Division of City Schools

Ramon Magsaysay High School

Manila
Technology and Livelihood Education
VOCATIONAL DEPARTMENT
ICT – COMPUTER SYSTEM SERVICING – GRADE 10
2nd Periodical Test
TEST SCORE
Name: ____________________________________
Grade 10 Section: ____________________________ Teacher: ____________________________
Test I – Multiple Choice
Direction: Choose the letter of the best answer.
1. What is CMD?
a. command software b. command prompt c. formatting files d. instruction

2. What does booting mean?

a. to restart the system unit b. to reset the system unit
c. to turn off the system unit d. to load or start up operating system

3. What is a user agreement?

a. It is an end-user license agreement b. It is a service displayed to guide the user
c. It is a software application given to individual user d. It is a software utility agreement for the user

4. What is the equivalent of 1gb to mb?

a. 10mb b. 100mb c. 1000mb d. 10000mb

5. What device is used to convert AC into DC?

a. CPU b. RAM c. System Unit d. Power Supply

6. Why do we need a bootable USB flash drive?

a. Available and cheaper b. Popular to use USB flash drive

c. Portable and easy to use without the need for computer d. None of the above

7. Where do we typically install the operating system?

a. Internal Hard Drive b. DVD c. External Drive d. Floppy Drive

8. If you were asked about SATA, what does SATA mean?

a. Serial Advanced Technology Attachment b. Serial Advocacy Technology Attachment
c. Social Advanced Technology Attachment d. Social Advocacy Technology Attachment

9. What is the shortcut name for the Command Prompt?

a. Bootsect/nt60d: b. CMD c. Diskpart d. Format fs=fat32

10. What do you call the test and diagnosing hardware?

a. diagnostic test b. BIOS c. installer d. POST

11. What do you call the main circuit board of a computer?

a. Chassis b. Expansion Card c. Motherboard d. System Unit

12. This button allows you to restore the size of the window.
a. Close b. Maximize c. Minimize d. Shutdown

13. It is a button in window used to end an activity in that window.

a. Close b. Maximize c. Minimize d. Shutdown

14. This is an interface connecting port for the computer speaker.

a. Audio port b. Microphone port c. USB port d. VGA port

15. It is an ethernet port for connecting the computer to the internet.

1|Page
 a. HDMI port b. LAN port c. USB port d. VGA port

16. It is a high-definition port for video connection on the computer.

a. HDMI port b. LAN port c. USB port d. VGA port

17. What do you call the series of beeps that indicates an error condition?
a. System error b. beep codes c. system d. disk error

18. What do you call the most important program that runs on a computer?
a. Operating System b. MS Word c. Application Software d. Utility Software

19. It is the common connecting port for keyboard, printer, flash disk, mouse, etc.
a. HDMI port b. LAN port c. USB port d. VGA port

20. Which program allows you to use more than one program to run concurrently?
a. multi-tasking b. Multi user c. Multithreading d. multi-processing

21. This is an operating system default command line interpreter which is cmd.exe.
a. Command prompt b. Computer icon c. Device manager d. Search box

22. What do you call the main part of a microcomputer, sometimes called the chassis?
a. CPU b. System Unit c. Memory d. Expansion Card

23. What is the name of the peripheral port that has a 15-pins for the computer monitor?
a. HDMI port b. LAN port c. Serial port d. VGA port

24. What do you call the test that happens when you turned on your computer?
a. Bios b. Chipset c. Diagnostic Test d. POST

25. What do you call a small portable disk drive that is usually used for backing up files?
a. Flash Drive b. Floppy disk drive c. Hard disk drive d. Zip drive

26. What card is inserted in a computer system unit and work for the visual output of computer?
a. Adapter card b. Audio card c. LAN card d. Video card

27. Which among the following programs allow two or more users to run programs at the same time?
a. Multi user b. Single user c. System software d. Utility software

28. What startup disk that contains special files required for the computer to start as an operating system?
a. Back up disk b. Bootable disk c. Flash disk d. Video disk

29. What is the archive file that contains an identical copy (or image) of data found on an optical disc, like a CD or DVD?
a. Booting b. Device c. Installer d. ISO Image

30. The name ISO was taken from the name of the file system used by the optical media. From which ISO does it belong?
A. ISO 9000 B. ISO 9001 C. ISO 19011 D. ISO 9660

31. A part of the system that has the ability to view and make a change in system settings on hardware and software.
a. Device Manager b. Computer Icon c. Peripheral d. Control Panel

32. You were assigned to connect a printer to the computer, which port in the computer should you connect the cable?
a. Audio port b. VGA port c. LAN port d. USB port

