DIVISION UNIFIED TEST

TLE 10 ICT
THIRD QUARTER
DIRECTIONS: Read and understand each question carefully. Choose the best answer and
write it on a separate sheet.

6. A system set up or the assortment of

1. This refers to the policy that an ICT
components that make up the system.
student follows when working in the
What do you call this?
computer laboratory.
A. BIOS
A. Occupational Health and Safeties
B. Configuration
(OHS) Policy
C. System memory
B. Occupational Health and Safety
D. Windows setup
(OHS) Policy
C. Opportunity Health and Security
7. What software is stored on a small
(OHS) Policy
memory chip on the motherboard.
D. Opportunity Healthy and Security
A. BIOS
Policy (OHS)
B. Configuration
C. External hard drive
2. It uses continuous variables for
D. Flash drive
mathematical operations
and utilizes mechanical or electrical 8. Which of these instructs the computer on
energy. how to perform a number of basic
A. Analog computers functions such as booting and keyboard
B. Digital computer control.
C. Hybrid computer A. BIOS
D. Laptop B. Defrag
C. Disk Cleanup
3. Which of these digital circuits are D. System tray
designed to operate on two states, namely
bits 0 and 1. 9. It is where the BIOS is accessed and
A. Analog computer configured.
B. Digital computer A. BIOS defrag
C. Hybrid computer B. BIOS metrics
D. Smartphones C. BIOS setup utility
D. BIOS system tray
4. These are computers designed to provide
services to client machines in a computer 10. These are small software programs that
network. help the operating system use the device.
A. Micro computer A. BIOS
B. Mini computer B. CPU
C. Servers C. Defrag
D. Supercomputers D. Drivers

