TLE-CSS10 - 11 - q2 - wk2 - Install Operating System and Drivers For Peripherals Devices - v3
TLE-CSS10 - 11 - q2 - wk2 - Install Operating System and Drivers For Peripherals Devices - v3
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of
the Government of the Philippines. However, prior approval of the government agency or
office wherein the work is created shall be necessary for exploitation of such work for profit.
Such agency or office may, among other things, impose as a condition the payment of
royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright holders.
Every effort has been exerted to locate and seek permission to use these materials from their
respective copyright owners. The publisher and authors do not represent nor claim ownership
over them.
Introduction
Learning Competency
Objectives
At the end of this Guided Learning Activity Kit, you should be able to:
1|P age
Review
Components Requirements
Processor
Memory
Others
Discussion
Components Requirements
Processor 1.6 gigahertz (GHz) or faster 32-bit
(x86) or 64-bit (x64) processor
Memory 2 gigabyte (GB) RAM (32-bit) or 4
GB RAM (64-bit)
Hard Disk Capacity 16 GB available hard disk space
(32-bit) or 20 GB (64-bit)
Display DirectX 9 graphics device with
WDDM 1.0 or higher driver.
2|P age
Two ways to install Windows 7
NOTE:
You can upgrade from Windows Vista only if you run the installer from
within Windows Vista. If you do a fresh boot using the Windows 7
installation disc, you will not be able to upgrade (you will be asked to rerun
the installation from within Windows).
3|P age
3. Save the configuration and exit BIOS then reset your computer.
4. Insert Windows 7 DVD into your DVD drive then start up your
computer, Windows 7 will be loading files.
4|P age
6. Click Install now.
5|P age
9. (Skip this step if you chose Upgrade and have only one
partition) Select the drive where you want to install Windows 7 and
click Next. If you want to make any partitions, click Drive options
(advanced), make the partitions and then click Next.
10. It will now start installing Windows 7. The first step, (e.i. Copying
Windows files) was already done when you booted the Windows 7
DVD so it will be completed instantly.
11. After completing the first step, it will expand (decompress) the files
that it has copied.
12. The third and fourth step will also complete instantly like the first
step.
6|P age
13. After that, it will automatically restart after 15 seconds and continue
the setup. You can also click Restart now to restart without any
delays.
14. After restarting for the first time, it will continue the setup. This is
the last step so it will take the most time that the previous steps.
15. It will now automatically restart again and continue the setup. You
can click Restart now to restart without any delays.
Note:
Before the system restarts, you must remove the Bootable USB
flash drive so that it will not proceed to installation process again,
unless you enter to system BIOS to change the boot sequence.
7|P age
After Windows 7 has been restarted, you should see the screen showing
the “setup is preparing your computer for first use”.
16. Type your desired username in the text-box and click Next. It will
automatically fill up the computer name.
17. If you want to set a password, type it in the textboxes and click
Next.
8|P age
18. Type your product key in the textbox and click Next. You can also
skip this step and simply click next if you want to type the product
key later. Windows will run only for 30 days if you do that.
9|P age
19. Select your desired option for Windows Updates.
10 | P a g e
Activities
Guided Practice 1
CROSSWORD PUZZLE
In this puzzle, write the answer that corresponds to the given system
hardwares. Write the answers on your paper.
Across
1. 1.6GHz
4. Graphic Device
Down
2. 4GB
3.16GB
11 | P a g e
Guided Practice 2
Updates Username
Password date
Network product key
Windows 7 Operating system
1. Type your desired __________ in the text-box and click Next. It will
automatically fill up the computer name.
2. If you want to set a __________, type it in the textboxes and click Next.
3. Type your __________ in the textbox and click Next. You can also skip
this step and simply click next if you want to type the product key later.
4. Select your desired option for Windows _________.
5. Select your time,_______ , and click Next.
6. If you are connected to any _________, it will ask you to set the network’s
location. After that, you are done installing the OS.
Independent Practice
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
12 | P a g e
Assessment
_____1. Go to Boot menu and choose Boot from USB Bootable flash drive as
your priority 1.
_____2. Turn your computer on then press Del or F2 (depending on your
computer’s main board) to enter the system BIOS.
_____3. Insert Windows 7 DVD into your DVD drive then start up your
computer, Windows 7 will be loading files.
_____4. Save the configuration and exit BIOS then reset your computer.
_____5. Check I accept the license terms and click Next.
_____6. Click Install now.
_____7. Select your language, time & currency format, keyboard or input
method and click Next.
_____8. It will now start installing Windows 7. The first step, (e.g. Copying
Windows files) was already done when you booted the Windows 7 DVD so it
will be completed instantly.
_____9. (Skip this step if you chose Upgrade and have only one
partition) Select the drive where you want to install Windows 7 and click
Next. If you want to make any partitions, click Drive options (advanced),
make the partitions and then click Next.
_____10. Click Upgrade if you already have a previous Windows version or
Custom (advanced) if you don’t have a previous Windows version or want to
install a fresh copy of Windows 7.
_____11. After completing the first step, it will expand (decompress) the files
that it has copied.
_____12. It will now automatically restart again and continue the setup. You
can click Restart now to restart without any delays.
_____13. After restarting for the first time, it will continue the setup. This is
the last step so it will take the most time that the previous steps.
_____14. After that, it will automatically restart after 15 seconds and
continue the setup. You can also click Restart now to restart without any
delays.
_____15. The third and fourth step will also complete instantly like the first
step.
13 | P a g e
Reflection
Complete the sentences below to tell how well you have learned from our
lessons well. Write the answers on your paper.
References
Developed Module:
Department of Education – Division of Bukidnon Region X
Office Address: Fortich St., Sumpong, Malaybalay City, Bukidnon
Telefax: (088)-813-3634, E-mail Address: bukidnon@deped.gov.ph
Website: depedbukidnon.net
2020. Google.Com.
https://www.google.com/search?q=Windows+7+installation&tbm=isch&sou
rce=iu&ictx=1&fir=ekzEIlGSsg1c8M%252CbxbnSXAw6UoQJM%252C_&vet=
1&usg=AI4_-
kQEiOhL47u1Fq8dD94tfa3dzVdThQ&sa=X&ved=2ahUKEwjUyevPgd7sAhW
Gc3AKHeAAAigQ_h16BAgNEAU#imgrc=PQy0gcXxMGB9HM.
14 | P a g e
15 | P a g e
Across
1. PROCESSOR
4. DISPLAY
Down
2. MEMORY
3.HARD DISK
Guided Practice 1
1. Username
2. password
3. product key
4. Updates
5. date
6. network
Guided Practice 2
Assessment
1. 2 9. 9
2. 1 10. 8
3. 4 11. 11
4. 3 12. 15
5. 7 13. 14
6. 6 14. 13
7. 5 15. 12
8. 10
Key to Corrections
Acknowledgment
Finally, the parents and other home learning facilitators for giving the
learners the needed guidance and support for them to possibly accomplish
the tasks and for gradually helping them become independent learners.
16 | P a g e
For inquiries or feedback, please write or call: