Scribd
Upload
98 views

CARPENTRY NC II-common Competency Module 4

The document provides information about maintaining tools and equipment for carpentry. It discusses identifying functional and non-functional tools, performing basic preventive maintenance, and safely storing tools. The three sessions covered are: 1) checking tools and equipment for condition, 2) performing maintenance like cleaning and lubrication, and 3) inventorying and storing tools in designated areas. The objective is for participants to safely handle, maintain, and store tools according to proper procedures.

Uploaded by

Regena Gulada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
98 views

CARPENTRY NC II-common Competency Module 4

The document provides information about maintaining tools and equipment for carpentry. It discusses identifying functional and non-functional tools, performing basic preventive maintenance, and safely storing tools. The three sessions covered are: 1) checking tools and equipment for condition, 2) performing maintenance like cleaning and lubrication, and 3) inventorying and storing tools in designated areas. The objective is for participants to safely handle, maintain, and store tools according to proper procedures.

Uploaded by

Regena Gulada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 21

CONSTRUCTION CIVIL WORKS

CARPENTRY-NC II
COMMON COMPETENCY
MODULE 4

MAINTAINING TOOLS AND


EQUIPMENTS
OBJECTIVE:
Upon completion of this module, the participants will be able to:
1.Identified functional and non-functional tools and equipment
2.Observed and applied safe handling of tools and equipment and safety work
practices
3.Store tools and equipment safety in appropriate locations and in accordance
with company practices

DURATION: 3 hours

SESSIONS:
1.Check condition of tools and equipment
2.Perform basic preventive maintenance
3.Store tools and equipment
1. Materials ,tools and equipment are identified according to
classification and Job Requirement

2. Non- functional tools and equipment are segregated and labeled


according to Classification

3. Safety of tools and equipment are observed in accordance with


manufacture’ Instruction

4. Condition of PPE Are Checked in accordance with


manufacture’s instructions
SESSION 1: CHECK
CONDITION OF
TOOLS AND
EQUIPMENT
TOOLS AS MAN’S PARTNER
Tools had been regarded as
a partner of man’s quest for
progress and survival from
the early Stone Age down to
the present generation. the
mechanical advantages,
accuracy ,speed and efficiency
derived from the use of the
right tools and equipment ,
encouraged man to
continuously search for the
refinement of old tools aside
from the efficiency and
refinement of work.
TYPES OF TOOLS AND EQUIPMENT

• Cutting tools
• Hacksaw
• Crosscut saw
• Rip saw
• Boring tools
• Auger
TOOLS AND EQUIPMENT
• Brace
• Gin let
• Hand drill
• Vise grip
• C-clamp
• Bench vice
• Treading tools
• Die and stock
• Taps
PERSONAL PROTECTIVE EQUIPMENT

safety shoes Hard Hat or Safety Helmet

CHEMICAL CARTRIDGE
DEVICES remove contaminants
Leather gloves by passing the tainted air
shield your hands through material that traps the
from rough harmful portions. There are
surfaces and heat specific cartridges for specific
contaminants.
CHECK CONDITION OF TOOLS AND EQUIPMENT
CLASSIFICATION OF FUNCTIONAL /NON FUNCTIONNAL

CHART OF FUNTIONAL AND NON- FUNTIONAL TOOLS

CLASSIFICATION FUNCTIONAL NONFUNCITIONAL REMARKS

SPRING NOT
PULL PUSH RULE CONDEMNED
FUNCTION

TOOTH CUTTING GOOD CONDITION

CONDEMNED
POINTING TROWEL BROKEN HANDLE

MASONRY CHISEL DULL SHARPEN


CONDITIONS /RESOURCES

1. Appropriate lubricants are identified


according to types of equipment

2.Tools and equipment are lubricated according


to preventive maintenance and schedule or
manufacturer’s specifications
SESSION 2: PERFORM BASIC
PREVENTIVE
MAINTENANCE
PERFORM BASIC PREVENTIVE
MAINTENANCE

Tools last longer


when they handle
with proper
preventive maintenace
techniques and
procedures
Measuring instrument are checked and
calibrated in accordance with Manufacturer’s
Instructions
Tools are cleaned and lubricated according to standard
procedures.
After using tools ,clean them thoroughly with a clamp cloth before
keeping in the tools cabinet.
MODULE : Maintain Tools and Equipment

Conditions/ resources

PERFORMANCE CRITERIA:

1. Inventory of tools, instruments and equipment are


conducted and recorded as per company practices.

2. Tools and equipment are stored safety in appropriate locations


in accordance with Manufacturer’s specifications or company
procedures.
SESSION 3: STORE TOOLS
AND EQUIPMENT
• Secure inventory form / memorandume receipt of toolsand equipment
• Study the parts of the inventory form
• Check whether the list tools and equipment in the memorandum reciepts
tallies whith the tools and equipment found in the workshop including
specification and condition
• List down any loss and damage found during inventory
form for any loss / damage

• Fill out remarks column of the inventory form for any


loss and damage

• Recommend for replacement of lost tools and equipment


and repair of damaged tools and equipment if reapairable
SAMPLE INVENTORY FORM OF TOOLS
AND EQUIPMENT
ITEM NO. QUANTITY UNIT DESCRIPTION CONDITION REMARKS
THANK YOU
FOR
LISTENING!!!

You might also like