V3-TLE-ICT-CSS-10-Q3 ICCS-Week-5-8

Bs education (Partido State University)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)
 10

TLE – ICT – CSS

Quarter 3 – Module 5-8:
INSTALLING AND CONFIGURING
COMPUTER SYSTEM (ICCS)
(Conduct Testing and Documentation)

NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

TLE- ICT – CSS - Grade 10
Alternative Delivery Mode
Quarter 3 – Module 5-8: Conduct Testing and Documentation
Second Edition, 2021

Republic Act 8293, section 176 states that: No copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the government
agency or office wherein the work is created shall be necessary for exploitation of such
work for profit. Such agency or office may, among other things, impose as a condition
the payment of royalties.

Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright
holders. Every effort has been exerted to locate and seek permission to use these
materials from their respective copyright owners. The publisher and authors do not
represent nor claim ownership over them.

Published by the Department of Education

Secretary: Leonor Magtolis Briones
Undersecretary: Diosdado M. San Antonio

Development Team of the Module

Writers: Reynald M. Manzano
Editors: Louelyn M. Lajot, Ruth Marie B. Eltanal
Reviewers: Louelyn M. Lajot, Ruth Marie B. Eltanal, Ericson B. Elnar
Typesetter: Salvacion N. Barot
Layout Artist: Reynald M. Manzano
Management Team: Senen Priscillo P. Paulin, CESO V Rosela R. Abiera
Marcelo K. Palispis, EdD Maricel S. Rasid
Joelyn M. Arcilla, EdD Elmar L. Cabrera
Nilita L. Ragay, EdD
Antonio B. Baguio, Jr., EdD

Printed in the Philippines by

Department of Education –Region VII Schools Division of Negros Oriental

Office Address: Kagawasan, Ave., Daro, Dumaguete City, Negros Oriental

Tele #: (035) 225 2376 / 541 1117
E-mail Address: negros.oriental@deped.gov.ph

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners, can
continue your studies and learn while at home. Activities, questions, directions,
exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by-step as
you discover and understand the lesson prepared for you.
Pre-tests are provided to measure your prior knowledge on lessons in each SLM.
This will tell you if you need to proceed on completing this module or if you
need to ask your facilitator or your teacher’s assistance for better
understanding of the lesson. At the end of each module, you need to answer the
post-test to self-check your learning. Answer keys are provided for each activity and
test. We trust that you will be honest in using these.
In addition to the material in the main text, Notes to the Teacher are also provided
to our facilitators and parents for strategies and reminders on how they can best
help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part of
this SLM. Use a separate sheet of paper in answering the exercises and tests. And
read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the tasks
in this module, do not hesitate to consult your teacher or facilitator.
Thank you.

ii

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 What I Need to Know

This module was designed and written with you in mind. It is here to help
you master Conduct Testing and Documentation. The scope of this module permits
it to be used in many different learning situations. The language used recognizes the
diverse vocabulary level of students. The lessons are arranged to follow the standard
sequence of the course. But the order in which you read them can be changed to
correspond with the textbook you arenow using.

The module contains only one module:

• Lesson 1 – Conduct Testing and Documentation After going through this

module, you are expected to:

1. Test devices/ systems and/or installation to determine whether itconforms

to requirements.
2. Conduct stress test to ensure reliability of equipment in accordance
with manufacturer’s instructions and system requirements

1 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 What I Know

Direction: Identify the word or phrase being described in the sentence. Write your
answers in your notebook.

1. It is a device that can take many types of measurements.

2. It clears space on a hard drive by searching for files that can besafely
deleted.
3. It is the physical parts or components of a computer.
4. A command-line tool that scans the operating system critical filesand
replaces files that are corrupted.
5. It is connected to a cable at one end using specific adapters, such as
an RJ-45, coaxial, or metal clips.
6. Software tools help diagnose computer and network problems and
determine which computer device is not functioning correctly.
7. Optimizes space on a hard drive to allow faster access to programsand
data.

8. A permanent software programmed into a read-only memory.

9. It prepares a hard drive to store information.

10. It is a set of instructions that tell a computer what to do.

Note: If you get 100% correct in this pre- assessment, skip the lesson but ifnot
and only get 50% to 99% correct, then proceed with the lesson.

2 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 Lesson
Conduct Test and
1 Documentation

What’s In

You were introduced with all the required knowledge and skills on the
installation of computer devices and OS. Now, after executing the proper procedures
I am sure that installation may be a very easy task for you. Those skills are going to
be very essential for the following lesson. In this lesson you will learn conduct test
and documentation.

