11

TECHNICAL -VOCATIONAL LIVELIHOOD (TVL)

INFORMATION AND COMMUNICATIONS
TECHNOLOGY

COMPUTER SYSTEMS SERVICING NC II

QUARTER 2
WEEK 5

CapSLET
Capsulized Self-Learning Empowerment
Toolkit

Schools Division Office of Zamboanga City

Region IX, Zamboanga Peninsula
Zamboanga City
SUBJECT &
GRADE/LEVEL
CSS G12 QUARTER 2 WEEK 5

TOPIC INSTALLING AND CONFIGURING COMPUTER SYSTEMS (ICCS)

LEARNING CODE
Install drivers for peripherals/ devices of
COMPETENCY
Windows 7 and 10. TLE_IACSS912ICCS-IIa-
j-30

LEARNING 1. Install & Configure peripherals/ devices in accordance with manufacturer’s

OBJECTIVES instructions and/ or OS installation procedures.

IMPORTANT: Do not write anything on this material. Write your answers on the learner’s activity and
assessment sheets provided separately.

UNDERSTAND
Topic: Install and Configure of peripherals devices.

4. Install drivers or plug in the device.

A keyboard, mouse, touch pad, barcode
reader, biometric device (for example, a
fingerprint reader), touch screen, motion
controller, scanner, microphone, game pad,
joystick, digitizer, digital camera, smart card
reader, webcam, camcorder, MIDI-enabled
devices, speakers, and display devices.

Here are the general procedures to install any

peripheral device:
1. Read the manufacturer's directions.

5. Install the application software to use the

device.

2. Make sure the drivers provided with the

device are written for the operating system
(OS) you are using.

Note: Plug a mouse or keyboard into a USB port

and Windows should immediately
recognize it and install generic drivers.
Because PS/2 ports are not hot-pluggable,
you must restart Windows after plugging a
3. Make sure the mouse or keyboard into a PS/2 port.
motherboard port
you are using is
enabled.
 SAQ-1: How do I install device drivers?
__________________________________________________________________________________________________________

SAQ-2: How do I connect peripheral devices to my computer?

__________________________________________________________________________________________________________
SAQ-3: What is a peripheral driver?
__________________________________________________________________________________________________________

Most common peripheral devices you might be called on to install:

• Plug a mouse or keyboard into a USB port and Windows should immediately recognize it and
install generic drivers.
• A digital camera or camcorder can hold images
Ways to transfer images from your camera or camcorder to a computer.
a. Connect the camera or camcorder to the computer using a cable. Using embedded memory or
flash memory cards, you can connect the device to your computer using a USB or FireWire port
and cable.
b. To connect the device to the computer, you might need to first install the software and then connect
the device, or you might need to connect the device and then install the software.
c. Read the camera or cam-corder documentation to find out which order to use.
d. After the device and software are installed, the software displays a menu to download images or
video to your computer.
• Install the memory card in the computer.
• A webcam (web camera) is embedded in most laptops and can also be installed as a peripheral
device using a USB port or some other port.
• A printer connects to a single computer or to the network.

A local printer connects directly to a computer by way of a USB port, serial port, or wireless
connection (Bluetooth or Wi-Fi).
a. A network printer has an Ethernet port to connect directly to the network or uses Wi-Fi to
connect to a wireless access point.
b. A local printer can be attached to a computer using a port (for example, USB, serial, or
wireless) on the computer.
c. The printer can be dedicated to only this one computer, or you can share the printer for
network users.
d. To use the printer, any computer on the network can install this printer and print to it, which is
called remote printing.
e. Serial. For a printer with a serial port, plug the serial cable into the printer and computer and
install the printer as a local printer.
f. Ethernet. Plug the Ethernet cable into the printer and network wall jack, switch, or router and
install the printer as a network printer on any computer on the network.
g. Bluetooth. For a Bluetooth printer, which is installed as a local printer, turn on Bluetooth in
Windows, move the printer within range of the computer, and watch as the two Bluetooth
devices pair up.
h. Wi-Fi ad hoc network. For a Wi-Fi printer, you can connect the printer and computer directly
to each other in a Wi-Fi Ad Hoc Mode network.

