools in
good condition.
 PRETEST
Directions: Write True if the statement is correct and False if it is wrong. Write
your answer on the space provided.
___________ 1. Hanging pegboards on the walls of the work room is a handy way to
keep tools stored at home.
___________ 2. Don’t keep measuring instruments stored in a place as far away as
possible from vibration and movement.
___________ 3. Precision measuring tools should never be put near any magnetic
material such as magnetic worktable, to avoid being magnetized.
___________ 4. A power tool storage rack is a smart solution for keeping the power
tools organized especially if the problem is space.
___________ 5. Store tools in a humid or wet place.

RECAP
Do you still remember our previous lesson about Faulty or unsafe hand tools?
Let’s find out.
Directions. Identify the following questions. Write your answer on the space
provided.
_______________ 1. These are used to link wires in such a way that they are capable
of transmitting data.
_______________ 2. These are used to for installation and dismantle of delicate parts
as bearing.
_______________ 3. These are used to fasten bolts and nuts of different sizes.
_______________ 4. They are particularly useful in hardware and electronics repair;
because of their pointed needle-like tip.

_______________ 5. These are pliers that help strip the wire off its insulation.
 LESSON
Proper Storing of Hand Tools and Instruments

From small hand tools such as screwdrivers or

wrenches to large power tools commonly found in
workshops or tool shops, most individuals have
various types of tools at home. Tools from the
basement to the garage are kept all over the house,
but if not stored properly, they will rust and break.
For care and storage, hand and power devices have
different specifications.
What is Storage?
Storage is the process of keeping or putting
something in a special place while it is not being
used. Proper storage is an important factor to
consider for the safety and health of the workers.

There are different ways of storing tools and equipment. Some prefer to store tools
in the basement or in garage while some store tools in the cabinets.
The following are the different storage and how it is being used:
1. Power Tool Storage Rack
A power tool storage rack is a smart solution for keeping your
power tools organized especially if the problem is space. The
power tools is accompanied by a power tool storage rack for
protection.
https://www.amazon.com/Organizers-Cabinets-Charging-Circular
Screwdriver/dp/B07TS7DLL8

2. Power Tool Storage Cabinet

It is the best solution for storing power tools and other hand
tools keeping it safe, clean and organized. Some storage
cabinets for power tools come with the capacity to charge.
https://www.amazon.com/Organizers-Cabinets-Charging-Circular
Screwdriver/dp/B07TS7DLL8

3. Hanging Tools or Use Tool Storage Drawers

Hanging pegboards on the walls of the work room,
in the garage or basement, is a handy way to keep
tools stored at home. It will keep instruments off
the floor and organized. Use a drawer storage
system for smaller tools and accessories to protect
them from dust.
https://sebringdesignbuild.com/31-tool-storage-ideas/

4. Measuring devices come in cases

Most of the measuring devices come in cases, and in
these cases it is the best practice to store the tools.
The cases also helps protect tools from dust and
airborne contaminants and prevent accidental
physical damage by holding them in a case.
https://sebringdesignbuild.com/31-tool-storage-ideas/

Useful Tips in Storing Instruments

1. Make sure the location is well-protected from disruptive factors. 2. Do not store
precision instruments where they can bump against each other in the drawer. Use
dividers to isolate instruments from each other or position them in padded cases.
Unless they are well-protected in situations, avoid stacking instruments on top of
each other.
3. Keep measuring instruments stored in a place as far away as possible from
vibration and movement. If the storage location is exposed to humidity, use
methods of moisture reduction that can help minimize humidity. Silica gel packets
stored in drawers or kept air-conditioned in a storage room can also significantly
reduce ambient moisture.
4. Always store tools in a dry place. Never leave them outdoors.
5. Precision measuring tools should never be put near any magnetic material such
as a magnetic worktable, to avoid being magnetized.

Below are some simple preparatory steps that should be taken into consideration
inorder to keep tools in good working condition during storage.

