CONFIGURE THE ACCESS POINT/ROUTER
Reset the router and take note of the following: Open a browser and enter 190.168.0.254.
Default IP address: 192.168.0.254 Type the username and password.
Username: admin
Password: admin
Select Access Point Change Wireless Network Name (SSID) and
password.
Disable DHCP Server and enter a new IP Click Reboot button
Address and Subnet Mask.
CONFIGURE SERVER/CLIENT IP ADDRESS
Right-click LAN card Properties Select TCP/IPv4 Properties
Enter the IP address, subnet mask, default Repeat the same procedure for the SERVER but
gateway and preferred DNS server. Click change the IP address (e.g. 132.0.0.3). This time the
Ok button to finish. preferred DNS server is not required.
Test the connection using the “ping” in the command
prompt.
Server (e.g. ping 130.0.0.3)
Client (e.g. ping 130.0.0.2)
INSTALL ACTIVE DIRECTORY DOMAIN SERVICES &
DNS SERVER
On the Start menu search box, The installation wizard will appear.
enter the dcpromo. Click Next.
The next window will appear. Click Next. Select Create a new domain in a new forest
Next.
Enter your desired domain Next. Select Window Server 2008 R2 Next.
Check the DNS server Next. A message box will appear.
Click Yes button.
Click the Next button. Enter a valid password Next.
The summary window will appear. Check the Reboot on completion.
Click Next.
CREATE ACTIVE DIRECTORY USERS AND COMPUTERS
From the Start button, locate the Right-click the domain name New
Administrative Tools Organizational Unit.
Active Directory Users and Computers.
Enter the Name of the organizational unit. Right-click on the blank space in the right pane
Uncheck the checkbox. New User.
Enter the name and user logon name Next. Enter a valid password, check User cannot
change password Next.
Click Finish button.
ADD ROLES TO SERVER
From the Server Manager, click the Roles Click Next button.
Add Roles.
Check the following and then click the Next button.
Remote Desktop Services
DHCP Server
Print and Document Services
File Services
1. REMOTE DESKTOP SERVICES
Click the Next button. Check the Remote Desktop Session Host Next
button.
Select Do not require Network Level
Click the Next button.
Authentication Next button.
Select Per User Next button. Click the Next button.
Click the Next button.
2. DHCP SERVER
Click Next button. Click Next button.
Enter the Preferred DNS server IPv4 address Select the WINS is required for applications on this
Validate Next button. network Next button.
Click Add… to add scopes. Fill-up the required fields.
Select Disable DHCPv6 stateless mode for this Click Next button.
server Next button.
3. PRINT AND DOCUMENT SERVICES
Click Next button. Check Print Server Next button.
4. FILE SERVICES
Click Next button. Check File Server Next button.
Click Install button. Wait until the installation is completed.
SHARE FOLDER AND JOIN DOMAIN
SERVER (Share Folder)
Right-click the Desktop New Folder Right-click the folder Properties Sharing
name the folder tab Share button
Select Find people from the drop-down. Enter the object name (Authenticated Users)
Check Names Ok button.
Right-click Authenticated Users Read/Write Select Everyone.
Right-click Everyone Read/Write Wait until Sharing Items processed.
CLIENT (Join Domain)
Right-click Computer Properties Click Change settings link.
Click Change button. Enter the Domain name Ok
Enter the domain username & password Ok Restart the computer.
button.
A welcome message box will appear.
GROUP POLICY MANAGEMENT
Go to Start Administrative Tools Group Go to the Forest Domain Domains
Policy Management. Domain Name.
Right-click the Domain Name Create a GPO Enter the Name of the GPO Ok button.
in this domain, and link it here.
Right-click the GPO Edit. Go to User Configuration Policies
Windows Settings Folder Redirection.
Right-click the Desktop folder Properties. Go back to desktop. Right-click the file you want
to share Properties Sharing tab copy
the Network Path.
Paste the copied path to the Root Path. From the Settings tab, check Also apply
redirection policy… Ok button.
Run the “gpupdate” for server & then client.
FILE SHARING AND REMOTE DESKTOP
CLIENT’S DESKTOP
Right-click desktop New Text Document to Right-click Computer Properties
create new document or file.
Click Remote Settings Type an administrator password Yes
Select Allow connections from computers Click Add button.
running any version of Remote Desktop (less
secure) Select Users.
Enter object names Check Names Ok Click Ok button.
button
SERVER’S DESKTOP
Type Remote Desktop Connection from search Enter the IP address of the client’s.
bar
Enter username & password Ok button. Click Yes button.
Double-click the
Shared folder (e.g. Sharing)
Username (e.g. ROY)
Desktop
Filename (e.g. ANYTHING GUYS)
SHARE PRINTER
Server’s Computer
Administrative Tools
Print Management Print Servers Win-P1V118NUMR
Printers
RC-Printer
Deploy with Group Policy
Browse
Default Domain Policy Ok
Check All Add
RC-Printer
Manage Sharing
Render print jobs on client computers
Ok
Client’s Computer
Network
Open Server
Printer and Install
KEYWORDS
1. IPCONFIG
2. Install DNS – dcpromo
3. Add 2 users – server manager Active Directory Users and Computers
4. DHCP range – server manager
5. File Service – share folder
6. Folder Redirection – group policy management
7. Remote Desktop Connection – search
8. Printer Deployment
