lOMoARcPSD|44747365

Q1 Module-5 CSS9 final - QUARTER 1 MODULE 1

COMPUTER SYSTEMS SERVICING 9
Computer System Servicing (Sultan Kudarat State University)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)
 lOMoARcPSD|44747365

9
TLE - ICT
COMPUTER SYSTEMS SERVICING
QUARTER 1 – MODULE 5

MATERIALS, TOOLS, EQUIPMENT

AND TESTING DEVICES

Prepared by:
AILEEN GRACE A. AVIGUETERO
Teacher III
San Isidro National High School

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

LESSON 5: MATERIALS, TOOLS, EQUIPMENT AND

TESTING DEVICES

INTRODUCTION

In this self-learning module, you will learn to identify and familiarize the necessary
materials, equipment, tools and testing devices needed in accomplishing the required output
based on the standard. After thorough preparation and identification, you may start performing
the job/work to meet a required ouput.

WHAT TO KNOW

The following tools and equipment are classified

according to their functions and uses.

EQUIPMENT AND TOOLS MATERIALS

ACCESSORIES

LAN Card Screwdriver (standard) Softwarer applications

UPS Screwdriver (Philips) Network OS Software
Server Long nore Pliers RJ 45
24 Port-hub Mechanical pliers UTP Cat 5 cable
Modem Allen Wrench Motherboard’s manual and
Fax Machine Multitester installer
Webcam Crimping Tools Sound device driver installer
PC Video Camera Soldering iron (30 watts)
USB External CD writer Wire stripper
USB Scanner LAN Tester
USB Printers Anti- static wrist wrap
USB Flash Drive Device drivers/installer

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

LAN Card - is a network interface card. This

is a computer circuit board or card that is
installed in a computer so that it can be
connected to a network.

Server – is a part of a network. It is a special

computer that users on the network can
access to carry out a particular job.

Port hub /Port – is a connector on the back

of a computer or other device. A port is either
a serial port or a parallel port.

Modem - (Modulator-Demodulator) The

modem is a device that allows a given
computer to share data or otherwise a device
which let computers exchange information.

Scanner- it is an input device that read text

or illustration printed on paper, translates the
information into a form that a computer can
use.

BIOS – Basic Input / Output System, chip

that controls the most basic functions of the
computer and performs a self-test every time
you turn it on.

USB – Universal Serial Bus, a hardware

interface for low-speed peripherals such
asthe keyboard, mouse, joystick, scanner,
printer and telephony devices.

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

RAM – Random Access Memory, is a

primary memory. This memory is used inside
the computer to hold programs and data while
it is running.

Printer - is a piece of hardware that produces

a paper copy (also known as ‘hardcopy”)

Flash drive– RAM that can retain data

without electrical power. It is widely used for
BIOS chips and for digital camera and digital
music storage.

Video Camera - camera using videotape: a

camera that records onto videotape.

Flat Screw Driver – is used to drive or fasten

negative slotted screws.

LAN Tester- for RJ11,12,45 & BNC w/

Remote Unit This ergonomic tester is
designed to test most network cable wiring.
You can either conduct an auto or manual test

Soldering Iron – is used to join two or more

metal conductors with the support of
soldering lead melted around it.

Desoldering Tool – is used to unsolder

unwanted parts or component in the circuit
with the support of soldering pencil.

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

Philips Screw Driver- is used to drive or

fasten positive slotted screws

Long nose Pliers – is used for holding,

bending and stretching the lead of electronics
component or connecting wire.

UTP – Unshielded Twisted Pair, is a popular

type of cable used in computer networking
that consists of two shielded wires twisted
around each

Webcam- is a video camera that feeds or

streams an image or video in real time to or
through a computer network, such as the
internet.

Crimping tools- A crimping tool is a device

to conjoin two pieces of metal by deforming
one or both of them in a way that causes them
to hold each other.

Network OS – A network operating system

(NOS) is an operating system that manges
Microsoft
network resources: essentially, an operating
system that includes special functions for
Windows Server 2019
connecting computers and devices into a
local area network (LAN).

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

USE THE PROVIDED ANSWER SHEET OR ANSWER ONLINE

WHAT TO DO
Online link: https://tinyurl.com/g9CSSmod5Activity

I- A. WORD SEARCH
Directions: Find the hidden words in the box and classify the materials, equipment
& tools according to their functions. Table is provided for your answer.

Equipment and Accessories Tools Materials

B. Directions: Write the letter of the best answer before the number.
____ 1. It is one of the commonly used boot drive to install and load the operating system
into thecomputer.
a. Flashdrive b. Floppy disk c. Blu-ray disk d. SD card
____ 2. It contains multiple ports. When a packet arrives at one port, it is copied
to the other ports so that all segments of the LAN can see all packets.
a. Lan card b. Hub c. Lan tester d. Server
____ 3. It is used to join two or more metal conductors with the support of soldering lead
melted around it.
a. Soldering Iron b. Desoldering Iron c. Switch d. Hub
5

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

____ 4. It is used for holding, bending and stretching the lead of electronics component or
connecting wire.
a. Flat Screw Driver b. Long Nose Flier c. Allen Wrench d. Crimping Tool
____ 5. A piece of software that installs the operating system on a computer's hard disk.
a. Software Apps b. OS Software c. Drivers d. BIOS
II- Directions: Identify the material, equipment or testing device that is being described
in the statement given in each item. Choose your answer inside the box.

LAN Card Server UTP LAN Tester

RJ45 Crimping Tool Port Hub Device Drivers

___________ 1. It is used for locking RJ45 into UTP cables.

___________ 2. Used for testing ethernet cables for faults or missing pairconnections.
___________ 3. A computer circuit board that is installed in a computer so that it can be
connected to a network.
___________ 4. A plug/jack that is used to connect computers onto Ethernet-based LAN.
___________ 5. A special computer that users on the network can access to carry out a
particular job.
___________ 6. A popular type of cable used in computer networking that consists of two
shielded wires twisted around each.
___________ 7. It is a connector at the black of a computer or other device.

