Scribd
Upload
13 views

Opening Prayer

The document provides steps on how to disassemble a desktop PC by removing components like the side covers, fans, storage drives, RAM, power supply, motherboard, and expansion cards. It explains generally to disconnect all cables and unscrew or unlock parts before removal. The process is then reversed to reassemble the computer.

Uploaded by

racel orpiada
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
13 views

Opening Prayer

The document provides steps on how to disassemble a desktop PC by removing components like the side covers, fans, storage drives, RAM, power supply, motherboard, and expansion cards. It explains generally to disconnect all cables and unscrew or unlock parts before removal. The process is then reversed to reassemble the computer.

Uploaded by

racel orpiada
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 25

OPENING PRAYER

COMPUTER SYSTEMS
Q3-W5
SERVICING NC II
desktop PC
& rebuild a
disassemble
How to

Prepared by:
Ma’am Reyz
ICT-TVL Teacher II
• ROWAN MURPHY
• SEO Strategist
COMPUTER SYSTEMS
SERVICING NC II
OBJECTIVES:
To perform the basic skills that are necessary to
disassemble a PC.
The learners should know how generally to process
unplug all the cords and cables connecting a component to
other components, then remove the part from the case or
frame.

References: (Author, Title, Pages) DepEd K to 12 Basic Education Prepared by:


Program-LM, TLE-ICT CHS, p.43-47 C. Caido, CVIF Learning Ma’am Reyz
Activities ICT-TVL Teacher II
COMPUTER
DISASSEMBLY
Whether you’re taking apart your computer to scrap it, install new
components, clean it, or just to see how it works, our guide shows
you how to take it all apart, then put it back together.

Generally, the process is to unplug all the cords and cables


connecting a component to other components, then remove the part
from the case or frame. Components can be attached to the case with
special clips, screws, or by insertion into a holder. In each case, no
more than a small amount of force is needed to remove the part. If
it’s not moving, check for more attachments that are holding the
component in place.

References: (Author, Title, Pages) DepEd K to 12 Basic Education Prepared by:


Program-LM, TLE-ICT CHS, p.43-47 C. Caido, CVIF Learning Ma’am Reyz
Activities ICT-TVL Teacher II
The learners should guess the jumbled letters.
Students whose guess the answer will give a points graded inwritten and
performance task

JUMBLED LETTERS
MAR
RANDOM ACCESS
MEMORY
OWPRE PSLPYU
POWER SUPPLY
RHEMOTH BRDOA
MOTHER BOARD
IPPHLI WCRSE
RRIEDVE
PHILIP SCREW
DRIVER
SDISSAYLBEM
DISASSEMBLY
COMPUTER SYSTEMS
SERVICING NC II
PC
Disassemble
Steps in
STEPS IN
DISASSEMBLE PC
You will need a small Phillips-head screwdriver and depending on the
manufacturer of your components, possibly a flathead screwdriver. The metal
inside the computer case can be sharp, so you might want gloves, as well.

1 – Unplug your computer and peripheral items


Turn off the computer, unplug the power cord and unplug any
peripheral items attached to the computer, such as the keyboard,
mouse, monitor, headphones, and any external drives.
Wear a grounding strap or touch an unpainted metal part of the
computer to discharge any static electricity.

https://www.crucial.com/articles/pc-builders/disassemble-and-rebuild
STEPS IN
DISASSEMBLE PC
2 – Remove side cover
Remove at least one of the side covers, usually the right side as you face the
front of the computer. You might find it easier to access all the parts if you
remove both side covers; there are sometimes thumb screws on the covers to
make access easier.

3 – Disconnect connectors
Disconnect all the connectors, then remove any card readers and
internal DVD players. These are usually screwed into place.
https://www.crucial.com/articles/pc-builders/disassemble-and-rebuild
STEPS IN
DISASSEMBLE
4 – Remove standalone fans PC
Remove any standalone fans. This is a good time to remove any dust, lint, and
pet hair from the fans if you’re planning on reusing them.

5 – Remove the storage drive


Disconnect the cables and remove the storage drive. Generally, storage
drives are held in place by multiple screws. If you have a hard drive, be
gentle when moving the drive as hard bumps can damage the internal
parts.
https://www.crucial.com/articles/pc-builders/disassemble-and-rebuild
STEPS IN
DISASSEMBLE
6 – Remove memory (RAM) modules PC
Remove the memory (RAM) modules by pushing the clips on both ends of the
module down. This will cause the module to pop up for easy removal. Do not
touch the gold connectors on the chips if you’re reusing the modules. If you're
not reusing the RAM.

7 – Remove power supply unit


Remove the power supply unit by unplugging the remaining connectors,
then unscrewing the unit from the frame.

https://www.crucial.com/articles/pc-builders/disassemble-and-rebuild
STEPS IN
DISASSEMBLE
8 – Remove motherboard adapter or expansion cards PC
Remove any adapter or expansion cards from the motherboard. Although these cards
usually slide into preconfigured slots, there can be screws. Do not touch the gold
connectors on the cards if you’re reinstalling the cards.

9 – Remove the motherboard


Disconnect all the cables from the motherboard, then unscrew it from the
frame by loosening each screw a little bit before going around again to
loosen each screw properly. This prevents any potential warping of the
motherboard by gradually releasing the tension on it.
https://www.crucial.com/articles/pc-builders/disassemble-and-rebuild
STEPS IN
DISASSEMBLE
All the components should now be out of the computer case. PC
If you’re reusing the
case, this is a good time to get rid of all the dust and lint that might have collected.

9 – Remove the motherboard


Disconnect all the cables from the motherboard, then unscrew it from the
frame by loosening each screw a little bit before going around again to
loosen each screw properly. This prevents any potential warping of the
motherboard by gradually releasing the tension on it.
https://www.crucial.com/articles/pc-builders/disassemble-and-rebuild
COMPUTER
REASSEMBLY
If you are rebuilding the computer, insert the components in the opposite order you
removed them, starting with the motherboard. Plug in all the cables as you insert
the component; most items will plug into the motherboard and the power supply
unit.

Congratulations, you’ve disassembled,


and possibly reassembled your computer!

https://www.crucial.com/articles/pc-builders/disassemble-and-rebuild
CONGRATULATIONS,
YOU’VE DONE!

THANK YOU AND GOD


BLESSED US!
racel.orpiada@yahoo.com
racel.orpiada@deped.gov.ph

Ma’am Reyz
ICT-TVL Teacher II

You might also like