What’s New

Direction: Use the clues below to fill in the crossword puzzle with the correct words.
Write your answers in your notebooks.

3 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 What is It

TESTING INSTALLED EQUIPMENT / DEVICES (COMPONENTS)

As a computer technician, you may need a decent understanding of the health

and safety regulations from ahead of time in your career, in order that you
understand the great practices demanded by law. Specifically, you need to:

✓ report any accidents

✓ take charge of your own health and safety when moving heavy components
✓ not cause any electrical hazards
✓ ensure that workstations meet safety requirements.

You need to stick to health and safety regulations as they're going to help to
protect you and others and can avoid any unnecessary proceeding for reckless and
unsafe working practices. If you identify any health and safety problems, you ought
to tell your line manager or the health and safety representative immediately.

Diagnostic tools are used to test and diagnose equipment.

Diagnostic tools include the following:

Digital multimeter is a device that can take many types of

measurements. It tests the integrity of circuits and the quality
of electricity in computer components. A digital multimeter
displays the information on an LCD or LED.

(Oomlout, 2009)

A loopback adapter, also called a loopback plug, tests the basic

functionality of computer ports. The adapter is specific to the
port that you want to test.

(blogspot.com, 2017)

4 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 A toner probe is a two-part tool. The toner part is connected to a
cable at one end using specific adapters, such as an RJ-45, coaxial,
or metal clips. The toner generates a tone that travels the length of
the cable. The probe part traces the cable. When the probe is in
near proximity to the cable to which the toner is attached, the tone
can be heard through a speaker in the probe.

(Dmitry G, 2014)

Software Tools

Like hardware tools, there are a variety of software tools that can be used to
help technicians pinpoint and troubleshoot problems. Many of these tools are free and
several come with the Windows operating system.

Disk Management Tools

Software tools help diagnose computer and network problems and determine
which computer device is not functioning correctly. A technician must be able to use
a range of software tools to diagnose problems, maintain hardware, and protect the
data stored on a computer.

You must be able to identify which software to use in different situations. Disk
management tools help detect and correct disk errors, prepare a disk for data
storage, and remove unwanted files.
Format: Prepares a hard drive to store information.
ScanDisk or CHKDSK: Checks the integrity of files and folders on a hard drive by
scanning the file system. These tools might also check the disk surface for physical
errors.
Defragmentation: Optimizes space on a hard drive to allow faster access to
programs and data.

Disk Cleanup: Clears space on a hard drive by searching for files that can be safely
deleted.

System File Checker (SFC): A command-line tool that scans the operating system
critical files and replaces files that are corrupted.

Testing Computer System

The best way to find out what's wrong is to take a proactive approach: Check
under your PC's hood with the following mostly free diagnostic tools and see if
anything is amiss--before disaster strikes.

5 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

Three Major Components of Computer System:

• Hardware- physical parts or components of a computer.

• Software- instructions that tell a computer what to do.
Software comprises the entire set of programs, procedures, and routines
associated with the operation of a computer system,
• Firmware- permanent software programmed into a read-only memory.

Test Your Hardware

Checking your computer hardware and its peripherals

1. Computer Monitor and its peripherals

How to run a Monitor Self-Test.

1. Power off both your computer and the monitor.
2. Disconnect the signal cable from the back of the computer.
3. Power on the
monitor.Note:

Depending on your monitor, while in the Self-Test mode, the monitor's LED
power indicator remains on, and the Check Signal Cable figure moves around on
the screen.
If your monitor alternate between 2 boxes Analog and Digital that is normal,
assome monitors supports both Digital and analog signal.

Test Results:

a) If you see any of the above check cable signals, that mean the problem is not
related to your monitor, please check your graphics card.

6 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 b) If you see the first figure with one of the colors missing, that means yourmonitor
requires service.
c) If you are unable to see any of the figures. But the light of the monitor is on, itmeans
your monitor requires service.

2. Keyboard and Mouse

How to Test a Laptop Keyboard

You don't need to check if the keys work to test your computer keyboard. If you open a
word processor and type a few lines, you don't really learn anything. Even if all the keys are
working properly, there may be an unclear problem with the keyboard device driver. To
successfully test your computer keyboard, you must test it with the Hardware Management
Utility in Microsoft Windows Device Manager.
Step 1
Click
"Start."
Step 2
Click "Control

Panel."Step 3

Click

"System."

