1st Quarter Exam CSS
1st Quarter Exam CSS
A C
B D
A. B. C. D.
35. What is the first thing you do before starting computer disassembly?
A. Make sure you have the tools you need and they're all close by
and handy and be sure to have a container to keep the screws in so you have
them when you want to put things back together.
B. The first thing to do is unplug every wire coming from the power
supply.
C. Unplug every cable that is plugged in to your computer.
D. Unscrew the four screws at the back of the computer.
36. What is the last component to be removed in computer disassembly?
A. Power Supply Unit B. Motherboard C. Hard disk D. RAM
37. Which of the components inside the system unit is having heat sink and fan
on top to
make sure it is properly ventilated? A. Optical Drive B.
Motherboard C. RAM
D. CPU
38. Which of components inside the system unit has the most number of
wires/cables on?
A. Power Supply Unit B. Motherboard C. Hard disk D. RAM
39. As an inspiring computer technician, you are aware of the danger of ESD
towards computer components. What is the best way to prevent the build-
up of static electricity to protect your computer components?
A. I will ground myself every five minutes, by touching grounded (Sink
faucet / pipe, wire coming from the ground part of a wall outlet)
B. I will disassemble in an air-conditioned room because the static
electricity is slow in build-up in cool places.
C. I will call a friend who is best in disassembling.
D. I will use ESD tools.
40. What is the reason why the carpet is better than tile for work space?
A. Because tile is harder, it may deform components when drop.
B. Because screws and other small parts will roll around.
C. Because this has been the routine ever since.
D. Because you might slip while working in tiles.
41. Organize the step-by-step procedure in computer disassembly?
1. Detaching the Hard Drive 2. Detaching the power supply 3. Opening the
outer shell / case 4. Pull Out the Motherboard 5. Removing the CD / DVD
Drives 6. Removing the CPU fan 7. Removing the system fan 8. Unplugging
all the cables and wire 9. Removing RAM
A. 8, 3, 7, 6, 2, 5, 1, 9, 4 B. 8, 3, 7, 6, 2, 5, 9, 1, 4
C. 1, 3, 4, 2, 8, 6, 5, 9, 7 D. 8, 3, 7, 6, 9, 2, 5, 1, 4
42. In computer disassembly, there are lots of screws to be removed, every
component contains two or more screws. What will be your action to prevent the
screws mix with each other? A. I will remember every screw from each
component B. I will use screw
organizer
C. I will work with assistant D. Label every screw
43. What is the first thing you do before starting computer assembly?
A. Take an inventory of your parts B. Prepare Grounding Protection
C. Building a PC takes up space D. Have the Drivers Ready
44. What is the first component to put inside the system unit in computer
assembly?
A. Power Supply Unit B. Mother board C. Hard disk D. RAM
45. Which component is illustrated in this procedure: Insert them into the proper
sockets and push down firmly but evenly until the clips on both sides of the
socket pop into place.\
A. Mother board B. Optical Drive C.RAM D. CPU
46. What component is missing in the figure bellow except from optical drive?
A. Power Supply
B. System Unit
C. Hard disk
D. CPU
Prepared by: