CSS-Session Plan Grade 9
CSS-Session Plan Grade 9
DEPARTMENT OF EDUCATION
Region 02
DIVISION OF CAGAYAN
SANTA ANA FISHERY NATIONAL HIGH SCHOOL
Santa Ana, Cagayan
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
Give the functions of types of networks.
Compare the different types of networks.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set Network
Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Computer Network Discussion Read information Sheet Compare and give Compare your CHS-Configure Computer 2 hours June 19, 2018
Concept 3.1-1 on What is the functions of the answer to the Systems and Networks
Computer Network? types of network answer key
Discussion Read Information Sheet Compare the Compare your CHS-LM, Module 1, pp 64-67 2 hours June 20, 2018
on “Network” different types of answer to the
networks answer key
C. ASSESSMENT PLAN: Written test, Recitation
D. TEACHER’S REFLECTION:/ REMARKS:
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
crimp LAN cable,
configure the system
check the connectivity of your work.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set Network Configuration, Set router/ wi-fi/
wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Computer Network Concept Discussion Read information on Answer self-check Compare your answer to CHS-Install Computer 2 hours June 21, 2018
LOCAL AREA the answer key Systems and Networks, pp.
NETWORKS (LANs) 74-78
SYSTEMS AND
CONFIGURATIONS
Demonstration Perform Task Sheet 1.2- Crimp LAN Cable and Check Evaluate performance CBLM, pp. 74-78 2 hours June 22, 2018
1 the connectivity using Performance
Criteria Checklist
C. ASSESSMENT PLAN: Written test, Recitation
D. TEACHER’S REFLECTION:/ REMARKS: June 22 session plan is not executed because the teacher attended a seminar on SALN 2017 and PBB orientation at Casa Angela, Tuguegarao City.
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
Create network cable connection using Ethernet cable Cat5e.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set Network
Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Network Cable Demonstration Read “Information Sheet Perform Task Sheet 1.2-1 Evaluate performance CBLM-Installing 2 hrs June 25,
Installation 1.2-7, LANs Systems and “Network cable using Performance Computer System 2018
Configuration ” connection” Criteria Checklist and Network.
C. ASSESSMENT PLAN:
Recitation, Direct Observation, Demonstration
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked by:
LUZVIMINDA F. RENON RITA C. CORPUZ, Ph. D. WILHEMINA P. MATA, Ph.D.
Teacher III School Principal II Head Teacher III
TASK SHEET 1.2-1
Title : Network Cable Connection Performance Criteria
Did you… % Score
Performance Objective : Given the necessary tools and materials you are going
to make straight cable connection. 1. Prepared all materials needed 5
Supplies : UTP Cable, (cat5e) RJ 45
Tools/Equipment : Crimping tool
2. Used the correct procedure in crimping RJ-45 10
Network Hub
Working Computer with OS
Server 3. Crimped straight through correctly 10
Internet connection
Cable Tester 4. Checked the connectivity of two cables 10
Steps/ Procedure:
1. Prepare the necessary tools and materials 5. Observed Safety Precautions while working 5
2. Use UTP Cable and 2 RJ-45 to make Straight connection.
3. Follow the procedures in crimping UTP cable in Information sheet 1.2-7 6. Used the standard color coding of cables 5
4. Check the connectivity of your cables.
5. Let your trainer check your work. 7. Observed 5s before, during and after the task
5
8.
Assessment Method:
Demonstration with questioning , Performance Criteria checklist 9. TOTAL 50
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
Arrange the Ethernet wire cable Cat5e for patch panel properly.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set Network
Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Network Cable Discussion The trainer will facilitate Perform Activity 2. Evaluate performance CBLM-Installing 2 hrs June
Installation Demonstration group discussion on how “Memorize and create Network using Performance Criteria Computer System 26,
to wire Cat5e for the cable connection for the patch Checklist and Network. 2018
patch panel” panel –Cat5e”
C. ASSESSMENT PLAN:
Recitation, Direct Observation, Demonstration
D. TEACHER’S REFLECTION:
Prepared by: Noted:
LUZVIMINDA F. RENON RITA C. CORPUZ, Ph.D. Checked by: WILHEMINA P. MATA, Ph. D.
Teacher III School Principal II Head Teacher III
ACTIVITY SHEET 1.2 ACTIVITY SHEET 1.2
Title : Demonstrate Network Cable for the patch panel Title : Demonstrate Network Cable for the patch panel
Performance Objective : Given the necessary tools and materials you Performance Objective : Given the necessary tools and materials you are
are going to demonstrate and memorize going to demonstrate and memorize network cable
network cable connection for patch panel connection for patch panel using Cat5e..
using Cat5e..