Step 4

Click "Open Device

Manager."Step 5
Right-click on the list of computer keyboards. Select the Scan for hardware changes
option from the menu. Device Manager now tests your computer's keyboard. If you see an
"Error" icon next to the list, there is something wrong with your computer keyboard. For
more information on the error details, right-click on the device entry again and select
Properties.

3. Check the RAM

RAM, or random-access memory, is one of the most important hardware

components of a computer. It's the small hardware that experts really recommend
upgrading to improve the performance of your computer. You can see how much RAM
memory you have in the System Properties section of Control Panel, but the test is a bit
complicated.

7 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 Memory problems can lead to blue screens of death (BSOD) and even prevent your
computer from booting. If you want to test memory, you can use Memtest86 +, but the test
itself is not that simple. The test works automatically at boot time and takes more than 30
minutes to complete, so you need to create a bootable USB stick, or a bootable CD loaded
with software to run. If you really want to test the memory of your computer or the computer
you are buying, just read the instructions on the Memtest86 + website.

4. Check for Hard Disk Drive or Solid-State Drive Health

The Hard Disk Drive (HDD) or Solid-State Drive (SSD) contains the operating system
that is installed on your computer and once it gets some problems, you whole machine may
hang and freeze often or even fail in the long run. It is therefore important to make your
HDD/SSD in 100% health always.
Checking for HDD/SSD health is important especially if you are planning to
purchase a used computer since you don`t really know the current condition of the drive
itself. You can find plenty of tools that can be used to test the Hard Disk Drive or
SolidState Drive in your computer and if you have an SSD installed, you can use SSDLife
to check your SolidState Drive`s health.

8 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 For HDDs, you need to use another tool called HD Sentinel. Designed for hard
drives, this tool can help you identify problems, diagnose problems, and fix hard drive
problems before they get worse. To download this software, please visit the official
website of Hard Disk Sentinel.

5. Test CPU and GPU

The CPU and GPU are two very important hardware components on any computer and
are involved in data, commands, and all other major processing in between. Thanks to these
two hardware components, you can use Microsoft Office, PowerPoint, Excel and even open
your favorite browser. You need to make sure that these two hardware components are
working properly, as they can also be used to play games. You can use Furmark to test them.

If you're trying to test a low-end PC that doesn't have a dedicated GPU that
supports high resolutions, you should choose 1280 x 720. If you're testing a medium to
high-end PC with a GPU / graphics card, choose a resolution from 1280 x 720 to 1920 x
1080 Full HD graphics resolutions. If the screen flickers or distorts during the test, it
indicates a problem with the GPU.

9 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 To test your computer's CPU, simply open the CPU Burner and click the Start
button to start the test. If your computer hangs or freezes during the test, it means there
is a hardware problem or there is not enough cooling system for the CPU to work
properly.

Test Hardware to Prevent Serious Problems

As you can see, there are ways to test your computer hardware both online and offline.
Both help ensure that your computer is in good condition. These tests also help determine if
it's worth buying a popular computer.
6. I/O port and devices

• Connection between the I/O port and the peripheral device

• A faulty cable between the I/O port and the peripheral device
• A faulty peripheral device
• Incorrect settings in the System Setup program
• Incorrect settings in the system's configuration files
• Faulty I/O port logic on the system board

7. Power supply Test

• USE CAUTION HERE (Though you’d only be shocked with a max of 24 volts)
Plug the power supply into the wall.

• Find the big 24-ish pin connector that connects to the motherboard. Connect
the GREEN wire with the adjacent BLACK wire.

• The power supply’s fan should start up. If it doesn’t then it’s dead.

• If the fan starts up, then it could be the motherboard that’s dead. You can
use a multimeter to check if there is power output from the power supply

10 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

Testing Your Software
Check the different software installed in the computer.

1. Operating system

• Run live updates for your operating systems to get the latest
patches andprotection for your OS.

• Run registry scanners to check the OS registry configuration

2. Application Software

• Check for live updates

3. Anti-virus software

• Run anti-virus program

• Check for virus signature updates

• Check for spyware updates

Firmware Testing

Firmware is a computer program that is embedded in a hardware device and

enables control, monitoring, and data processing of technical products and systems. The
device included in the firmware provides a low-level control program for the device.
Examples of devices that include firmware include embedded systems, computers,
computer peripherals, and mobile phones.
Importance of Firmware testing is the certification of firmware system meets its
requirements with respect to functional correctness as well as performance, operational, and
implementational properties. Then to reduce the risk and improvethe performance.