Installing a network printer is sometimes called mapping a printer. Follow these steps to install a wired
or Wi-Fi network printer, serial-port printer, or Bluetooth printer in Windows:

1. Make sure the printer is connected to the network or the computer. In Control Panel in Classic view,
click Devices and Printers. In the Devices and Printers window, click Add a printer. Windows
searches for available printers and lists them
2. Select the printer and click Next. If your printer isn't listed, click the printer that I want isn't listed and
select the printer from a list of printers for which Windows has drivers.
3. In the next box, select the brand and model printer to use the drivers kept by Windows. To use
drivers stored on CD or previously downloaded from the web, click Have Disk. The Install from Disk
box appears. Click Browse to locate the drivers; Windows is looking for an .inf file. Be sure to
select 32-bit or 64-bit drivers, depending on which type of OS you are using.
4. Continue to follow the wizard to install the printer. Dialog boxes give you the opportunity to change
the name of the printer and designate the printer as the default printer. You are also given the
opportunity to test the printer. It's always a good idea to print a test page when you install a printer
to verify the installation works.
 Let’s Do This! ( Answer this in a separate sheet)

Let’s Practice!

Directions: Write the letter of the correct answer on the blank.

1. _____ An electronic device that generates a digital representation of an image for data input to
a computer
a. Touch Screen
b. KVM
c. Musical Digital Interface
d. Scanner

2. _____ Authenticates a person's identity by translating a personal characteristic into a digital

code that is compared with a digital code in a computer: Fingerprint, Face, & Retinal.
a. Biometric Device
b. KVM
c. Musical Digital Interface
d. Scanner
3. ______ Devices that enable the computer to give the user the results of the processed data;
Printer, Speaker, & Display
a. Touch Screen
b. Output Devices
c. Musical Digital Interface
d. Scanner
4. _______
a. Biometric Device
b. KVM
c. Musical Digital Interface
d. Scanner
5. ______ Wireless; Blue-tooth; wired - USB, PS2
a. Biometric Device
b. Keyboard
c. Mouse
d. Scanner

6. ______ An input device that enters data with letters, numbers, symbols, and special function
keys. (Wireless, Wired - USB, PS2)

a. Scanner
b. Barcode Reader
c. Output Devices
d. Keyboard
7. _____ Keyboard - An input device that reads barcodes.(Wired - USB , Blue Tooth)
a. True
b. False

8. _____ Other Input Devices- (Game controllers, Digitizer, Motion sensor, Touch Pad, Smart
Card, Digital camera, Microphone, Webcam)
a. True
b. False
9. _____ Other Input- (KVM, Touch Screen, Musical Digital Interface)
a. True
b. False

10._____ To install a shared printer on a remote computer, you can (1) Use the Devices and
Printers window or
a. use File Explorer or Windows Explorer.
b. On the printer's Properties box
c. On a remote computer
d. Windows Security box
 REMEMBER
Key Points

General procedures to install any peripheral device:

1. Read the manufacturer's directions.

2. Make sure the drivers provided with the device are written for the operating system (OS) you
are using
3. Make sure the motherboard port you are using is enabled.
4. Install drivers or plug in the device
5. Install the application software to use the device.

Most common peripheral devices you might be called on to install:

• Plug a mouse or keyboard into a USB port and Windows should immediately recognize it and
install generic drivers.
• A digital camera or camcorder can hold images
• Install the memory card in the computer.
• A webcam (web camera) is embedded in most laptops and can also be installed as a
peripheral device using a USB port or some other port.
• A printer connects to a single computer or to the network.

Follow these steps to install a wired or Wi-Fi network printer, serial-port printer, or Bluetooth printer in
Windows:

1. Make sure the printer is connected to the network or the computer.

2. Select the printer and click Next.
3. In the next box, select the brand and model printer to use the drivers kept by Windows.
4. Continue to follow the wizard to install the printer.

Connecting a wired printer (USB or Ethernet) is easy:

-- USB. Plug the USB cable into the printer and computer and Windows installs the printer
automatically.

-- Serial. For a printer with a serial port, plug the serial cable into the printer and computer and install
the printer as a local printer.

-- Ethernet. Plug the Ethernet cable into the printer and network wall jack, switch, or router and install
the printer as a network printer on any computer on the network.