Performance Criteria
Performance Criteria
Did you… Score
Did you… Score
15.Demonstrate the T568A and T568B properly 20
10.Demonstrate the T568A and T568B properly 20
Remarks/Comments:
Remarks/Comments:
Assessment Method:
Assessment Method:
Demonstration with questioning , Performance Criteria checklist
Demonstration with questioning , Performance Criteria checklist
Republic of the Philippines
DEPARTMENT OF EDUCATION
Region 02
DIVISION OF CAGAYAN
SANTA ANA FISHERY NATIONAL HIGH SCHOOL
Santa Ana, Cagayan
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
Draw a concrete computer network set-up.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Networking Discussion Read Information on Compare the different Compare your Downloaded 1 hr July 2,
Devices, Media Networking Devices, Media types of cables. answer to the from the internet 2018
and Connectors and Connectors answer key
Demonstration The trainer will facilitate Perform Activity. Evaluate Information sheet 1 hour July 2,
group discussion on how to “Draw a concrete performance using 2018
set-up proper connection” computer network set-up Performance
layout” checklist.
C. ASSESSMENT PLAN: Recitation, Direct Observation, Demonstration
D. TEACHER’S REFLECTION: /REMARKS:
Prepared by: Noted: Checked by:
LUZVIMINDA F. RENON RITA C. CORPUZ, PhD. WILHEMINA P. MATA, PhD.
Teacher III Principal II Head Teacher III
Republic of the Philippines
DEPARTMENT OF EDUCATION
Region 02
DIVISION OF CAGAYAN
SANTA ANA FISHERY NATIONAL HIGH SCHOOL
Santa Ana, Cagayan
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
Give the different types of networks
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Concept of Discussion Powerpoint presentation Compare the different Compare your Downloaded 1 hr July 3,
Network and types of network and answer to the from the internet 2018
Communication communication. answer key
(Types of Demonstration The trainer will facilitate Perform Activity. Evaluate Information sheet 1 hour July 3,
Computer group discussion on types “Discuss and give the performance using 2018
Network) of networks” difference of the types of Performance
networks ” checklist.
C. ASSESSMENT PLAN: Recitation, Direct Observation, Demonstration
D. TEACHER’S REFLECTION: /REMARKS:
Prepared by: Noted: Checked by:
LUZVIMINDA F. RENON RITA C. CORPUZ, PhD. WILHEMINA P. MATA, PhD.
Teacher III Principal II Head Teacher III
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Concept of Discussion Powerpoint presentation Compare the different Compare your Downloaded 1 hr July 4,
Network and network topologies. answer to the from the internet 2018
Communication answer key
(Network Demonstration The trainer will facilitate Perform Activity. Evaluate Information sheet 1 hour July 4,
Topologies) group discussion on “Draw a network topology performance using 2018
“network topologies” and give their functions” Performance
checklist.
C. ASSESSMENT PLAN: Recitation, Direct Observation, Demonstration
D. TEACHER’S REFLECTION: /REMARKS:
Prepared by: Noted: Checked by:
LUZVIMINDA F. RENON RITA C. CORPUZ, PhD. WILHEMINA P. MATA, PhD.
Teacher III Principal II Head Teacher III
Republic of the Philippines
DEPARTMENT OF EDUCATION
Region 02
DIVISION OF CAGAYAN
SANTA ANA FISHERY NATIONAL HIGH SCHOOL
Santa Ana, Cagayan
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
Perform activity showing safety procedures in a workplace.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
OHS standards and Discussion The trainer will facilitate Activity 1. Peer to peer Evaluate performance LM-Module 3, 2 hours July 9,
safety precautions discussion on Safety activity “cause and effect using Performance pp. 48-50 2018
Precautions in a work on the different safety checklist.
area. precautions”
C. ASSESSMENT PLAN: Written test, Recitation
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked by:
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 1. Install Network Cables
Differentiate the 5s principle
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Practicing 5s and its Discussion The trainer will facilitate Site situations showing Evaluate performance Downloaded 2 hrs. July 10,
environmental policies the discussion on 5s the 5s principle using Performance from the Internet 2017
principle through checklist.
powerpoint presentation
C. ASSESSMENT PLAN: Written test, Recitation
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked by:
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 2. Set Network Configuration
Differentiate networks according to topology
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Topology Discussion Read “ Information about Group activity: Showing the Evaluate Downloaded 2 hours July 12, 2018
networks according to pictures of networks performance using from the
topology” according to topology and Performance Internet
give their functions checklist.
