Scribd
Upload
79 views

CSS Pre Assessment NC II: PC1 Windows 7 PC 2 Windows Server 2008 R2

This document outlines the steps for setting up a network with one Windows 7 PC and one Windows Server 2008 R2 PC. It involves: 1. Installing the operating systems on each PC from bootable flash drives. 2. Installing drivers and optional applications. 3. Creating cables and connecting the PCs to a router to establish a peer-to-peer network. 4. Configuring settings like workgroup name, sharing, and static IP addresses. 5. Expanding the network by setting up the Windows Server as a domain controller, file server, and other services with the Windows 7 PC and laptop joining the domain.

Uploaded by

ART DOLLOSA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
79 views

CSS Pre Assessment NC II: PC1 Windows 7 PC 2 Windows Server 2008 R2

This document outlines the steps for setting up a network with one Windows 7 PC and one Windows Server 2008 R2 PC. It involves: 1. Installing the operating systems on each PC from bootable flash drives. 2. Installing drivers and optional applications. 3. Creating cables and connecting the PCs to a router to establish a peer-to-peer network. 4. Configuring settings like workgroup name, sharing, and static IP addresses. 5. Expanding the network by setting up the Windows Server as a domain controller, file server, and other services with the Windows 7 PC and laptop joining the domain.

Uploaded by

ART DOLLOSA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 3

CSS Pre Assessment NC II

Name :_____________________________________________________Date:________________________

I. Disassemble and Reassemble System Unit


II. Installation of Windows 7 Enterprise KMS and Windows Server 2008 R2 Enterprise
Things needed
 Bootable flash drive Windows 7 and Windows Server 2008 R2
 Create bootable using Rufus program

PC 1 PC 2 Windows Server
Windows 7 2008 R2

Procedure #2 Installation of Operating System


Procedure #1 Installation of Operating System
 Insert flash drive to pc
 Insert flash drive to pc
 Go to BIOS configuration
 Go to BIOS configuration
 Set boot option or boot device Priority
 Set boot option or boot device Priority
 First boot : Flash drive
 First boot : Flash drive
 Second boot : Hard disk drive
 Second boot : Hard disk drive
 Save and exit
 Save and exit
 Press Enter when to boot the flash driver
 Press Enter when to boot the flash driver
 Partition
 Partition
 Install Windows Operating System Windows Server
 Install Windows Operating System Windows 7
2008 RS Enterprise
Enterprise
 Wait Until the installation finished
 Wait Until the installation finished
 Create Administrative password for windows server
 Type user don’t put user password protect
2008 R2

Procedure #3 Installation of Missing drivers using Driver Procedure #3-A Installation of Application Software’s
Pack Solution in both PC Optional it depends if the Assessor wants to install this
 Open driver pack solution installer applications
 Don’t update when ask  Microsoft Office 2010
 Click settings  Google chrome
 Click Expert Mode  Mozilla Firefox
 Select all missing drivers  Adobe reader
 Install  Yahoo messenger
 Wait until finish  Winrar
 Then check device manager  ETC...

III. Create 3 standard cables

PC 1 Windows 7
Router

Procedure #4 Router Configuration


 Connect PC to router
 Hard Reset router
 Open browser and type 192.168.3.1
 Click home and log in user :admin, password :admin
 Go to network settings
 Set router IP assigned by the Assessor eg, :192.168.40.1
 Set DHCP server starting IP eg,: 192.168.40.50 and ending IP : 192.168.40.150 assigned by the Assessor
 Set SSID and Password Security
 Save and exit
Router Internet/ISP
Peer to Peer Network

Switch hub

PC 1 PC 2 Windows
Windows 7 Server 2008 R2

Procedure #5 Peer to Peer network


 Connect all cables
 Change workgroup Name and Computer name
 Workgroup must be de same in both PC
 PC name must not de same both PC
 The computer will restart in changing PC name and workgroup name
 After restarting go to network
 Turn on network discovers and turn off password protects in Network Properties advance sharing settings.
 Check Network if both PC are available in the network if not wait 2 to 3 minutes for network discovery
 If both PC are already in the network
 Share local Disk Drive with security setting
 Create Folder on desktop in both PC inside the folder create WordPad with your Name, School, Date and
email account to print
 Try to open both PC in the network Share local Hard Disk Drive and Folder you’ve shared
 Configure Static IP in windows Server 2008 R2
 Check IP Configuration Window R, type cmd and enter type ipconfig
 On the given IP address, Subnet mask, and default gateway
 Type this to you network properties Internet protocol or TCP/IPV4 properties
 Click ok and close

Note: The Assessor will check your work if you are done

I. Computer name and Workgroup Name


II. Both computer are on the network
III. Share hard disk drive and folder can be open in both PC
IV. And static IP Address on Server and Client

IV. Set-up Computer Server


1. Active Directory Domain
2. DHCP
3. File Server
4. Folder Redirection
5. Print Sharing and Deploying ( Produce a Print out in both PC, Sever and Client)
6. Remote Desktop
7. Web Services
8. Connect Laptop to Domain Using Wireless Connection
V. Maintain and Repair Computer System/Network
VI: Server and Client Network

Router

Switch hub

PC 1 PC 2 Windows
Server 2008 R2 Laptop Windows 7
Windows 7

You might also like