Computer Systems Servicing NC2 Reviewer
POSIBLE ORAL QUESTIONS
Q You have just installed Windows 98. During the testing, it fails to start afterthe
Starting Windows 98 message appears. What should you do to troubleshoot this
problem? Name at least two ways.
A Type Win /d:m at the command prompt to start windows, or press F8 when
windows restarting and select safe mode.
Q You have configured a dual boot system consisting Windows 98 in FAT 32
partition and Windows 2000 using NTFS partition. You check your Windows 2000
installation and it looked good. However, when you boot to Windows 98 you cant
seethe files in the NTFS partition. What might be the source of the problem?
A Windows 98 is not compatible with NTFS
Q You successfully install Windows 2000 Professional and you want to check
your drives for errors. Name one way of checking for errors
A Open control panel, click administer tool, click computer management and
within the storage tab click disk defragmenter
Q You want to setup a dual boot scenario between Windows 98 and Windows
2000. How would you do this?
A Partition your hard drive. Install Windows 98 first and then install Windows
2000 to the second partition.
Q A customer complains that his hard disk is making lots of noise. After
examining the computer and hearing the noise for yourself, you notice that high
pitch noise seemsto be coming from the fan in the power supply. Which
component should be replaced?
Page9
Computer Systems Servicing NC2
Reviewer
A Power Supply
Q What part of HP Laser printer is malfunction if you
receive a 50 service error?
A FUSER
Q A customer complains that he cant get his computer
to work. When he turn it on, there is no video and hears a
series of beeps. The beeps are in the sequence of one
long beep, then two short beeps. You tell the customer to
bring the machine in. Upon further examination you are
able to identify the problem. What should be your next
step? What is the error?
A Replace the video card and make sure it is tighten.
Q What is indicated by a 201 error at system start
up?
A Bad memory. Most of the error begins with 2 indicate
memory error of some sort.
Q What two command files are used by DOS to
configure the computer?
A Autoexec.bat and Config.sys
Q You install a newly purchase sound card into your
computer, but upon rebooting you find that the
newdevice is not recognized by the system. Moreover,
your modem, which has always worked perfectly, has
stopped functioning. What is probably the problem?
A The sound card is using the same IRQ as the modem.
Q What is the correct way to use the protocolutility
IPCONFIG in a Windows 2000 environment?
A Choose start, click run and type cmd then press
enter key. At the command prompt type IPCONFIG
Q Transmission Control Protocol/Internet Protocol
(TCP/IP) is a collection of protocols that help manage
the internet communication. Each computer running
TCP/IP must have a unique IP address assigned to it.
What is an IP address? Describe the format?
Page10
Computer Systems Servicing NC2 Reviewer
A An IP address is set of four numbers, each of which must be from 0 to 255.
Q What is the correct sequence to start Windows 2000 backup program?
A Choose start > Programs > Then Accessories > Then System Tools > Then
Backup.
Q Youve setup a network whereby each computer act as a client and a server
and in which each user shares each others resources,including printers. What is
the correct term for such arrangement?
A Peer to peer networking
Q Sending and receiving electronic mail (email) is a common benefit of the
internet. Assuming a user has access to the internet on a properly configure PC.
What is needed before a user can begin using e mail?
A Email account and email client such as Microsoft Outlook
Q What is the name of the executable file for Microsoft Backup FOR dos? For
Windows 3.x?
A MSBACKUP.EXE
Q What would you type at aDOS command line to start the Microsoft AntiVirus?
A Type MSAV at the command prompt.
Q What program in the control panel can be used to create a startup disk?
A Add / Remove Programs
Q What is the final option in the Configure Screen menu?
A Compatibility test
Q The MSBACKUP Program in DOS receives its settings from what file?
Page11
Computer Systems Servicing NC2
Reviewer
A SET file
Q Which Windows NT 4.0 utility should you use after
installing a new hard drive to make usable?
A Disk Administrator
Q Which is the proper command to install Windows
2000 recovery console as a startup option in the
CD Rom in drive E?
A E:\i386\winnt32.exe /cmdcons
Q During the Windows 2000 setup, you are askedto
choose between NTFS file system and the FAT file
system. Can you site disadvantage on NTFS?
A NTFS is more sophisticated file system however it is
not compatible with DOS.
Q After the successful upgrading to Windows 2000,
what should you do with the temporary files
generated during the setup process?
A Nothing. Because all generated temporary files are
automatically remove during the process.
Q You are preparing the computer for dual booting
between Windows 98 and 2000. Your drive is
partitioned, and Windows 98 is already installed.
What should be your next step?
A You must choose FAT for Windows 2000 partition
Q Which of the following is not the Windows 2000 key
Boot file? Why?
A Autoexec.bat This is the key boot for Windows 3.1
and 9x are not necessary for Windows 2000
Q What is the most likely cause of a paperjam on a dot
matrix printer?
A Obstructed paper path
Page12
Computer Systems Servicing NC2
Reviewer
Q HP printer laser jet III printer is not printing at all. The
computer indicates that the device on LPT1 is not
ready. You perform a service self test to the printer and
it prints on the page of vertical lineswith no problem. The
front panel self test does not work, however which
component do you suspect is giving you the problem?
A The Formatter
Q A computer is experiencing random reboots and
phantom problems that disappear after reboot.
What should you do?
A Open the cover and reset all cards and chips
Q Using either a Windows 9X or Windows 2000
workstation, what components do you need to
connect to a Microsoft network server?
A Protocol, client and adapter
Q You are enable file and printer sharing on your
Windows 9X system. You must now specify how
security will be handled. What could be the options?
A Share level Access Control and User level control
Q A Windows 9x workstation includes default support
for what network OS/client types?
A MS Windows Networking and Novells Netware
within a Windows 9x workstation, clients are
provided for Microsoft and Novell Network
Q What is the third element required to configure a
Windows 2000 system as a network client? A client,
an adapter, and ___?
A Protocol
Q What would you need to do to create a new dialup
networking (DUN) connection within a Windows 9x
system?
Page13
Computer Systems Servicing NC2
Reviewer
A Choose Start > Programs > Accessories , then
choose and click Dial up networking then double click
Make newconnection or double click My computer
icon on the desktop then click dial up networking.
Q What would you use to map a network drive in both
Windows 9x and Windows 2000?
A Map network drive
Q What type of backup involves selecting the files
youwant to backup as well as when you want them to
backup?
A Custom Backup
Q There are several pieces of backup hardware that
are currently available. Of the following, which is not
valid backup hardware?
A Stationary hard disk
Q Which type of backup that backup files on a disk that
has changed since the last full backup?
A Differential backup
Page14