To test the firmware

Check for the correct configuration can accomplish this by configuring theBIOS in
the computer

Error Beep codes

When you first turn on or reset your PC, a special diagnostic test called POST
(PowerOn SelfTest) is performed to check all the components in your PC. The POST
program sends a signal to each device that initializes the self-test built into each device.

The POST test is a two-stage process:

1. First, it will check all the basic components including among other things the
system clock, the processor, RAM, the keyboard controller and the Video
2. After the video has been tested the BIOS will then indicate any errors encountered
by displaying either a numeric code or a text message on the screen.

11 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 If the device fails the first part of POST, the BIOS sends a series of beeps through the
PC speaker (internal) to notify the PC user of the problem. These beeps are coded to allow
the user to diagnose the faulty component. If the POST completes successfully, the PC will
beep to notify the user that everything is fine.
Brands of BIOS chip

1. AMI BIOS
2. AWARD BIOS
3. Dell BIOS
4. IBM BIOS
5. Phoenix BIOS
Each type of BIOS chip has its own error code

AMI BIOS beep codes

Below are the AMI BIOS beep codes. However, because of the wide variety of
different computer manufacturers with this BIOS, the beep codes may vary.
Beep Code Descriptions
1 short DRAM refresh failure.
2 short Parity circuit failure.
3 short Base 64 K RAM failure.
4 short System timer failure.
5 short Process failure.
6 short Keyboard controller Gate A20 error.
7 short Virtual mode exception error.
8 short Display memory Read/Write test failure.
9 short ROM BIOS checksum failure.
10 short How to replace the CMOS battery.
11 short Cache memory error.
1 long, 3 short Conventional/Extended memory failure.
1 long, 8 short Display/Retrace test failed.
Two-tone siren Low CPU fan speed, voltage level issue.

12 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

Award BIOS beep codes

Below are Award BIOS beep codes. However, because of the wide variety of
differentcomputer manufacturers with this BIOS, the beep codes may vary.

Beep Code Description

1 long, 2 short Indicates a video error has occurred and the BIOS
cannot initialize the video screen to display any
additional information.
1 long, 3 short Video card not detected (reseat video card) or bad video
card.
Beeps repeating endlessly. RAM problem.
Repeated high frequency Overheating processor (CPU).
beeps while PC is running.

Repeated beeps Issue with the processor (CPU), possibly damaged.

alternating high & low
frequency.

If any other correctable hardware issues are found, the BIOS displays a message.

Dell beep codes

Beep Code Description

1 beep BIOS ROM corruption or failure.
2 beeps Memory (RAM) not detected.
3 beeps Motherboard failure.
4 beeps Memory (RAM) failure.
5 beeps CMOS battery failure.
6 beeps Video card failure.
7 beeps Bad processor (CPU).

For other Dell beep codes, please refer to Dell's beep codes and PSA diagnostics
chart page.

13 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

IBM BIOS beep codes
Below are general IBM BIOS beep codes. However, because of the wide variety of
models shipping with this BIOS, the beep codes may vary.

Beep Code Description

No beeps Why won't my computer turn on?
1 short beep Normal POST, computer is ok.
2 short beep POST error, review screen for error code.
Continuous beep No power, loose card, or short.
Repeating short beep No power, loose card, or short.

1 long and 1 short beep Motherboard issue.

1 long and 2 short beeps Video (Mono/CGA display circuitry) issue.
1 long and 3 short beeps. Video (EGA) display circuitry.
3 long beeps Keyboard or keyboard card error.
1 beep, blank or incorrect Video display circuitry.
display.

Phoenix BIOS beep codes

Below are the beep codes for Phoenix BIOS Q3.07 or 4.x.
Beep Codes Description
1-1-4-1 Cache Error

1-2-2-3 Bios ROM Checksum

DRAM test rate
1-3-1-3 RAM failure

1-3-4-1 RAM Failure data bits of low memory bus

1-3-4-3 RAM Failure data bits of high memory bus
1-4-1-1 ROM copyright notice
2-1-2-3 Test for unexpected interrupt

14 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 I have learned that _
I have realized that
I will apply

What I Can Do

Direction: Enumerate the following steps on how to conduct test and documentation
in computer system.