CHECK YOUR UNDERSTANDING

I- A. Equipment and Tools Materials II-

Accessories 1. Crimping Tool
LAN Card Crimping tools UTP cable 2. LAN Tester
UPS LAN Tester OS applications
Screwdriver 3. LAN Card
printers 4. RJ 45
Sound device
5. Server
port-hub 6. UTP Cable
B. 1. a 2. b 3. a 4. b 5. a 7. Port Hub
6

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

USE THE PROVIDED ANSWER SHEET OR ANSWER ONLINE

SUMMATIVE EVALUATION
Online link: https://tinyurl.com/g9CSSmod5Summative

Name: Date:
Grade/Section: Score:

I- ARRANGING JUMBLED LETTERS

Directions: Arranged the Jumbled letters to come up with the correct answer. Write your
answer on the space before the number
1. It is a connector at the back of a computer or other device. (PHUORBT)
2. A computer circuit board installed in a computer so that it can be
connected to a network. (LDACNR)

3.A device that allows a given computer to share a data. (MDOME)

4. An input device that read text or illustration printed on paper, translated
the information into a form that a computer that can use. (SRENANC)
5. It is a special computer that users on the network can access to carry out
a particular job. (VREESR)
6. The chip that controls the most basic functions of the computer and
performs a self-test every time you turn it on. (IOBS)
7. The piece of hardware that produces a paper copy (also known as ‘hardcopy’)
of the information generated by the computer. (NRIEPTR)
8. It is used to drive or fasten positive slotted screws
(PLLIIPSH SWECR DEVRRI)
9. The popular type of cable used in computer networking that consists of
two shielded wires twisted around each (PUT LEBCA)
10. RAM that can retain data without electrical power. (FSAHL REIVD)

II- PERFORMANCE TASK (10 pts)

Look for any materials, tools, equipment that readily available at home that you might
use in computer operation in the future. Take a picture and paste in the answer sheet with the
description and importance or you may send it on my messenger. You may also draw it if you
have no device.

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

SCORING RUBBRIC FOR THE THE PERFORMANCE TASK

CRITERIA HIGHEST 2 1
POSSIBLE
SCORE
Picture Quality 2 Picture is clear and Picture is not so
the equipment is clear and the
emphasized properly equipment is
emphasized properly
Explanation 2 Picture is accurately Picture is not
explained accurately explained
Choice of Equipment 2 Equipment chosen is Equipment chosen is
on the list not on the list
Craftmanship 2 The learner spent The learner rushed
time and effort in producing the
producing the output output.
Expectation 2 The learner has The learner did not
exceeded your meet your
expectation expectation.

References:
❖ Technology and Livelihood Education – Grade 9
Learner’s Material
First Edition, 2013

❖ https://www.slideshare.net/MarvinBronoso1/css-l02-tool-and-equipment-in css

❖ http://gbs.rf.gd/2020/06/27/materials-tools-equipment-and-testing-devices/

Image Used:

https://commons.wikimedia.org/wiki/File:LAN_switch_-_back,_5_ports_(port_1_as_uplink).jpg
https://www.flickr.com/photos/sfllaw/78981814
https://commons.wikimedia.org/wiki/File:LAN_switch_-_back,_5_ports_(port_1_as_uplink).jpg
https://commons.wikimedia.org/wiki/File:Daewoo_modem.png
https://publicdomainvectors.org/photos/Scanner.png
https://www.techprevue.com/wp-content/uploads/2019/03/bios-introduction.jpg
https://upload.wikimedia.org/wikipedia/commons/a/ad/Mini_usb_AB.jpg
https://commons.wikimedia.org/wiki/File:Swissbit_2GB_PC2-5300U-555.jpg
https://openclipart.org/detail/221705/video-camera-icon-silhouette
https://commons.wikimedia.org/wiki/File:Yellow-flathead-screwdriver.jpg
https://commons.wikimedia.org/wiki/File:Cable-tester-and-analyzer-0c.jpg
https://www.flickr.com/photos/30478819@N08/50838189846
https://www.flickr.com/photos/30478819@N08/50838275232
https://www.flickr.com/photos/robertwebbe/45048593131
https://cdn.mos.cms.futurecdn.net/qvYBVYrjh6hfGUudgUQXxa-970-80.jpg
https://commons.wikimedia.org/wiki/File:Crimper_1_2019-01-27.jpg

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

ANSWER SHEET
IN MODULE 5
TLE ICT 9-CSS

NAME:________________________________________________ SECTION: _________________

WHAT TO DO

I- A. WORD SEARCH

Equipment and Accessories Tools Materials

B. Directions: Write the letter of the best answer before the number.

1. ___
2. ___
3. ___
4. ___
5. ___

II- Directions: Identify the material, equipment or testing device that is being described
in the statement given in each item. Choose your answer inside the box.
1. 6.
2. 7.
3.
4.
5.

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)

 lOMoARcPSD|44747365

ANSWER SHEET
IN MODULE 5
TLE ICT 9-CSS

NAME:________________________________________________ SECTION: _________________

SUMMATIVE EVALUATION

I-ARRANGING JUMBLED LETTERS

1. _____________________ 6. _____________________
2. _____________________ 7. _____________________
3. _____________________ 8. _____________________
4. _____________________ 9. _____________________
5. _____________________ 10. _____________________

II- PERFORMANCE TASK (10 pts)

Downloaded by CYRUS RIVERA (cyrus.rivera@deped.gov.ph)