-- Bluetooth. For a Bluetooth printer, which is installed as a local printer, turn on Bluetooth in
Windows, move the printer within range of the computer, and watch as the two Bluetooth devices
pair up.

-- Wi-Fi
ad hoc network. For a Wi-Fi printer, you can connect the printer and computer directly to
each other in a Wi-Fi Ad Hoc Mode network.

-- Wi-Fi infrastructure network. In infrastructure mode, Wi-Fi devices connect to a Wi-Fi access
point, such as a SOHO router.
 TRY
Let’s see how much you have learned today!
(Answer on the Learner’s Activity and Assessment sheets.)
Test I-Directions: Fill in the blank. Read the questions below and provide the correct answer in the
space provided.
1. For a printer with a serial port, plug the ________ into the printer and computer and install the
printer as a local printer.
2. Plug the USB cable into the printer and computer and Windows installs the _______
automatically.
3. Plug a mouse or keyboard into a USB port and Windows should immediately recognize it and
install generic________.
4. Plug the Ethernet cable into the printer and network wall jack, switch, or router and install the
printer as a network printer on any computer on the _________.
5. For a Bluetooth printer, which is installed as a local printer, turn on _________ in Windows, move
the printer within range of the computer, and watch as the two Bluetooth devices pair up.

Test II – Directions: Modified True or False. Write T if the statement is True and supply the correct
answer if the statement is false on the space provided.

_____1. Other output - (KVM, Touch Screen, Musical Instrument Digital Interface)
_____2. Other Input Devices- (Game controllers, Digitizer, Motion sensor, Touch Pad, Smart Card,
Digital camera, Microphone, Webcam).
_____3. Mouse - An input device that enters data with letters, numbers, symbols, and special function
keys.
_____4. Recall that 64-bit drivers are required for a 32-bit operating system, and 32-bit drivers are
required for a 32-bit OS.
_____5. Some devices, such as a USB printer, require that you plug in the device before installing the
drivers, and some devices require you to install the drivers before plugging in the device.
_____6. MIDI stands for (musical Instruction digital interface).
_____7. A MIDI port is a 5-pin DIN port that looks like a PS/2 keyboard port, only larger.
_____8. A touch screen is an input device that uses a monitor or LCD panel as the backdrop for input
options.
_____9. A KVM (Keyboard, Voltage, and Mouse) switch allows you to use one keyboard, monitor, and
mouse for multiple computers.
_____10. A local printer can be attached to a computer using a port (for example, USB, serial, or
wireless) on the computer.

Test III: Enumeration

Directions: Enumerate the following.

A. Give at least 5 common input and output peripheral devices.

1._________________
2._________________
3._________________
4._________________
5._________________

B. Give at least 5 common output peripheral devices.

1._________________
2._________________
3._________________
4._________________
5._________________
 • https://www.examcollection.com/certification-training/a-plus-install-configure-computer-
peripheral-devices.htmlThadani, Rahul (September 6, 2010). "Windows 7 System
Requirements". Buzzle. Archived from the original on July 6, 2017. Retrieved February
27, 2014.
REFERENCE/S
• https://www.ockelcomputers.com/support/install-drivers-using-device-manager/
• https://quizlet.com/178127698/112-install-and-configure-common-peripheral-devices-9-
19-flash-cards/

This learning resource contains copyrighted materials. The use of which

has not been specifically authorized by the copyright owner. We are
developing this CapSLET in our efforts to provide printed and e-copy learning
DISCLAIMER: resources available for the learners in reference to the learning continuity plan
of this region at this time of the pandemic.
This material is not intended for uploading or for commercial use but purely
for educational purposes and for the utilization of Zamboanga City Division only.

Developed by: ELMER S. NATIVIDAD, CpE

Secondary School Teacher I
Manicahan National High School
 CapSLET
Learner’s Activity and Assessment Sheets

SUBJECT
NAME
YEAR AND SECTION
TEACHER’S NAME

SAQ 1: How do I install device drivers?

What is Digestion?
_________________________________________________________________________
_________________________________________________________________________

SAQ 2: How do I connect peripheral devices to my computer?

_________________________________________________________________________
_________________________________________________________________________
What is Digestion?
Let’s Practice!

Directions: Write the letter of the correct answer on the blank.