5. Which tool is used to test and diagnose an

equipment?
A. Diagnostic tools
B. Digital multimeter tools
C. Loopback adapter tools
D. Toner probe tools 11. It tests the basic functionality
of computer ports.
 A. Diagnostic tools A. Diskette-drive and hard-disk drive
B. Digital multimeter access incident
C. Loopback adapter B. Diskette-drive and hard-disk drive
D. Toner probe access indicators
C. Diskette-ware and hard-disk drive
12. Which command-line tool creates and access indicators
deletes partitions on a hard D. Light-drive and hard-disk drive access
drive. indicators
A. Disk Management tool
B. FDISK 19. What part is connected to a cable at
C. Format one end using specific adapters, such as
D. ScanDisk an RJ-45, coaxial, or metal clips.
A. Adapter
13. This tool initializes disks, creates B. LED
partitions, and formats partitions. C. Probe Part
A. Disk Management tool D. Toner Part
B. Format tool
C. ScanDisk tool 20. What tool tests the integrity of circuits and
D. ScanDisk tool the quality of electricity in computer
components.
14. What do you call a series of beeps that A. Diagnostic tools
indicates an error condition. B. Digital multimeter
A. Beep codes C. Loopback adapter
B. Beeps signal D. Toner probe
C. Error codes
D. System error message 21. What are the advantages of using
mainframe computers in large
15. It optimizes space on a hard drive to allow organizations?
faster access to programs A. It can perform calculation-intensive
and data. tasks
A. Defrag B. It can process highly critical
B. Disk cleanup applications
C. ScanDisk C. It can provide services to client
D. System file checker machines in a computer network
D. It can serve client requests and
16. These messages can indicate problems or allocate resources
provide status information.
A. Beep codes 22. Why are servers designed to provide
B. Diskette-drive access indicators services to client machines in a
C. Hard-disk drive access indicators computer network?
D. System error messages A. The have parallel processing and
well-designed memory hierarchy
17. What part of the toner probe traces the B. These computers are a
cable? combination of both digital and
A. Adapter analog
B. Coaxial computers.
C. Probe Part C. They have larger storage capacities
D. Toner Part and powerful processors
D. They have the capacities to host
multiple operating systems
18. Which indicators light up in response to 23. How effective are supercomputers in
data being transferred to or from the studying quantum physics, mechanics,
drives.
 weather forecasting, and molecular 27. Why is it important to consider the
theory? computer processor for applications like
A. It can operate as a video editing?
number of virtual machines and can A. Basic design and complexity is best for
substitute for several small servers video editing
B. It can perform high calculation- B. Cache stored instruction is good for
intensive tasks video editors
C. It provides services to client C. Clock speed and architecture is best
machines in a computer network for videos
D. It uses digital circuits and are D. Higher processor speed is highly
designed to operate on two required for video editing
states, namely bits 0 and 1
28. How important is a high RAM in a
24. Justify the reasons of using the computer?
Occupational Safety and Health (OSH) in A. Faster microprocessor performance for
safety policies and procedure. higher RAM
A. An (ICT) student should know how B. More cache means better computer
to behave when working performance
in the computer laboratory C. More RAM means sufficient for
B. Identify the hazards in working and handling the requirements of most
decide how dangerous they are as software applications
well and eliminate the hazard or D. The more RAM a computer has the
modify the risk that it presents faster and more
C. Safety practices should be learned effectively it will operate
early and always adheres in
working with any electrical and 29. Any form of modern computer graphics
electronic device system can now display high resolution
D. This is for your protection as well color images on a standard-sized display
as to the people working with you screen. Why is this so?
A. FSB speeds currently ranging from
25. What is the value of using Personal 533MHz up to 1600 MHz
Protective Equipment (PPE)? B. RAM tends to make them not just slow
A. To guard in general, but more annoyingly
their computers against the deadly intermittently sluggish
ravages of static electricity C. Some graphics processors are
B. To protect the wearer's body or simply more sophisticated than others
clothing from injury D. The more sophisticated graphics cards
C. To protect the wearer's clothing now determines how well
from stain a computer can handle the playback of
D. To protect the workers from high definition video, as well as the
pesticide application, pollution or speed and quality
infection from another worker
30. Why is system specification one of the
26. What will happen if the anti-static and most important considerations during
safety precautions are not followed? installation?
A. The equipment will be destroyed A. For a computer to run and work
B. The tools will be slippery properly
C. There will be a little shock experience B. For specification of software
when walking across a carpeted floor C. To calculate the amount needed
D. There will be excessive perspiration D. To determine how long the system will
last
31. What is the use of a cache? 35. Which statement is true?
A. Handle 3D graphics or to undertake a A. In buying a printer, it may require
significant volume of video editing or either Windows 97 or Mac OS IX
recording B. The performance of a computer
B. Measure of how fast a microprocessor depends on two factors: the
communicates with the computer's speed and architecture of its processor
main circuit board or memory
C. Store up instructions so that it has to C. The speed of a computer's processor
slow down as little as possible chip (technically known as its "clock
