Quarter 2: 1st Summative Test

Dipolog City Division

SY 2020-2021

TLE- ICT-CSS 10

Name:  __________________________________  Score:__________

Section: _________________________________ Date: ___________

Directions:  Read each question carefully and encircle the letter of correct
answer from the given choices.

1. Which of the following does not practice safety precautions?

a. No one should know that you will be working in your area
b. Cordon off the area with caution tape or safety cones.
c. Keep your working tools in safe place.
d. Make sure that fire extinguisher and first aid kit be available in a
workplace.
2. What type of cables are the Coaxial, twisted pair and fiber optic?
a. Communication cable
b. Network cable
c. LAN cable
d. Transport cable
3. Why do we need to network computer?
a. To share resources and data between computer systems
b. To allow communication from one computer to another
c. Allows application to shared
d. All of the above
4. From the option below, which type of cable is used for telephone
communications and Ethernet networks?
a. coaxial cable
b. twisted pair
c. fiber optic cable
d. multimode cable
5. What is the difference between twisted pair and fiber optics?
a. Twisted pair is used for telephone communication while fiber optics is
used for cable television
b. Twisted pair is made up of copper and fiber optics is made up glass
c. Twisted pair is surrounded by heavy shielding and is enclosed in a sheath
or jacket.
d. Twisted pair is wrapped in metallic foil while fiber optic is surrounded by
heavy shielding
6. What type of cable has a thicker core than single-mode cable?
a. multimode
b. single-mode
 c. twisted pair
d. untwisted pair
7. What is the major factor that makes coaxial less susceptible to noise than
twisted-pair cable?
a. Inner conductor
b. Insulating material
c. Diameter of cable
d. Outer conductor
8. What type of cable that has two or four pairs of wires?
a. coaxial
b. unshielded twisted pair/UTP
c. shielded twisted pair/STP
d. fiber optic
9. What type of UTP cable in which wiring is used for telephone systems and
Ethernet LAN?
a. Cat5
b. Cat5e
c. Cat3
d. Cat6
10. Which of the following where each of wire is wrapped in metallic foil to better
shield the wires from noise.
a. coaxial
b. fiber optic
c. UTP
d. STP
11. What type of cable which is made of glass or plastic conductor that transmit
information using light?
a. fiber optic
b. coaxial
c. twisted pair
d. shielded twisted pair
12. What type of coaxial cable with more than bandwidth and less susceptibility to
interference?
a. thicknet
b. thinnet
c. RG-6
d. RG-59
13. Which type of cable that has a very thin core?
a. multimode
b. single-mode
c. RG-59
d. RG-6
14. Which of the following is NOT a function of protocols?
a. Identifying errors
b. Compressing the data
c. Addressing the data
 d. Cabling
15. What is known as the dominant standard for internetworking?
a. IPX/SPX
b. TCP/IP
c. HTTP
d. FTP
 Quarter 2: 2nd Summative Test
Dipolog City Division
SY 2020-2021

TLE- ICT-CSS 10

Name:  __________________________________  Score:__________

Section: _________________________________ Date: ___________

Directions:  Read each question carefully and encircle the letter of correct
answer from the given choices.