1. _____ An electronic device that generates a digital representation of an image for data input to a
computer
a. Touch Screen
b. KVM
c. Musical Digital Interface
d. Scanner

2. _____ Authenticates a person's identity by translating a personal characteristic into a digital code
that is compared with a digital code in a computer: Fingerprint, Face, & Retinal.
a. Biometric Device
b. KVM
c. Musical Digital Interface
d. Scanner
3. ______ Devices that enable the computer to give the user the results of the processed data;
Printer, Speaker, & Display
a. Touch Screen
b. Output Devices
c. Musical Digital Interface
d. Scanner
4. _______
a. Biometric Device
b. KVM
c. Musical Digital Interface
d. Scanner
5. ______ Wireless; Blue-tooth; wired - USB, PS2
a. Biometric Device
b. Keyboard
c. Mouse
d. Scanner

6. ______ An input device that enters data with letters, numbers, symbols, and special function
keys. (Wireless, Wired - USB, PS2)

a. Scanner
b. Barcode Reader
c. Output Devices
d. Keyboard
7. _____ Keyboard - An input device that reads barcodes. (Wired - USB, Blue Tooth)
a. True
b. False
 8. _____ Other Input Devices- (Game controllers, Digitizer, Motion sensor, Touch Pad, Smart
Card, Digital camera, Microphone, Webcam)
a. True
b. False
9. _____ Other Input- (KVM, Touch Screen, Musical Digital Interface)
a. True
b. False

10._____ To install a shared printer on a remote computer, you can (1) Use the Devices and
Printers window or
a. use File Explorer or Windows Explorer.
b. On the printer's Properties box
c. On a remote computer
d. Windows Security box

TRY
Let’s see how much you have learned today!
Test I-Directions: Fill in the blank. Read the questions below and provide the correct answer in the
space provided.
1. For a printer with a serial port, plug the ________ into the printer and computer and install the
printer as a local printer.
2. Plug the USB cable into the printer and computer and Windows installs the _______
automatically.
3. Plug a mouse or keyboard into a USB port and Windows should immediately recognize it and
install generic________.
4. Plug the Ethernet cable into the printer and network wall jack, switch, or router and install the
printer as a network printer on any computer on the _________.
5. For a Bluetooth printer, which is installed as a local printer, turn on _________ in Windows, move
the printer within range of the computer, and watch as the two Bluetooth devices pair up.
Test II – Directions: Modified True or False. Write T if the statement is True and supply the correct
answer if the statement is false on the space provided.
_____1. Other output - (KVM, Touch Screen, Musical Instrument Digital Interface)
_____2. Other Input Devices- (Game controllers, Digitizer, Motion sensor, Touch Pad, Smart Card,
Digital camera, Microphone, Webcam).
_____3. Mouse - An input device that enters data with letters, numbers, symbols, and special function
keys.
_____4. Recall that 64-bit drivers are required for a 32-bit operating system, and 32-bit drivers are
required for a 32-bit OS.
_____5. Some devices, such as a USB printer, require that you plug in the device before installing the
drivers, and some devices require you to install the drivers before plugging in the device.
_____6. MIDI stands for (musical Instruction digital interface).
_____7. A MIDI port is a 5-pin DIN port that looks like a PS/2 keyboard port, only larger.
_____8. A touch screen is an input device that uses a monitor or LCD panel as the backdrop for input
options.
_____9. A KVM (Keyboard, Voltage, and Mouse) switch allows you to use one keyboard, monitor, and
mouse for multiple computers.
_____10. A local printer can be attached to a computer using a port (for example, USB, serial, or
wireless) on the computer.
Test III: Enumeration
Directions: Enumerate the following.
A. Give at least 5 common input and output peripheral devices.
1._________________
2._________________
3._________________
4._________________
5._________________
B. Give at least 5 common output peripheral devices.
1._________________
2._________________
3._________________
4._________________
5._________________
 Topic: INSTALLING AND CONFIGURING COMPUTER SYSTEMS (ICCS)
Learning Competency: LO 3. Install operating system and drivers for peripherals/ devices

