lOMoARcPSD|11563233
CSS CBLM COC2 - zasfa
Computer Programming 2 (HTML, CSS/Web Interfaces) (STI College)
StuDocu is not sponsored or endorsed by any college or university
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Information sheet 1.5 Networking Cables and its types
Networking cables are used to connect one network device to other network
devices or to connect two or more computers to share printer, scanner etc. Different types
of network cables like Coaxial cable, Optical fiber cable, Twisted Pair cables are used
depending on the network's topology, protocol and size.
While wireless may be the wave of the future, most computer networks today still
utilize cables to transfer signals from one point to another.
Twisted pair cable Coaxial Cable Optical Fiber Cable
Types of Twisted pair cable
1. Straight through cable
2. Cross link cable
Straight-through cable is a type of twisted pair copper wire cable for local area
network (LAN) use for which the RJ-45 connectors at each end have the same. Straight-
through cable is also commonly referred to as patch cable.
An Ethernet crossover cable is a type of Ethernet cable used to connect
computing devices together directly
. T568A . T568B . T568A T568B
1. White green 1. White green 1. White green 1. White Orange
2. Green 2. green 2. green 2. Orange
3. White Orange 3. White orange 3. White orange 3. White Green
4. Blue 4. Blue 4. Blue 4. Blue
5. White Blue 5. White Blue 5. White Blue 5. White Blue
6. Orange 6. Orange 6. Orange 6. Green
7. White Brown 7. White Brown 7. White Brown 7. White Brown
8. Brown 8. Brown 8. Brown 8. Brown
Straight cables are used to connects: Crossover cables are used to connects:
o workstations to hubs o workstations to workstations
o workstations to switches o workstations to servers
o servers to switches o hubs to switches
o switches to switches
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Operation Sheet 1.1
Operation Title Creating Ethernet Cable
The objective of this operation sheet is to make
Operation Objectives
students learn on how to create deferent cables.
Unshielded twisted pair (UTP) patch cable
Materials Modular connector (RJ45)
Crimping tool
Cable tester (optional, but recommended)
Procedures
Step 1: Strip the cable jacket
about 1.5 inch down from the
end.
Step 2: Spread the four pairs of
twisted wire apart and untwist the
wire pairs and neatly align them
in the T568A orientation or
depending on what cable you are
doing.
Step 3: Cut the wires as straight
as possible, about 0.5 inch above
the end of the jacket.
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Step 4: Carefully insert the wires
all the way into the RJ-45,
making sure that each wire
passes through the appropriate
guides inside the connector.
Step 5: Push the connector
inside the crimping tool and
squeeze the crimper all the way
down
Step 6: Repeat steps 1-5 for the
other end of the cable.
Step 7: To make sure you've
successfully terminated each
end of the cable, use a cable
tester to test each pin.
When you're all done,
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Operation Sheet
1.2
Operation Title Creating Ethernet Cable
The objective of this operation sheet is to make
Operation Objectives students learn on how to wire/punch down cable
on patch panel.
Patch Panel
Materials Punch down tool
Crimping tool
UTP Cable
Procedures
1. Prepare all necessary tools, equipment and materials
2. Strip the jacket of UTP Cable
3. Spread the four pairs of twisted wire apart and untwist the wire pairs and neatly
align them on patch panel base on color coding.
4. Use punch down tool to secure the connection of each wire to patch panel
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Task sheet 1.1
Title : Creating Ethernet UTP Cable
Supplies/ 3 meters UTP Cable
Materials Crimping Tool
RJ-45
Wire Stripper
Scissors
Equipment Data Cable Tester
Instructions:
1) Create two Ethernet Cable
2) 2m for Straight Cable
3) 1m for cross cable
4) You can call the attention of the trainer/assessor after you finish the task.
5) The trainer/assessor will rate your task based on the performance criteria
checklist.
Assessment Methods
Direct Observation
Portfolio assessment using performance criteria checklist
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Performance Criteria Checklist1.1
Trainee’s Name: Date:
IF YES
CRITERIA Put their ratings
Very Poor =1 NO
Satisfactory =4
Poor =2
Did the trainee… Very Satisfactory=5
Fair =3
Created Straight cable based on
standard?
Created cross cable based on
standard?
Followed OHS on
creating Ethernet cable?
TOTAL POINTS
Trainee’s Signature
Trainer’s Signature
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Task sheet 1.2
Title : Installing and terminating Patch panel
Supplies/ 3 meters UTP Cable
Materials Crimping Tool/Wire Stripper
Punch Down Tool
Patch Panel
Equipment Data Cable Tester
Instructions:
1) Install/connect network cable on 6 ports of patch panel
2) You can call the attention of the trainer/assessor after you finish the task.
3) The trainer/assessor will rate your task based on the performance criteria
checklist.
Assessment Methods
Direct Observation
Portfolio assessment using performance criteria checklist
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
lOMoARcPSD|11563233
Performance Criteria Checklist1.2
Trainee’s Name: Date:
IF YES
CRITERIA Put their ratings
Very Poor =1 NO
Satisfactory =4
Poor =2
Did the trainee… Very Satisfactory=5
Fair =3
Installed cable on patch panel?
Followed OHS on installing
network cable?
TOTAL POINTS
Trainee’s Signature
Trainer’s Signature
Downloaded by InfoTutorial 2020 (kaloy2398@gmail.com)