1. Which of the following is correct regarding Class B Address of IP address?

a. Network bit-14,Host bit-16 c. Network bit-18,Host bit-16
b. Network bit-16,Host bit-14 d. Network bit-12,Host bit-14
2. What is the use of Bridge in Network?
a. To connect LANS c. to control Network Speed
b. to separate LANS d. All of the above
3. Which of the following enables you to test sound and graphics output?
a. Ipconfig c. msconfig
b. regedit d. dxdiag
4. When does network congestion occurs?
a. In case of traffic overloading
b. When sysytems Terminates
c. When connection between two nodes 2 terminates
d. None of the mentioned
5. Which of the following applets does not belong to Performance and maintenance
category?
a. Administrative tool c. Power Options
b. Automatic Updates d. System
6. Which of the following wizard is used to configure windows for vision, hearing and
mobility needs?
a. Accessibility Option c. Sounds, speech and audio
b. Security Center d. User Accounts
7. What is the benefit of Computer Networking?.
a. File Sharing c. Easier Backups
b. Easier access to resources d. All of the above
8. Which of the following is the most commonly used networking cable category?
a. Cat3 c. Cat 5 and 5e
b. Cat 5 d. Cat 6
9. What does ADSL stands for?
 a. Asymmetric Dual Subscriber Line
b. Asymmetric Digital System Line
c. Asymmetric Dual System Line
d. Asymmetric Digital Subscriber Line
10. What Ethernet cable is used to connect two devices directly?
a. Cross-Over c. both A and B
b. Straight-through d. None of the options
11. Which of the following is a number used to identify a device on a network?
a. Default gateway c. IP address
b. DNS Server d. subnet mask
12. In which of the following IP address does 192.168.1.105 belong?
a. Class A c. Class C e. Class E
b. Class B d. Class D
13. What command is used to test the ability of the source computer to reach a
specified destination computer?
a. Ipconfig c. Ping
b. Msconfig d. Regedit
14. Bridge works in which layer of the OSI model?
a. Application layer c. Network layer
b. Transport layer d. Datalink layer
15. Which data communication method is used to transmit the data over a serial
communication link?

a. Simplex c. Full duplex

b. Half-duplex d. all of the above
 Quarter 2: 3rd Summative Test
Dipolog City Division
SY 2020-2021

TLE- ICT-CSS 10

Name:  __________________________________  Score:__________

Section: _________________________________ Date: ___________

Directions:  Read each question carefully and encircle the letter of correct
answer from the given choices.

1. What is the most important software that runs on a computer?

a. Utility Software
b. Operating System
c. Anti-Virus
d. Device Driver

2. Which type of software that works behind the scene and without user intervention
and in most situations perform other tasks?
a. System Software
b. Application Software
c. Utility Software
d. Programming Software

3. What would NOT happen when the Set Up Windows asks for a Product key and
chose to skip it by clicking Next?
a. Windows will proceed to Windows Updates Set Up.
b. Windows will run for only 30 days as a trial version.
c. Windows will ask for product key later.
d. Windows will generate its own product key.

4. Which button will you click if you wanted to create an additional partition during
the installation?
a. Next
b. Format
c. Drive options (advanced)
d. Load Driver
5. What is the difference between a clean installation and an upgrade?
a. A clean install includes applications and settings from previous
installations.
b. An upgrade includes applications and settings from previous installations.
c. A clean installation starts by formatting the hard drive.
d. There is no difference, they are the same.

6. Why do you need to accept the terms and conditions set by the software to install
it?
a. So that you can get away with criminal liabilities.
b. So that you can learn how the device works.
c. So that the company can ask for money.
d. So that you can proceed with the installation

7. Which of the following is not a computer peripheral?

a. Mouse
b. Device Driver
c. Keyboard
d. Printer

8. They are known as the physical, touchable, electronic and mechanical parts of
the computer.
a. Software
b. Hardware
c. Mouse
d. Printer

9. If it is your first time to unbox a printer, what would you do best to ensure its
proper installation?
a. Read the user manual
b. Experiment and discover by your own.
c. Listen to anyone’s advice.
d. Don’t touch the printer at all.

10. What type of error that might occur when drivers are not updated and may cause
your PC not to work properly?
a. Green Screen
b. Red Screen
c. Blue Screen
d. Yellow Screen
11. What is known as the physical, touchable, electronic, and mechanical parts of the
computer?
a. Software
b. Hardware
c. Mouse
d. Printer

12. What term is referred to as the ability of common devices such as mouse and
keyboard wherein once they get connected to the computer they are
automatically installed and can be used right away?
a. Pull & Plug
b. Plug & Load
c. Plug & Play
d. Pull & Play

13. From the selection of Software Installation, what could be the reason why we
would choose the option Re-install the essential software?
a. Install a different device
b. re-install software and change the Printer’s connection settings
c. install additional printing and scanning applications.
d. Re-install the scanner application only.