1. Testing the power supply

2. Testing a Monitor

3. Keyboard and mouse

Assessment

A. Direction: Identify the BIOS beep codes of the following BIOS chips. Write your
answers in your notebook.

AMI BIOS
Base 64 K RAM failure. 1.
DRAM refresh failure. 2.
Low CPU fan speed, voltage level issue. 3.
Cache memory error. 4.
ROM BIOS checksum failure. 5.

15 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 Phoenix BIOS
RAM Failure data bits of low memory 6.
bus
Cache Error 7.

RAM failure 8.
RAM Failure data bits of high memory 9.
bus
Bios ROM Checksum 10
DRAM test rate

IBM BIOS
Normal POST, computer is ok. 11.

Keyboard or keyboard card error. 12.

Motherboard issue. 13.

POST error, review screen for error code. 14.

No power, loose card, or short. 15

Additional Activities

In preparation for the next lesson, research or watch a video about installing
network cable.

16 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

 17 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

Text References

Bucaloy, Romel. “Conduct Test on Installed Computer System.docx - Lesson3 CONDUCT TEST
ON THE INSTALLED COMPUTER SYSTEM In the Previous Lesson You Were
Introduced with: Course Hero.” Conduct Test on Installed Computer System.docx -
Lesson3 CONDUCT TEST ON THE INSTALLED COMPUTER SYSTEM In the
previous lesson you were introduced with | Course Hero. Accessed April 10, 2021.
https://www.coursehero.com/file/46079092/Conduct-Test-on-Installed- Computer-
Systemdocx/.

Carballo, Ruel. “CONDUCT TEST ON THE INSTALLED COMPUTER SYSTEM.” ICT, January
26, 2019. https://baictchs09.wordpress.com/2019/01/26/conduct-test-on-the- installed-
computer-system/.

“Computer POST and Beep Codes.” Computer Hope's Free Computer Help, May 21, 2018.
https://www.computerhope.com/beep.htm.

Fitzpatrick, Jason. “How Can I Test My Computer's Power Supply?” How. How-To Geek, January
9, 2014. https://www.howtogeek.com/172933/how-can-i-test-my-computers- power-
supply/.

“How to Run a Monitor Self-Test?” Samsung levant, September 22, 2020.

https://www.samsung.com/levant/support/computing/how-to-run-a-monitor-self-test/.

“How to Test a Laptop Keyboard.” Techwalla. Accessed April 10, 2021.

https://www.techwalla.com/articles/how-to-test-a-laptop-keyboard.

Rolluqui, Lawrence. “Lesson3. Conduct Test On The Installed Computer System.” Scribd. Scribd.
Accessed April 10, 2021. https://www.scribd.com/document/329074241/Lesson3-
Conduct-Test-on-the-Installed-Computer-System.

Tandle, Rhushikesh. “How to Perform Hardware and Firmware Testing of Storage Box.” Storage,
Networking, Virtualization and Cloud Blogs - Calsoft Inc. Blog, June 30, 2017.
https://blog.calsoftinc.com/2017/06/how-to-perform-hardware-and-firmware- testing-of-
storage-box.html.

“Undertake Final Inspections on the Installed Devices Systems to Ensure: Course Hero.” systems to
ensure | Course Hero, January 16, 2021.
https://www.coursehero.com/file/p4qda5lt/Undertake-final-inspections-on-the- installed-
devices-systems-to-ensure/.

“PLAN AND PREPARE FOR INSTALLATION.” ICT, August 29, 2018.

https://baictchs09.wordpress.com/2018/08/29/plan-and-prepare-for-installation/.

18 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

Image References

oomlout. “Category:Digital Multimeters.” Wikimedia Commons, 2009.

https://commons.wikimedia.org/wiki/Category:Digital_multimeters.

Unknown. “Tools for Computer Hardware Servicing.” Tools for computer hardware servicing,
January 12, 2017. http://ndcllano.blogspot.com/2017/01/tools-for-computer-hardware-
servicing.html.

Dmitry G. “Category:Fluke Corporation - Wikimedia Commons.” Wikimedia Commons, 2014.

https://commons.wikimedia.org/wiki/Category:Fluke_Corporation.

19 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)

For inquiries or feedback, please write or call:

Department of Education – Schools Division of Negros Oriental

Kagawasan, Avenue, Daro, Dumaguete City, Negros Oriental

Tel #: (035) 225 2376 / 541 1117

Email Address: negros.oriental@deped.gov.ph
Website: lrmds.depednodis.net

20 NegOr_Q3_CSS10_Module5-8_V2

Downloaded by John Michael Itable (johnmichael.itable@deped.gov.ph)