Department of education

Division of bohol
District of bien unido
Modesto g. autida high school
Pinamgo, bien unido,bohol

PERIODICAL TEST
Grade 8 TLE CSS– Quarter 3

Name: _________________________ Grade & Section: _______________ Date: ____________

I. Multiple Choice
Read the questions carefully and write the letter of the correct answer.
1. What is the main function of an anti-static wrist strap?
a. To prevent electric shock
b. To protect the technician from dust
c. To avoid static electricity damage
d. To enhance grip when handling components
2. Which tool is used to test the functionality of a power supply unit (PSU)?
a. Multimeter b. Screwdriver c. Crimping tool d. Soldering iron
3. What does BIOS stand for?
a. Basic Integrated Operating System
b. Basic Input Output System
c. Binary Input Output System
d. Basic Internal Operating System
4. Which type of memory is used for temporary storage while a computer is running?
a. RAM b. ROM c. Hard Drive d. SSD
5. What component is responsible for processing data in a computer?
a. RAM b. GPU c. CPU d. SSD
6. What is the function of the motherboard in a computer system? (1)
a) Stores data permanently
b) Provides a platform for the processor and other components
c) Powers the computer
d) Displays visual output
7. Which of the following is NOT an essential part of a computer system?
a) Monitor b) Printer c) CPU d) Keyboard
8. When troubleshooting a computer that is not turning on, which of the following should you check first?
a) The power supply b) The hard drive c) The RAM d) The motherboard
9. A technician wants to upgrade the storage of a computer. Which component should be upgraded?
a) RAM b) CPU c) Hard drive d) Monitor
10. Which of the following tools is commonly used to clean the inside of a computer case?
a) Vacuum cleaner b) Compressed air c) Water d) Wipes
11. What is the first step in assembling a computer system?(2)
a) Install the operating system
b) Install the CPU and motherboard into the case
c) Connect the power supply
d) Connect the monitor
12. When disassembling a computer system, which of the following components should be removed last?
a) Power supply b) RAM c) Hard drive d) CPU
13. Which of the following is an example of a storage device that can be used in a computer system?
a) RAM b) Hard Drive c) Monitor d) Keyboard
14. What is the purpose of the power supply unit (PSU) in a computer?
a) To store data for long-term use
b) To provide electrical power to the computer's components
c) To cool down the system
d) To convert digital data into analog signals
15. What should you do first when you encounter a “blue screen of death” error on a computer?
a) Reboot the system immediately
b) Check for hardware failure
c) Check for recent software installation or updates
d) Replace the motherboard
16. Which of the following is the main function of the motherboard in a computer? (6)
a) To store data
b) To control the flow of data between components
c) To process data
d) To provide power to the system
17. What does the CPU (Central Processing Unit) do in a computer system?
a) It stores data permanently
b) It controls peripheral devices
c) It processes instructions from programs
d) It manages the flow of electricity
 18. What type of memory is used to store data that is not lost when the computer is turned off?
a) RAM b) Cache memory c) ROM d) Virtual memory
19. What should you do first before installing any hardware component in a computer?
a) Connect the hardware to the power supply
b) Make sure the computer is powered off and unplugged
c) Open the operating system
d) Install the necessary drivers
20. Which of the following is a common cause of a computer not turning on?
a) A faulty CPU
b) Insufficient RAM
c) A disconnected power supply
d) A malfunctioning keyboard

II. True or False

Write T if the statement is true and F if it is false.

1. It is safe to work on a computer without shutting it down. __

2. The CPU is also known as the brain of the computer. __
3. SSDs are faster than HDDs in terms of data retrieval. __
4. A crimping tool is used to cut wires. __
5. BIOS settings can be modified to change boot sequence. __
(Continue with 5 more True/False statements.)
6. The CPU must be installed in the motherboard before the RAM is inserted. (2)
7. The operating system installation should be done before installing hardware components.
8. The computer should be powered off before disconnecting any internal components.
9. A hard disk is considered a volatile storage device.
10. Installing the drivers for the hardware components is the final step in configuring a system.
11. The CPU is responsible for executing instructions and performing calculations. (1)
12. It is okay to handle computer parts with bare hands, as long as you’re careful.
13. A mouse and keyboard are part of the input devices.
14. To troubleshoot a software issue, you should first check the physical components of the
computer.
15. The operating system is necessary for a computer to interact with hardware components

III. Identification
Identify the following terms based on the given description.

1. A tool used to tighten or loosen screws.

2. The component that stores permanent data in a computer.
3. The process of diagnosing and resolving computer issues.
4. A temporary storage that speeds up processing.
5. The full meaning of ICT.
(Continue with 5 more identification questions.)