Demonstration Computer Exhibit Make different outputs Finished at least 1- Recycled 2 hours July 13, 2018
compose of computer parts 2 output computer
peripherals
C. ASSESSMENT PLAN: Written test, Recitation, Discussion
D. TEACHER’S REFLECTION:/Remarks (To prepare products in preparation for the foundation day)
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 2. Set Network Configuration
Identify the functions of protocols.
Familiarize how internet and networks work.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
IPV4 and IPV6 Discussion Read “ Internet Activity 1. “ Answer the Compare your answer CHS-LM- 5 hrs July 31, August
IP Addressing Self-paced Protocols ” Activity Questions to the answer key Module3 pp. 98- 1-2, 2017
101
C. ASSESSMENT PLAN: Written test, Recitation, Oral Questioning
D. TEACHER’S REFLECTION:
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 2. Set Network Configuration
Give the features of Wireless Access Point
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Wireless Access Discussion The trainer will facilitate Answer self-check Compare your answer to Downloaded from 3 hours August 22,
Point the discussion on about wireless the answer key the internet 23,24, 2017
wireless access point access point
C. ASSESSMENT PLAN: Written test, Recitation, Discussion
D. TEACHER’S REFLECTION: (8-25-typhoon Jolina)
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 2. Set Network Configuration
Give the roles of the Network Interface Card
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Network Interface Discussion The teacher will Give the roles of the Compare your answer Downloaded 2 hours September
Card facilitate the discussion Network Interface Card to the answer key from the Internet 4, 2017
on NIC.
C. ASSESSMENT PLAN: Written test, Recitation, discussion
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked:
LUZVIMINDA F. RENON RITA C. CORPUZ WILHEMINA P. MATA
Teacher III School Principal II Head Teacher III
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 2. Set Network Configuration
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set Network Configuration, Set router/
wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Network Connectivity Discussion The teacher will facilitate the Answer questions Compare your answer Downloaded from the
checking procedures and (Get the description discussion on network given to the answer key Internet
techniques of the ping command connectivity checking CHS-Module3 pp. 108- 3 hrs September 11, 12,
Ping syntax) procedures and techniques 111 2017
IP Config Discussion The teacher will facilitate the Answer questions Compare your answer CHS-Module3 pp.98- 2 hrs September 13,
(Remember the steps discussion on IP Config given to the answer key 107 2017
on how to use IP
Config command)
Demonstration The teacher will facilitate the Perform activity Evaluate performance CHS-Module3 pp. 111 2 hrs September 14,
(Perform demonstration on IP Config on Protocols using the given criteria 2017
configuration on Configure Evaluate performance CHS-Module3 pp. 114- 4 hrs September 15-18,
wireless router) Ethernet NIC to using the given criteria 119 2017
use DHCP
Configure Evaluate performance CHS-Module3 pp. 120- 3 hrs September 19-20,
Wireless Router using the given criteria 122 2017
C. ASSESSMENT PLAN: Written test, Recitation, demonstration
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked:
LUZVIMINDA F. RENON RITA C. CORPUZ WILHEMINA P. MATA
Teacher III School Principal II Head Teacher III
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 2. Set Network Configuration
Perform Remote Desktop in a Client server Connection
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Remote Desktop Discussion The trainer will facilitate Give the features of Answer self-check Downloaded 3 hours September 21-
discussion on Remote the Remote Desktop from the 22, 2017
Desktop internet
Demonstration The trainer will facilitate Group activity on Evaluate Downloaded 3 hours September
the group activity on setting up Remote performance from the 25-26, 2017
setting up Remote Desktop base on criteria internet
Desktop checklist
C. ASSESSMENT PLAN: Written test, Recitation, Discussion
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked:
LUZVIMINDA F. RENON RITA C. CORPUZ WILHEMINA P. MATA
Teacher III School Principal II Head Teacher III
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 3. Set Router/ Wi-Fi/ Wireless Access Point/Repeater Configuration
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Discussion The teacher will facilitate Give the Answer self-check Downloaded 2 hours October 2-4, 2017
discussion on Gateways features of from the
gateways internet
C. ASSESSMENT PLAN:
Written test, Recitation
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked:
LUZVIMINDA F. RENON WILHEMINA P. MATA
Teacher III Head Teacher III
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 3. Set Router/ Wi-Fi/ Wireless Access Point/Repeater Configuration
Give the importance of security settings
Enumerate commonly known anti-viruses
Perform security firewall setting.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Security/ Firewall/ Discussion The teacher will facilitate Give the features Answer self-check CHS Module3, 2 hours November 13, 2017
Advanced Setting discussion on Firewalls of Firewalls pp. 141-151
Configuration
C. ASSESSMENT PLAN: Written test, Recitation, Demonstration
D. TEACHER’S REFLECTION:
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 3.Install Operating System and drivers for peripherals/ devices
Remember the steps in Windows 7 installation
Perform Windows 7 installation
A. INTRODUCTION: This module covers the outcomes required in installing and configuring desktop and workstation computer systems. It consists of competencies to assemble
computer hardware, install operating systems and drivers for peripherals / devices, and install application software as well as to conduct testing and documentation.