33. As a student of ICT CSS your competency is to prepare a bootable flash disk, which port in the computer should you
use to do it?
a. The Lan port b. The Sound port c. The USB port d. The Video port

34. We use wireless networking technology that uses radio waves to send signals to users of high-speed internet, this is
called _______.
a. Internet service b. Private network c. Virtual connection d. Wi-Fi

35. What is one of the basic skills that you must acquire in computer hardware servicing is to independently or simply
setting up a PC?
a. Assembly and Disassembly b. Installing
2|Page
 c. Connecting files d. Operating System

36. A program that is no longer supported by its vendor because it is out of date and not compatible with the latest
operating system.
a. New device b. Outdated software c. Unknown device d. Update device

37. During software installation, the process that deletes the data in the hard disk, flash disk, etc. in order to prepare the
partition of the device.
a. Align b. Format c. Layout d. View

38. This image is an archive file of an optical disc (CD or DVD) which contain disk image of data contents in every sector
of the optical disk, it is called ____.
a. ISA b. ISO c. ISP d. ISQ

39. An activity in a computer wherein the program will not continue or failure to respond and we intend to redo the
particular work, this procedure is called _____.
a. Maximize b. Minimize c. Restart d. Shutdown

40. What type of utility software that will help you format and create bootable USB drives, USB keys, pen drives,
memory sticks, etc. needed to create USB installation media from bootable ISOs (Windows, Linux, UEFI)?
a. Application software b. Rufus software c. OS software d. Utility software

TEST II - FIND THE MISSING WORD IN THE BLANK TO COMPLETE THE PROCEDURE. Write the letters
only in the given space in each number.

RUFUS
Connect the USB flashdrive at the back panel USB port of the 41)_________. Look for the
42)_________ application and right click and open it. On the device dropdown list, select the USB
flashdrive you are 43)_________. Click the choose image button and browse for the location of the
image installer (ISO image) and select it. After the ISO image of the installer is selected, click the
44)_________ button to start the process a bootable. The progress bar will show how many percent
of the process is completed and once it reaches 45)_________ it will stop and you can click the close
button.

41. A. Back panel B. Computer C. Device D. Flash drive

42. A. CMD B. PowerISO C. Rufus D. Yumi
43. A. Creating B. Showing C. Studying D. Using
44. A. Erase B. Proceed C. Start D. Stop
45. A. 70% B. 80% C. 90% D. 100%

 CMD
In creating the bootable device of OS Installer using CMD, open the CMD and kindly type
the following command:

 Type 46. _________

 Type LIST DISK
 Type the SELECT DISK 1
 Type 47. _________
 Type CREATE PARTITION 48. _________
 Type SELECT PARTITION 49. _________
 Type FORMAT FS=NTFS QUICK
 Type ACTIVE, 50._________, EXIT
 Type the Copy file command

46. A. CMD B. DISKPART C. LIST DISK D. SELECT

47. A. ASSIGN B. CLEAN C. EXIT D. PARTITION
48. A. BOOTABLE B. DISK C. CREATE D. PRIMARY
49. A. 0 B. 1 C. 3 D. 5
50. A. ASSIGN B. DISK C. USE D. WORK

3|Page
Test III – Matching Type
Direction: Identify the PC Ports and connectors on column A, then choose the correct name of the ports in
column B, write the letter after the item numbers at the left.
A B

51 ____ A USB Type B

52 _____ B USB Micro B

C
53 _____ DVI Port

D
54_____ Ethernet Port

E
55 _____ IEC Power Connector

56 _____ F PS/2 Port (Mouse and Keyboard)

57 _____ G Audio Ports (Mic / Speaker/ Aux)

58 ____ H USB Type A

59 ____ I HDMI Port

60 ____ J VGA Port (Monitor)

4|Page
Blessed are the pure in heart, for they will see God. - Matthew 5:8

KEY TO CORRECTION

1 B 16 A 31 D 46 A
2 D 17 B 32 D 47 B
3 A 18 A 33 C 48 D
4 D 19 C 34 D 49 B
5 D 20 A 35 A 50 A
6 C 21 A 36 B 51 F
7 A 22 B 37 B 52 J
8 A 23 D 38 B 53 A
9 B 24 D 39 C 54 B
10 D 25 A 40 B 55 H
11 C 26 D 41 D 56 I
12 B 27 A 42 C 57 D
13 A 28 B 43 D 58 C
14 A 29 D 44 C 59 E
15 B 30 D 45 A 60 G

5|Page