IV. Practical Application (10 points)

Answer in 2-3 sentences.

1. Why is it important to observe safety precautions when handling computer hardware?

2. Describe the steps in installing an operating system.

Goodluck!
Table of Specifications (TOS)

Competency MC (20) T/F (10) ID (10) PA (10) Total Items

Safety Procedures 5 3 2 2 12
Hardware & Tools 5 3 3 2 13
Software Installation 5 2 2 3 12
Troubleshooting 5 2 3 3 13
Total 20 10 10 10 50

This test ensures that students have a strong grasp of fundamental CSS (Computer Systems Servicing)
concepts from weeks 1-5. Let me know if you'd like any modifications!
Periodical Test
TLE 8 – ICT (CSS)
Quarter 3: Week 1 – Week 5

Name: _________________________
Grade & Section: _______________
Date: ____________
Teacher: _______________

I. Multiple Choice (20 points)

Read the questions carefully and encircle the letter of the correct answer.

1. What is the main function of an anti-static wrist strap? a. To prevent electric shock
b. To protect the technician from dust
c. To avoid static electricity damage
d. To enhance grip when handling components
(Answer: c)
2. Which tool is used to test the functionality of a power supply unit (PSU)?
a. Multimeter
b. Screwdriver
c. Crimping tool
d. Soldering iron
(Answer: a)
3. What does BIOS stand for?
a. Basic Integrated Operating System
b. Basic Input Output System
c. Binary Input Output System
d. Basic Internal Operating System
(Answer: b)
4. Which type of memory is used for temporary storage while a computer is running?
a. RAM
b. ROM
c. Hard Drive
d. SSD
(Answer: a)
5. What component is responsible for processing data in a computer?
a. RAM
b. GPU
c. CPU
d. SSD
(Answer: c)

(Continue with 15 more multiple-choice questions covering safety procedures, hardware tools, software installation, troubleshooting, and
maintenance.)

II. True or False (10 points)

Write T if the statement is true and F if it is false.

1. It is safe to work on a computer without shutting it down. __ (F)

2. The CPU is also known as the brain of the computer. __ (T)
3. SSDs are faster than HDDs in terms of data retrieval. __ (T)
4. A crimping tool is used to cut wires. __ (F)
5. BIOS settings can be modified to change boot sequence. __ (T)
(Continue with 5 more True/False statements.)

III. Identification (10 points)

Identify the following terms based on the given description.

1. A tool used to tighten or loosen screws. (Screwdriver)

2. The component that stores permanent data in a computer. (Hard Drive/SSD)
3. The process of diagnosing and resolving computer issues. (Troubleshooting)
4. A temporary storage that speeds up processing. (RAM)
5. The full meaning of ICT. (Information and Communication Technology)
(Continue with 5 more identification questions.)

IV. Practical Application (10 points)

Answer in 2-3 sentences.

1. Why is it important to observe safety precautions when handling computer hardware?

(To prevent damage to components and ensure personal safety.)
2. Describe the steps in installing an operating system.
(Boot from installation media, format the drive, install OS files, configure settings.)
(Continue with 3 more application questions.)
Table of Specifications (TOS)

Competency MC (20) T/F (10) ID (10) PA (10) Total Items

Safety Procedures 5 3 2 2 12
Hardware & Tools 5 3 3 2 13
Software Installation 5 2 2 3 12
Troubleshooting 5 2 3 3 13
Total 20 10 10 10 50

This test ensures that students have a strong grasp of fundamental CSS (Computer Systems Servicing) concepts from weeks 1-5. Let me know if
you'd like any modifications!