LEARNING ACTIVITIES:
LO3. Install Operating Systems (W7)
Learning Content Methods Presentation Practice Feedback Resources Time Date
Install/ Update Demonstration The teacher will demonstrate Perform Compare your answer to CBLM, CHS Module 2 hrs November
Operating Systems to the students on how to installation of the performance score card 1 pp. 123-132 14, 2017
perform Windows 7 Windows 7
Demonstration Demonstrate windows 7 Perform windows 7 Compare your answer to CBLM, CHS Module 1 hour November
installation by the students installation the performance score card 1 pp. 123-132 15, 2017
B. ASSESSMENT PLAN: Written, Interview, Performance Test
C. TEACHER’S REFLECTION: Topic from the Competency –Installing and Configuring Computer Systems is a pre-requisite to perform the LAN connectivity and setting up Computer
Networks.
Prepared by:
LUZVIMINDA F. RENON Checked by: WILHELMINA P. MATA
Teacher III Noted: Head Teacher III
RITA C. CORPUZ, Ph.D.
School Principal II
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 3. Set Router/ Wi-Fi/ Wireless Access Point/Repeater Configuration
Give the basic network categories.
Differentiate LAN to WAN.
Give the features of LAN and WAN.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Local Area Network/ Discussion Read “ Information Sheet 1.2-7 Give the basic Answer self- CHS-Installing Computer 2 hours November
Wide Area Network on LOCAL AREA NETWORKS Network check Systems and Networks – 20, 2017
(LANs) SYSTEMS AND categories LANs Systems and
CONFIGURATIONS ” Configurations
Discussion WIDE AREA NETWORKS Read the topic Question and Downloaded from the 1 hour November
answer activity Internet 21, 2017
C. ASSESSMENT PLAN: Written test, Recitation, Oral Questioning
D. TEACHER’S REFLECTION:
Prepared by: Noted: Checked:
LUZVIMINDA F. RENON RITA C. CORPUZ, Ph.D WILHEMINA P. MATA
Teacher III School Principal II Head Teacher III
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set up Computer Servers
Module Title: Setting up Computer Servers
LEARNING OUTCOME:
LO 1. Set up user access
Cite the features of client-server network.
Set-up client-server network.
A. INTRODUCTION: This module covers the outcomes required in setting –up computer servers. It consists of competencies to set up user access, configure network
services, and perform testing, documentation and pre deployment procedures.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Set-up Client-Server Discussion The trainer will facilitate the Cite the features of Compare your answer to CHS-Module3 2 hours December
network access discussion on setting up client- client-server network the answer key pp. 135 11, 2017
server network access
Demonstration The trainer will facilitate the group Set-up Client-Server Evaluate performance CHS-Module3 4 hours December
activity on setting up client-server Network Access base on criteria checklist pp. 135 12,13,14,15,
network access 2017
C. ASSESSMENT PLAN: Written test, Recitation
D. TEACHER’S REFLECTION:
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set up Computer Servers
Module Title: Setting up Computer Servers
LEARNING OUTCOME:
LO2. . Configure Network services
A. INTRODUCTION: This module covers the outcomes required in setting –up computer servers. It consists of competencies to set up user access, configure
network services, perform testing, documentation and pre deployment procedures.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Domain Name Discussion The teacher will facilitate Give the steps on setting Compare your answer to Downloaded 1 hour January
Server discussion about domain up domain name server the answer key from the internet 16, 2018
name server
Demonstration The teacher will facilitate Group activity on setting Evaluate performance Downloaded from 2 hours January
the activity on domain up domain name server base on criteria checklist the internet 17, 2018
name server.
