3RD PERIODIC TEST

TVE-CSS 10

Name: ___________________________________ Section: ___________________________________Date: _____________________ Score:

_______________

Direction: Identify what is being asked. Select your

answers from the box and write them in the space
provided.
1. What type of Ethernet cable is commonly used to 13. According to the "Straight Through" cable diagram,
connect a computer to a network switch or hub? what color of wire is found in pin 5 of a patch cable?
A) Crossover cable B) Fiber optic cable a. White/Orange b. Green
C) Coaxial cable D) Straight-through cable c. White/Blue d. White/Brown
2. What is the color order of the conductors (wires) in a 14. What is the primary purpose of manual IP
T568B Ethernet cable from left to right when looking at the configuration in a computer network?
connector with the metal pins facing down? a. To automatically assign IP addresses to devices
A) White/Orange, Orange, White/Green, Blue, White/Blue, b. To allow devices to obtain IP addresses from a DHCP
Green, White/Brown, Brown server
B) White/Green, Green, White/Orange, Blue, White/Blue, c. To assign a specific IP address to a device, typically for
Orange, White/Brown, Brown static setups
C) White/Blue, Blue, White/Orange, Orange, White/Green, d. To enable automatic network discovery and mapping
Green, White/Brown, Brown 15. To create an ethernet cable, what is the recommended
D) White/Brown, Brown, White/Orange, Orange, length to strip the outer jacket of the network cable before
White/Green, Green, White/Blue, Blue proceeding with further steps?
3. What is the primary purpose of a crossover Ethernet A. 1 inch B. ½ inch C. 3 inches D. 2 ½ inches
cable? 16. What does the acronym UTP stand for in the context of
A) To connect a computer to a network switch or hub. networking cables?
B) To extend the length of a network cable. a. Universal Transmission Protocol
C) To directly link two devices of the same type, such as b. Unshielded Twisted Pair
two computers. c. Unified Telecommunications Platform
D) To connect a computer to a router. d. Unshielded Transmit Protocol
4. In the context of Ethernet cables, what do the terms 17. In a network setup, you want to connect two switches
"T568A" and "T568B" refer to? together to expand the network capacity. What type of
A) Ethernet cable categories B) Connector Ethernet cable should you apply to link the two switches
sizes effectively?
C) Color code standards for wiring D) Cable shielding a. Straight-through cable b. Fiber optic cable
types c. Crossover cable d. Coaxial cable
5. What is the purpose of manually configuring an IP 18. You need to connect a computer to a network switch in
address on a device in a network? a large office network. What type of Ethernet cable should
A) To dynamically obtain an IP address from a DHCP server you apply to establish this connection?
B) To simplify network management and ensure a a. Crossover cable c. Coaxial cable
consistent IP address b. Fiber optic cable d. Straight-
C) To automatically renew IP addresses periodically through cable
D) To identify available DHCP servers in the network 19. You are setting up a computer network and need to
6. An IP address is divided into what two parts? assign a specific IP address to a server. Which method of
a. Physical and logical b. Physical and emotional IP configuration should you apply to manually set the
c. Network and subnet d. Network and host server's IP address?
7. When using DHCP, how does a device obtain its IP a. DHCP IP Configuration b. Static IP
address automatically? Configuration
a. By requesting an IP address from the DNS server b. Automatic IP Configuration d. Dynamic IP
b. By sending a broadcast request to a DHCP server Configuration
c. By manually entering the IP address in the device 20 Which of the following cables has T568A on one end
settings and T568B on the other?
d. By obtaining the IP address from a local file a. Crossover cable b. Straight-through cable
8. A company needs to connect its offices in different c. fiber straight cable d. Both A and B
countries. Which type of network should they use? 21. You are working on a broadband installation project,
a. PAN b. LAN c. WAN d. MAN and you need to securely fasten connectors to coaxial
9. What is the primary function of a crossover cable in a cables. Which hand tool should you apply to achieve this
network setup? task effectively?
a. To connect a computer to a network switch or hub a. Cable tester b. Crimping tool
b. To extend the length of a network cable c. Multimeter d. Cable stripper
c. To enable direct communication between two devices of 22. what is the IP address class of 150.255.255.254.
the same type a. Class A b. Class B c. Class C d. Class D
d. To connect a computer to a printer 23. What type of network connects multiple LANs within a
10. Which of the following scenarios would typically city, facilitating high-speed data exchange between?
require the use of a straight-through Ethernet cable? a. PAN b. LAN c. WAN d. MAN
a. Connecting a computer directly to another computer 24. You are working on a network configuration where you
for file sharing need to establish a connection between two switches.
b. Connecting a computer to a network switch or hub Which type of cable should you analyze and use to ensure
c. Extending the length of a network cable proper communication between the switches?
d. Connecting a computer to a router a. Straight-through cable b. Fiber
11. What happens if you use a straight-through Ethernet optic cable
cable instead of a crossover cable to connect two c. Coaxial cable d.
computers directly? Crossover cable
a. The connection will work as expected. 25. In a network setup, you need to evaluate the most
b. The connection will not function, and communication appropriate type of Ethernet cable for connecting a
between the computers will fail. computer to a router. Which type of cable should you
c. The computers will experience a power surge. choose, and why?
d. The data transfer speed will increase significantly. a. Straight-through cable because it provides maximum
12. In networking cabling, what does the acronym STP bandwidth.
stand for? b. Crossover cable because it ensures bidirectional data
a. Standard Transmission Protocol flow.
b. Shielded Twisted Pair c. Coaxial cable because it offers superior signal quality.
c. Simple Telecommunications Protocol d. Fiber optic cable because it's the most versatile
d. Security Transmission Protocol 26. You are troubleshooting a network connectivity issue,
and you suspect that the Ethernet cable might be the
problem. After evaluating the cable's wiring, you find that 39. It diagrams all the actual components of your network,
it uses the T568A color code at one end and the T568B including cords, plugs, racks, ports, servers, cables, and
color code at the other. What can you conclude about this more.
cable configuration? a. Physical Topology b. Logical topology
a. It is a straight-through cable. c. Mesh Topology d. Star topology
b. It is a crossover cable.
c. It is improperly configured and needs rewiring.
d. It is a fiber optic cable.