14. Upon connecting your printer to your PC which of the following is not an
essential step to do?
a. Unplug printer from outlet
b. Use printer cord
c. Turn on your printer
d. Wait for printer to be detected

15. Why do we need to print a test page?

a. To use a blank bond paper
b. To test if the printer is on
c. To test the quality of print
d. To empty the ink tank

Quarter 2: 4th Summative Test

 Dipolog City Division
SY 2020-2021

TLE- ICT-CSS 10

Name:  __________________________________  Score:__________

Section: _________________________________ Date: ___________

Directions:  Read each question carefully and encircle the letter of correct
answer from the given choices.

1. Which of the following best describes a hard disk drive?

a. It serves as a pointing device
b. It serves as the processor
c. It serves as a pathway for the current
d. It acts as a permanent storage device.
2. Which of the following components is a high-capacity storage?
a. Hard disk drive
b. Floppy disk drive
c. Compact disc
d. Digital Versatile disc
3. Which does not describe a primary storage or often called the main memory?
a. Stores all part of the program that is being executed
b. Stores the operating system programs that manage the operation of the
computer.
c. Holds data that the program is using.
d. Interprets and carries out instructions.
4. What part of the computer system where the manipulation of symbols, numbers,
and letters occurs and controls the other parts of the computer system?
a. In the CPU
b. In the keyboard
c. In the hard disk
d. In the memory
5. Which device holds data, instructions, and information for future use?
a. The CPU
b. Hard disk
c. Storage
d. Processor
6. Why do we call computer as the most versatile form of electronic gadget?
a. Because it can multitask
b. Because it is expensive
 c. Because it can only perform complex calculations.
d. Because it is a product of series of innovation.
7. Which best describes Central Processing UNIT (CPU)?
a. It performs all of the instructions and calculations that are needed and
manages the flow of information through a computer.
b. It is the computer’s working storage space that holds data, instructions for
processing and processed data (information) waiting to be sent to the
secondary storage.
c. It holds data even when the power is ON or OFF.
d. It serves as a data pathway between several hardware components inside
or outside a computer.
8. Which of the following components is NOT a storage device?
a. Hard Disk
b. Floppy Disk
c. Compact Disc
d. Mouse
9. Primary storage is a category of computer storage, often called main memory. It
has three functions except;
a. Stores all or part of the program that is being executed
b. Stores the operating system programs that manage the operation of the
computer.
c. Holds data that the program is using
d. Interprets and carries out instructions.
10. What is the primary function of a heat sink?
a. Absorbed heat from the CPU
b. Maintain the capacity of the CPU
c. Provide electrical charge of the CPU
d. Remove dust from the CPU
11. Which of the following cannot be installed in the motherboard?
a. RAM
b. CPU
c. UPS
d. Heat sink
12. Which of the following does not belong to the group?
a. Monitor
b. Printer
c. Speaker
d. Hard disk drive
13. Which port will you connect the keyboard cable?
a. USB port
b. VGA/monitor port
 c. Parallel port
d. Audio port
14. Which of the following devices have a limitation that can only store information to
it can never erase or modify its contents?
a. CPU
b. RAM
c. Hard Disk
d. CD-ROM
15. Arrange the steps assembling PC
1) Mount the Power Supply
2) Mount the Motherboard inside the computer case
3) Open the computer case
4) Install the CPU, Memory and Fan in the Motherboard
5) Attach all external cables such as keyboard, mouse, speaker, power
supply, and UPS to there intended ports.
6) connect the power cables
7) Mount and install the Drives and External cards
8) Connect Power button, reset, and activity switch
9) Boot Computer for the First Time
a. 1,9,3,2,4,5,6,7,8
b. 8,7,6,5,4,3,2,1,9
c. 3,1,4,2,7,6,8,5,9
d. 9,5,8,6,7,2,4,1,3

PREPARED BY:

MARIA JANICE B. PAGASIAN

TLE-ICT-CSS TEACHER III-PUNTA NHS