between tasks time") in measured in gigahertz (GHz)
D. To keep moving data to and D. When purchasing a software or
from their hard disks in order to keep hardware for a computer, one should
running first make sure that the computer
supports the system requirements
32. Which statement is relevant?
A. Adding a new graphics card to a 36. Predict what would happen if the disk
computer with onboard graphics is a management tools are not used correctly.
hard upgrade A. Data stored on a computer will be at
B. The CPU of a processor is the most risk
important factor to determine its B. Partitions will be deleted
performance, and refers to its basic C. The software programs will fail
design and complexity D. The system unit will lag
C. The performance of a computer
depends on one factor 37. What will happen if the Windows 7 boot
D. Two key factors determine the speed disk is used?
of traditional, spinning hard disks A. It clears space on a hard drive by
searching for files that can be
33. How would you explain the function of a safely deleted
RAM? B. It initializes disks, creates partitions,
A. RAM can currently be 4200, and formats partitions
5400, 7200, 10000 or 15000 rpm C. It repairs Windows system files,
(revolutions per minute) restores damaged or lost files, and
B. RAM can either be integrated into a reinstalls the operating system
computer's motherboard, or plugged D. It scans the operating
into the motherboard as a separate system critical files and replaces files
"video card" that are corrupted
C. The higher the measure of FSB the
better for overall performance of RAM 38. Identify the results if the probe is near
D. The more RAM a computer has the proximity to the cable to which the
faster and more effectively it will toner is attached.
operate A. The tone can be heard through a
speaker in the probe
34. What would result if the computer does B. The tone determine which
not have any USB ports? computer device is not functioning
A. Games will not run at all correctly
B. The printer drivers may be C. The tone displays the information on
incompatible with your operating an LCD or LED
system D. The tone tests the basic functionality
C. The user may not be able to use the of computer ports
software or hardware
D. The user will not be able to physically
connect the printer
39. What would happen if the System File
Checker (SFC) is used? 44. Why is it important to check the
A. It initializes disks and format partitions specification as important end to testing?
B. It optimizes space on a hard drive to A. To check the specification for the
allow faster access to programs installation to make sure that it has
C. It prepares a hard drive to store been met
information B. To know which passed and which
D. It scans the operating system critical failed
files and replaces files that are C. To make sure that the data is correct
corrupted D. To recognize when a test shows
problems or is successful
40. What is the best thing to do after
performing an external visual inspection? 45. Which is the correct first step in external
A. Boot the system visual inspection?
B. Debug the system A. Turn off the computer, and the
C. Observe the system peripherals
D. Scan the system B. Turn off the computer, the monitor, and
all peripherals
41. Identify the indications of system error C. Turn off the computer, the monitor, and
messages. except the peripherals
A. These message indicators light up in D. Turn on the AVR, the monitor, and all
response to data being transferred peripherals
B. These messages can indicate
problems or provide status information 46. Why is there a need to secure the captive
C. These messages troubleshoot the screws in the serial and parallel ports?
diskette drive or hard-disk drive A. To access the ports securely
subsystem as appropriate B. To connect it properly
D. These optimizes space on a hard drive C. To ensure a firm connection
to allow faster access to programs and D. To open it easily
data
47. Most of the steps in the boot routine
42. How does a Digital multimeter take many require observation of system functions
types of measurements? and indications. How will you complete all
A. It tests the basic functionality of these steps?
of computer ports A. Boot the system while updating
B. It tests the integrity of circuits and the B. Reboot the system once
quality of electricity in computer C. Reboot the system several times
components D. Update the system
C. It traces the cable
D. The adapter is specific to the port to be 48. What safety precautions would you
tested recommend before starting to work inside
the computer?
43. What is the correct sequence in the given A. Disconnect the power supply after
test procedures? removing the computer cover
1. Checking specification B. Disconnect the power supply cables
2. Gathering test information and remove the computer cover
3. Responding to test information C. Disconnect the
4. Validating the test information power supply from the power source
and the power supply cables from
A. 2, 4, 3, 1 the power supply
B. 1, 3, 2, 4 D. Remove the computer cover then
C. 4, 2, 1, 3 unplug the power source
D. 3, 2, 1, 4
49. Suppose the heat sink assembly gets
extremely hot during system operation.
What is the best thing to do?
A. Focus the electric fan on it
B. Give sufficient time to cool before
touching it
C. Put the heat sink in a cool place
D. Use hand gloves to hold it

50. What is the value of going through the test

procedures?
A. To allow faster access to programs
and data
B. To help you work more effectively and
to make sure you test everything that
needs testing
C. To identify which software to use in
different situations
D. To prepare a hard drive to store
information
 ANSWERS KEY

1. B
2. A
3. B
4. C
5. A
6. B
7. A
8. A
9. C
10. D
11. C
12. B
13. A
14. A
15. A
16. D
17. C
18. B
19. D
20. B
21. B
22. C
23. B
24. B
25. B
26. C
27. D
28. D
29. D
30. A
31. C
32. D
33. D
34. D
35. D
36. A
37. C
38. A
39. D
40. A
41. B
42. B
43. A
44. A
45. B
46. C
47. C
48. C
49. B
50. B