40. The IP address class of 150.255.255.254.

a. Class A b. Class B c. Class C d. Class D
41. It shows the type of network topology (bus, ring, etc.),
and how the data flows between the physical objects in
your network.
27. Which of the following is the default subnet mask for a. Physical Topology b. Logical topology c.
the class B IP address? Mesh Topology
a. 255.255.0.0 b. 255.255.255.0 42. It is a topology for a Local Area Network (LAN) in which
c. 255.0.0.0 d. 255.255.255.25528. all nodes are individually connected to a central
28. Which of the following is an example of a local area connection point, like a hub or a switch.
network (LAN)? a. Star Topology b. Bus Topology
a. The internet c. Ring Topology d. Tree Topology
b. A network within a single office building 43. In this topology, all the nodes are connected in a
c. A satellite communication network closed loop.
d. A nationwide banking network a. Star Topology b. Bus Topology
29. In which topology does the addition or removal of c. Ring Topology d. Tree Topology
devices have minimal impact on the rest of the network? 44. It consists of a single cable with the terminator at
a. Bus Topology b. Star Topology each end.
c. Ring Topology d. Mesh Topology a. Star Topology b. Bus Topology
30. In Packet Tracer, where can you find the option to add c. Ring Topology d. Tree Topology
a router to the network?
a. Tools panel b. Devices panel
c. Connections too d. Simulation mode
31. Which IP address range belongs to Class B IP Address?
a. 10.0.0.0 - 10.255.255.255 b. 172.16.0.0 - 45. This is a "hybrid" topology that combines
172.31.255.255 characteristics of linear bus and star topologies
c. 192.168.0.0 - 192.168.255.255 d. All of the above a. Star Topology b. Bus Topology
32. In a manual IP configuration, what information needs c. Ring Topology d. Tree Topology
to be set to ensure proper communication on a network? 46. It is a cross-platform visual simulation tool designed
a. Subnet Mask b. Default Gateway by Cisco Systems that allows users to create network
c. Both a and b d. Network Name topologies and imitate modern computer networks.
33. What does DHCP stand for in the context of automatic a. Cisco Packet Tracer
IP configuration? b. Cisco Packet Tracer window
a. Dynamic Host Configuration Protocol c. Cisco Packet Tracer Logical Workspace
b. Domain Host Control Protocol d. None of the above
c. Distributed Host Configuration Platform 47. What part of CISCO packet tracer window is being
d. Dynamic Host Computer Platform shown on the picture?
34. It is used for testing twisted pair wire connections, with
RJ11, RJ12, RJ45 connectors.
a. Cable Tester b. multimeter tester
c. loopback adapter d. wire stripper
35. It is a device used to conjoin two pieces of metal by
deforming one or both of them in a way that causes them a. Menu bar b. Main Toolbar c. Logical Toolbar
to hold each other. 48. What part of CISCO packet tracer window is being
a. cable tester b. Crimping tool shown on the picture?
c. RJ 45 d. Punch down tool with a. Menu bar b. Main Toolbar c. Logical
wire striper Toolbar
36. It is the process of visualizing all the devices on your 49. Apply the appropriate IP address and subnet mask for
network, how they’re connected, and how the overall a device on the network if the default gateway is
network is structured. 192.168.1.1.
a. Network Mapping b. Network c. Topology d. A. IP: 192.168.1.50, Subnet Mask: 255.255.255.0
Internet B. IP: 192.168.2.10, Subnet Mask: 255.255.255.0
37. The geometric arrangement of a computer system. C. IP: 192.168.1.10, Subnet Mask: 255.255.255.128
a. Network Mapping b. Network c. Topology d. D. IP: 192.168.0.5, Subnet Mask: 255.255.255.192
Internet 50. Which network topology is characterized by many redundant
38. It is defined as a group of two or more computer interconnections between network nodes?
systems linked together. a. Mesh Topology b. Star Topology
a. Network Mapping b. Network c. Topology d. c. Bus Topology d. Ring Topology
Internet
Answer Key
IP Address
System Configuration
Class A
Class B
Subnet mask
Crimping tool
UTP Cable
Class C
Cable Tester
Wire stripper