C. ASSESSMENT PLAN: Written test, Recitation
D. TEACHER’S REFLECTION: January 12-conducted the 3rd quarter exam. January 15-Checking of Test Papers and analyzing the result
Prepared by: Noted: Checked by:
LUZVIMINDA F. RENON RITA C. CORPUZ WILHELMINA P. MATA
Teacher III School Principal II Head Teacher III
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set up Computer Servers
Module Title: Setting up Computer Servers
LEARNING OUTCOME:
LO2. . Configure Network services
A. INTRODUCTION: This module covers the outcomes required in setting –up computer servers. It consists of competencies to set up user access, configure network
services, and perform testing, documentation and pre deployment procedures.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Domain Controller Discussion The teacher will facilitate discussion Give the steps on Compare your answer Downloaded from 1 hr January 16,
(Active Directory) about domain controller (Active setting up domain to the answer key the internet 2018
Directory) controller
Demonstration The teacher will facilitate the activity Group activity on Evaluate performance Downloaded from 2 January 17,
on domain controller (Active setting up domain base on criteria the internet hours 2018
Directory). controller checklist
C. ASSESSMENT PLAN: Written test, Recitation, Demonstration
D. TEACHER’S REFLECTION:
Prepared by: LUZVIMINDA F. RENON, T-3 Noted: RITA C. CORPUZ, Ph.D, P-2 Checked: WILHELMINA P. MATA, Ph.D., HT-
Republic of the Philippines
DEPARTMENT OF EDUCATION
Region 02
DIVISION OF CAGAYAN
SANTA ANA FISHERY NATIONAL HIGH SCHOOL
Santa Ana, Cagayan
Sector: Electronics
Qualification Title: Computer Systems Servicing NC II
Unit of Competency: Set- Up Computer Networks
Module Title: Setting- Up Computer Networks
LEARNING OUTCOME:
LO 3. Set Router/ Wi-Fi/ Wireless Access Point/Repeater Configuration
Identify what is Local Area Network.
Acquire knowledge in Configuring Local Area Network.
A. INTRODUCTION: This module covers the outcomes required in setting up computer networks. It consists of competencies to install Network Cables, Set
Network Configuration, Set router/ wi-fi/ wireless access point/ repeater configuration as well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES:
Learning Content Methods Presentation Practice Feedback Resources Time Date
Configure Local Discussion Activity 1. “List Down the 2 hours February 5,
Area Network Equipment and Peripherals Compare your Info Sheet 1.3- 2018
Read “Configure Needed for Configuring LAN. answer to the 2. “Configure
Discussion Local Area Network Give the steps in configuring answer key Local Area 1 hour February 6,
” Local Area Network. Network ” 2018
Demonstration Perform Task Sheet 1.3-2. Evaluate 3 hours February 7,
Configure Local Area Network performance base 2018
on criteria checklist
C. ASSESSMENT PLAN: Written test, Recitation, Oral Questioning
D. TEACHER’S REFLECTION: February 8, 2018-Teacher is OB, February 9, 2018- Continuation of Activity dated February 7, 2018
Prepared by: Noted: Checked:
LUZVIMINDA F. RENON RITA C. CORPUZ, Ph.D, WILHEMINA P. MATA
Teacher III Principal II Head Teacher III
Republic of the Philippines
DEPARTMENT OF EDUCATION
Region 02
DIVISION OF CAGAYAN
SANTA ANA FISHERY NATIONAL HIGH SCHOOL
Santa Ana, Cagayan
Demonstration Setting up Firewall Perform Setting up Evaluate CBLM, Setting up 3 hours February
Firewall with performance computer networks , 13-14, 2018
advanced security base on criteria Information sheet 1.3-5
checklist
C. ASSESSMENT PLAN: Written test, Recitation, demonstration, oral questioning
D. TEACHER’S REFLECTION:
Prepared by:
LUZVIMINDA F. RENON
Teacher III Noted: Checked by: WILHEMINA P. MATA
RITA C. CORPUZ, Ph.D. Head Teacher III
Principal II
Republic of the Philippines
DEPARTMENT OF EDUCATION
Region 02
DIVISION OF CAGAYAN
SANTA ANA FISHERY NATIONAL HIGH SCHOOL
Santa Ana, Cagayan