1. Clean tools after each use.

After each use, clean them to keep the instruments tidy. To ensure that they are
free of dirt, grease and debris, wipe them down with a rag or towel. Clean every
metal surface with an approved solution and scrape away any soil and dirt if the
instruments need extra care. Before it is placed in storage, completely dry the tool
with a towel or rag. All surfaces should be cleaned and completely dry before
power tools are used.
2. Dispose any broken or defective tools.
Check for damage or flaws as you do your cleaning. If you can't repair a tool, then
throw it away. Do not allow the extra space to be cluttered.
3. Use metal protectant spray on all metal parts.
With a lubricant metal protector spray, coat the metal parts of the instruments.
4. Never store tools near the ground.
Do not put the tools on the ground directly for storage. Set the small hand and
power tools on the shelving.
5. Be creative with storage options.
Store equipment with short handles in a plastic bin or box. Lock long-handled
instruments together in a garbage can when in storage. If not, hang these
instruments on a wall. Place small tools in plastic bins if you are storing tools in
self-storage. In a bin, organize similar-sized instruments together. An additional
layer of security is provided by plastic bins. Also, the bins are easy to stack and
bring to a construction site from the storage unit to a vehicle.
6. Make a list of all items that are stored.
Be sure to mark the contents of the boxes so that you can locate the tool when you
need it. Keep a list of the equipment that you have and where they are kept for
inventory.
 ACTIVITIES
Directions. Enumerate what is being asked.
1. What are ways on how to store your hand and power tools? Write your answer
on the spaces provided.
__________________________________________________________________________________
__________________________________________________________________________________

__________________________________________________________________________________
__________________________________________________________________________________

__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
2. What is your idea of “Storage”? Why it is important to keep your tools in good
working condition during storage?
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________

WRAP-UP
Directions. In the graphic organizer below, write down your learnings in Module 7:
Proper Storing of hand tools/instruments
Module 7: Proper Storing
of hand
tools/instruments

VALUING
Directions. Kindly share the values you’ve learned by completing the statement
below. Write down your insights on the spaces provided.
_____________________________________
Proper
_______
Storing of
_____________________________________
hand tools/
_______
∙ I have realize that
instruments _____________________________________
∙ I have learned that ___________

POSTTEST
Directions. Write True if the underlined word is correct, if it is False change the
underlined word to make the statement correct.
_____________1. Put the tools on the ground directly for storage.
_____________ 2. Check for damage or flaws as you do your cleaning.
_____________ 3. A power tool storage rack is a smart solution for keeping your
power tools organized if you are in a crunch for space.
_____________ 4. Make sure the location is unprotected from disruptive factors if
you put an instrument in its storage location.
_____________ 5. Keep measuring instruments stored in a place as far away as
possible from vibration and movement if your work is in a setting where vibration is
an issue.

KEY TO
CORRECTION
 True 5.
your projects and jobs much easier.
Well protected 4.
True 3.
True 2.
Do not 1.
Posttest
False 5.
True 4.
True 3.
False 2.
True 1.
Pretest
Wire strippers 5.
Needle nose pliers 4.
Nut driver 3.
Sledge hammer 2.
crimpers
Crimping tools or 1.
Recap
and well maintained, and make
tools are properly stored, washed
time and money to ensure that your
good care of them. It will save you
and return the favor if you take
t longer investment, but they'll las
Good quality tools may be a major
health of the workers.
factor to consider for the safety and
Proper storage is an important
. place while it is not being used
something in a special putting
process of keeping or Storage is the
Activity 2
Appropriate Environment
Store Instruments in an 5.
cases
Measuring devices come in 4.
Storage Drawers
Hang Tools or Use Tool 3.
Power Tool Storage Cabinet 2.
Power Tool Storage Rack 1.
Activity 1
References

“Cisco Press,” March 12, 2012. https://www.ciscopress.com/articles/article.asp?p=2086239.

Guy, R. (2020, July 27). For An Effective Flat Head Screwdriver Use, Follow 3 Tips.
Retrieved January 14, 2021, from https://repairinggear.com/3-tips-to-use-the-flat-head
screwdriver/#Proper_Use_of_the_Flat_Head_Screwdriver