ANSWER KEY
Let’s Practice! LET’S PRATICE
SAQ1: Install drivers using Device Manager 1. D 2. A. 3. B 4. C 5. C 6. D 7. B 8. A 9. B 10. A
1. 1. Press Windows key + X. TRY
2. 2.. Click Device Manager. Test I: Fill in the blank:
1. serial cable 2. Printer 3. Drivers 4. Network 5. Bluetooth
3. 3.Once device manager is open, select the device, Test II: Modified True or False
right click it and click Update Driver Software. This 1.input 2. T 3. T 4. 64 5. T
will launch the update driver software wizard, which 6. instrument 7. T 8. T 9. Video 10. T
presents two options:
4. SAQ2: Peripheral devices can be connected to Test III: Enumeration
your computer via USB port, serial port, parallel port, A. Keyboard, Mouse, USB flash drive
specialized network card, or Ethernet network. Local area Game controllers, Digitizer, Motion sensor
networks (LANs) commonly use Ethernet networks for Touch Pad, Smart Card, Digital camera
machine connection.
Microphone, Webcam
5. SAQ3. An SPB peripheral device driver controls B. Printer, Display, scanner,
a peripheral device that is connected to a
simple peripheral bus (SPB). ... Starting with Windows 8,
Windows provides driver support for peripheral devices
on simple peripheral buses (SPBs)
 Republic of the Philippines
Department of Education

EVALUATION TOOL FOR CONTENT AND LAYOUT & DESIGN

CAPSULIZED SELF-LEARNING EMPOWERMENT TOOLKIT (CapSLET)

Learning Area: TVL ICT-CSS Grade Level: 11

Title: INSTALLING AND CONFIGURING COMPUTER SYSTEMS
Quarter: 2
Week: 5
Learning Competency: Install drivers for peripherals/ devices of Windows 7 and 10.

Instructions:

1. Read carefully the learning resource (LR) page by page to evaluate the LR for compliance to standards
indicated in the criterion items under each factor below.
2. Put a check mark (/) in the appropriate column beside each criterion item. If your answer is NO, cite
specific page/s, briefly indicate the errors found, and give your recommendations in the attached Summary
of Findings form.
3. Write Not Applicable (NA) for criterion items that does not apply in the LR evaluated.

Standards /Criterion Items Yes No

CONTENT
Factor I. Intellectual Property Rights Compliance
1. The learning resource has no copyright violations. ✓
2. The copyrighted texts and visuals used in the LR are ✓
cited.
3. The copyrighted materials used in the LR are accurately ✓
cited.
4. The references are properly cited in the Reference/s box ✓
using the DepEd LR Referencing Guide.
Note: At least 3 criterion items must be marked YES to Complied Not
indicate compliance to this factor. Complied
4
Factor II. Learning Competencies
1. Content is consistent with the targeted DepEd Most ✓
Essential Learning Competencies (MELCs) intended for
the learning area and grade level.
2. The MELC is subtasked into learning objectives based ✓
on the Compressed Curriculum Guide Syllabus (CCGS)
of a specific learning area.

Note: These 2 criterion items must be marked YES to Complied Not

indicate compliance to this factor. Complied
2
Factor III. Instructional Design and Organization
1. The LR contributes to the achievement of specific ✓
objectives of the learning area and grade level for which
it is intended.
2. Sequencing of contents and activities from ✓
UNDERSTAND, REMEMBER and TRY within each
lesson facilitates achievement of objectives.
3. Content is suitable to the target learner’s level of ✓
development, needs, and experience.
4. Content reinforces, enriches, and / or leads to the ✓
mastery of the targeted learning competencies intended
for the learning area and grade level.
5. The LR develops higher cognitive skills (e.g., critical ✓
thinking skills, creativity, learning by doing, problem
solving) and 21st century skills.
6. The LR enhances the development of desirable values ✓
and traits such as: (Mark the appropriate box with an
“X” applicable for values and traits only)
✓

Note: At least 5 criterion items must be marked YES to Complied Not

indicate compliance to this factor. Complied
7
Factor IV. Instructional Quality
1. Content and information are accurate. ✓
2. Content and information are up-to-date. ✓
3. The LR is free from any social content violations. ✓
4. The LR is free from factual errors. ✓
5. The LR is free from computational errors (if applicable) ✓
6. The LR is free from grammatical errors. ✓
7. The LR is free from typographical errors. ✓
Note: At least 6 criterion items must be marked YES to Complied Not
indicate compliance to this factor. Complied
7
Factor V. Assessment
1. The LR provides useful measures and information that ✓
help the teacher evaluate learner’s progress in mastering
the target competencies.
2. Assessment aligns with the learning competency/ies. ✓

