ExpressPCB, LLC

EXPRESSPCB®
END USER LICENSE AGREEMENT FOR EXPRESSPCB® SOFTWARE PRODUCTS

This ExpressPCB, LLC EXPRESSPCB® End User License Agreement accompanies EXPRESSPCB® software
products and related explanatory materials ("Software"). The term "Software" also shall include any upgrades,
modified versions or updates of the Software licensed to you by EXPRESSPCB®. Please read this Agreement
carefully. At the end, you will be asked to accept this agreement and continue to install or, if you do not wish to accept
this Agreement, to decline this agreement, in which case you will not be able to use the Software.

Upon your acceptance of this Agreement, ExpressPCB, LLC grants to you a nonexclusive license to use the
Software, provided that you agree to the following:

1. Use of the Software. You may install the Software on a hard disk or other storage device; install and use the
Software on a file server for use on a network for the purposes of (i) permanent installation onto hard disks or other
storage devices or (ii) use of the Software over such network; and make backup copies of the Software.

EXPRESSPCB® Software is for use to design Printed Circuit Boards (PCB's). The proprietary file formats generated
by this software can only be used by EXPRESSPCB®. The schematic and design layout data submitted for
manufacturing or converted to open file formats by EXPRESSPCB® remain the intellectual property of the User. Data
converted by EXPRESSPCB® services from proprietary file formats to open file formats have no restrictions.

This Agreement does not allow you to use EXPRESSPCB® proprietary file formats with non-authorized PCB
manufacturers or to convert proprietary file formats to open file formats through any other methods other than
EXPRESSPCB® services.

When submitting manufacturing information to EXPRESSPCB® you are stating that you have full rights and title to
the schematic and layout being submitted for manufacturing.

You may make and distribute unlimited copies of the Software as long as each copy that you make and distribute
contains this Agreement, the same copyright and other proprietary notices pertaining to this Software that appear in
the Software, and that the purpose of distributing the software is for the purpose of designing PCB's and, if PCB's are
manufactured, that the manufacturing information and/or product is produced by EXPRESSPCB®. If you download
an updated version of the Software from the Internet or similar on-line source, you must include the EXPRESSPCB®
copyright notice for the Software with any on-line distribution and on any media you distribute that includes the
Software.

2. Copyright and Trademark Rights. ExpressPCB, LLC and its suppliers own the Software, and its structure,
organization and code are valuable trade secrets of ExpressPCB, LLC and its suppliers. United States Copyright Law
and International Treaty provisions also protect the Software. You may use trademarks only insofar as required to
comply with Section 1 of this Agreement and to identify printed output produced by the Software, in accordance with
accepted trademark practice, including identification of trademark owner's name.

Such use of any trademark does not give you any rights of ownership in that trademark. Except as stated above, this
Agreement does not grant you any intellectual property rights in the Software.

3. Restrictions. You agree not to modify, adapt, translate, reverse engineer, decompile, disassemble or otherwise
attempt to discover the source code of the Software. The Software is licensed and distributed by EXPRESSPCB, LLC
for designing, viewing, and transferring data associated PCB designs to EXPRESSPCB®.

4. No Warranty. The Software is being delivered to you AS IS and EXPRESSPCB® makes no warranty as to its use
or performance. EXPRESSPCB, LLC AND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE
PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION.
EXPRESSPCB, LLC AND ITS SUPPLIERS MAKE NO WARRANTIES, EXPRESS OR IMPLIED, AS TO
NONINFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR
PURPOSE. IN NO EVENT WILL EXPRESSPCB, LLC, EXPRESSPCB® OR ITS SUPPLIERS BE LIABLE TO YOU
FOR ANY CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST
SAVINGS, EVEN IF A EXPRESSPCB, LLC REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY. Some states or jurisdictions do not allow the
exclusion or limitation of incidental, consequential or special damages, or the exclusion of implied warranties or
limitations on how long an implied warranty may last, so the above limitations may not apply to you.
5. Governing Law and General Provisions. This Agreement will be governed by the laws of the State of Oregon,
U.S.A., excluding the application of its conflicts of law rules. This Agreement will not be governed by the United
Nations Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded.
If any part of this Agreement is found void and unenforceable, it will not affect the validity of the balance of the
Agreement, which shall remain valid and enforceable according to its terms. You agree that the Software will not be
shipped, transferred or exported into any country or used in any manner prohibited by the United States Export
Administration Act or any other export laws, restrictions or regulations. This Agreement shall automatically terminate
upon failure by you to comply with its terms. This Agreement may only be modified in writing signed by an authorized
officer of ExpressPCB, LLC.

6. ExpressPCB, LLC has no control over, or knowledge of, your particular use of its printed circuit boards and other
products. ExpressPCB, LLC products may be subject to the International Trade in Arms Regulations ("ITAR"),
administered by the U.S. Department of State. By ordering or purchasing products from ExpressPCB, LLC, you agree
to comply with ExpressPCB, LLC’s privacy policy, and all applicable U.S. export control laws and regulations,
including without limitation ITAR. Without limiting the foregoing, you agree that you will not transfer any export-
controlled item to any foreign persons without the authority of an export license, agreement, or applicable exemption
or exception, from proper government authorities. If you are engaged in the business of either exporting or
manufacturing defense articles or furnishing defense services, you represent and warrant to ExpressPCB, LLC that
you are registered with the proper government authorities in accordance with ITAR and other applicable laws. You
will be liable for all liabilities and expenses associated with your compliance and non-compliance with this paragraph,
and you agree to indemnify ExpressPCB, LLC from all costs and expenses associated with third party claims arising
out of your non-compliance.

Unpublished-rights reserved under the copyright laws of the United States.

YOUR ACCEPTANCE OF THE FOREGOING AGREEMENT WAS INDICATED DURING INSTALLATION.