3. Assessment provides clear instructions in the TRY ✓

section.
4. Assessment provides correct answer/s. ✓
Note: All criterion items must be marked YES to indicate Complied Not
compliance to this factor. Complied
4
Factor VI. Readability
1. Vocabulary level is adapted to target users’ experience ✓
and understanding.
2. Length of sentences is suited to the comprehension level ✓
of the target user.
3. Sentences and paragraph structures are varied and ✓
appropriate to the target user.
4. Lessons, instructions, exercises, questions, and activities ✓
are clear to the target user.
5. The LR provides appropriate mother tongue for the ✓
target user.
Note: At least 4 criterion items must be marked YES to Complied Not
indicate compliance to this factor Complied
5
LAYOUT AND DESIGN
Factor I. Physical Attributes
1. All necessary elements are complete. ✓
2. Cover elements are correct and complete. (i.e., w/ grade ✓
indicator & learning area, CapsLET title, quarter,
headings, division tagline)
3. The CapsLET follows the prescribed learning area color. ✓
4. The LR observes correct pagination. ✓
5. Contains accurate learning competency and code. ✓
Note: All criterion items must be marked YES to indicate Complied Not
compliance to this factor Complied
5
Factor II. Layout and Design
1. The LR follows the prescribed CapsLET template. ✓
(maximum of 10 pages and minimum of 3 pages)
2. The LR follows the prescribed CapsLET paper size ✓
(long bond paper - 21.59cm x 33.02cm).
Note: All items be marked YES to indicate compliance to this Complied Not
factor. Complied

2
Factor III. Typographical Organization
1. The LR uses appropriate font size (12 or 14) and styles ✓
(Calibri Body, Arial or Times New Roman).
2. The LR follows the rules in the use of boldface and ✓
italics.
Note: All criterion items must be YES to indicate compliance Complied Not
to this factor. Complied
2
Factor IV. Visuals
1. It contains visuals that illustrate and clarify the concept. ✓
2. It has images that are easily recognizable. ✓
3. Layout is appropriate to the child. ✓
4. Text and visuals are properly placed. ✓
Note: All criterion items must be marked YES to indicate Complied Not
compliance to this factor. Complied
4
Recommendation: (Please put a check mark (/) in the appropriate box.)

Minor revision. This material is found compliant to the minimum requirements in all six factors. Revision based
on the recommendations included in the Summary of Content Findings form and LR with marginal notes must be
implemented.

Major revision. This material is non-compliant to the requirements in one or more factors. Revision based on the
recommendations included in the Summary of Content Findings form and LR with marginal notes must be
implemented.

For field validation. This material is found compliant to all factors with NO corrections.

I certify that this evaluation report and the recommendation(s) in the summary report are my own and have been
made without any undue influence from others.

Name/s Signature/s
Evaluator/s: JUL-AMBRI B. MADJID ________________________

VILMA V. FANTILAGAN ________________________

DR. LAARNI V. MIRANDA ________________________

Date accomplished: January 04, 2021

Note:
This tool is anchored on the Guidelines in ADM Content Evaluation, Guidelines in ADM
Layout Evaluation and Level 2 DepEd Evaluation Rating Sheet for 2 DepEd Evaluation Rating
Sheet for Story Books and Big Books.
.
 Summary of Content Findings, Corrections and Review for Locally Developed
CapSLET

Title of the CapSLET: TVL ICT-CSS Grade Level: 11

Quarter: 2
Week: 5
Part of the Brief Specific Put a check mark
CapSLET/ descriptio recommendati
Paragraph n of ons for
/ Line / Errors/ improving the
Page Findings/ identified Not
number (in Observatio criterion Implement
Implement
chronologi ns ed
ed
cal order)

Legend: (Type of Error) C - Content, L – Language, DL – Design and Layout

Other Findings: Write additional comments and recommendations not captured

in the evaluation tools used.

Prepared by: Date accomplished:

ELMER S. NATIVIDAD January 04, 2021

(Signature Over Printed Name)