BUDGET OF WORK IN MEDIA AND INFORMATION LITERACY

FIRST SEMESTER 1st QUARTER

GRADE -12 MIL

S.Y. 2022-2023
(Core Subject)
Subject: Computer Systems Servicing (exploratory course 7/8)
Grade Level: Junior High School
Quarter: First QUARTER
BOW PER CSS (exploratory course 7/8)

Most Essential Learning Competencies

WEEK TOPIC/SUB- ASSESSMEN

DATE LEARNING COMPETENCIES ACTIVITIES
NO. TOPIC/CODE T
Most Essential Learning
Grading Period
Competencies

LESSON 1: USING AND MAINTAINING HAND TOOLS (UHT)

1 LO 1. Plan and prepare for tasks to be Plan the tools Discussion
undertaken and material in
1.1 Identify tasks to be undertaken properly TLE_IACSS9- accordance with
1.2 Identify and select appropriate hand tools 12UHT-IIIa-17 the task
according to the task requirements requirements

2 LO 2. Prepare hand tools Preparing the demonstration

2.1 Check appropriate hand tools for proper tools and
operation and safety TLE_IACSS9- material in
1 weeks 2.2 Identify and mark unsafe or faulty tools for 12UHT-IIIb-18 accordance with
repair according to standard company procedure the task
requirements
3 LO 3. Use appropriate hand tools and test Activities: Use demonstration
equipment
appropriate
3.1 Use tools according to tasks undertaken.
3.2 Observe all safety procedures in using tools hand tools and
at all times and use appropriate PPE TLE_IACSS9- test equipment
3.3 Report malfunctions, unplanned or unusual 12UHT-IIIc-19 according to
events to the supervisor tasks
requirement and
observe safety
4 LO 4. Maintain hand tools Video Video lesson
4.1 Do not drop tools to avoid damage; carry out presentation of
routine maintenance of tools according to how to Maintain
standard operational procedures, principles, and hand tools
techniques according to
TLE_IACSS9-
4.2 Store tools safely in appropriate locations in standard
12UHT-IIId-20
accordance with manufacturer’s specifications or operational
standard operating procedures procedures,
principles, and
techniques

LESSON 2: PERFORMING COMPUTER OPERATIONS (PCO)

5 LO 1. Plan and prepare for task to be undertaken Plan and demonstration
1.1 Determine requirements of task in prepare for the
accordance with the required output task in computer
1.2 Select appropriate hardware and software operation and
according to task assigned and required outcome data security
TLE_IACSS9-
1.3 Plan a task to ensure that OSH guidelines and guidelines in
12PCO-Ic-d-4
procedures are followed accordance with
1.4 Follow client-specific guidelines and existing
procedures procedures,
1.5 Apply required data security guidelines in observe OSH
accordance with existing procedures standard
6 2 weeks LO 2. Input data into computer Plan and demonstration
2.1 Enter the data into the computer using prepare for the
appropriate program/application in accordance task in computer
with company procedures operation and
2.2 Check the accuracy of information and save data security
TLE_IACSS9-
the information in accordance with standard guidelines in
12PCO–Id-e-5
operating procedures accordance with
2.3 Store inputted data is in storage media existing
according to requirements 2.4 Perform work procedures,
within ergonomic guidelines observe OSH
standard
7 LO 3. Access information using computer Plan and demonstration
3.1 Select correct program/application based on prepare for the
job requirements task in computer
3.2 Access program/application containing the operation and
information required according to company data security
TLE_IACSS9-
procedures guidelines in
12PCO-Ie-f-6
3.3 Select, open, and close desktop for navigation accordance with
purposes existing
3.4 Carry out keyboard techniques in line with procedures,
OSH requirements observe OSH
standard
8 O 4. Produce output/ data using computer Plan and demonstration
system 4.1 Process entered data using prepare for the
appropriate software commands task in computer
4.2 Print out data as required using computer operation and
hardware /peripheral devices in accordance with data security
TLE_IACSS9 -
standard operating procedures guidelines in
12PCO -If - 7
4.3 Transfer files and data between compatible accordance with
systems using computer software, existing
hardware/peripheral devices in accordance with procedures,
standard operating procedures observe OSH
standard
9 LO 5. Use basic functions of a www - browser to Plan and demonstration
locate information prepare for the
5.1 Establish information requirements for task in computer
internet search operation and
5.2 Launch browser TLE_IACSS9 - data security
5.3 Load search engine 12PCO -Ig - h - guidelines in
5.4 Enter appropriate search criteria/or URL of 8 accordance with
site 5.5 Follow relevant links to locate required existing
information procedures,
5.6 Bookmark useful pages and print as required observe OSH
standard
10 LO 6. Maintain computer equipment and systems How to maintain Discussion and
6.1 Implement procedures for ensuring security computer video
of data, including regular backups and virus equipment and presentation
TLE_IACSS9 -
checks in accordance with standard operating data security
12PCO -Ii - j - 9
procedures
6.2 Implement basic file maintenance procedures
in line with the standards operating procedures
LESSON 3: PERFORMING MENSURATION AND CALCULATION
(PMC)
11 LO 1. Select measuring instruments Measurement Discussion and
1.1 Identify object/s or component to be and specification video
measured presentation
TLE_IACSS9-
1.2 Obtain correct specifications from relevant
12PMC-IIa-b10
source
1.3 Select measuring tools in line with job
requirements
12 LO 2. Carry out measurements and calculation Measurement Discussion and
2.1 Select appropriate measuring instrument to and specification video
1 week achieve required outcome presentation
2.2 Obtain accurate measurements for job
2.3 Perform calculation needed to complete task
using the four mathematical fundamental
operations addition (+), subtraction (-),
TLE_IACSS9-
multiplication (x), and division (÷)
12PMC-IIb-d11
2.4 Use calculation involving fractions,
percentages and mixed numbers to complete
workplace tasks
2.5 Self-check and correct numerical
computation for accuracy
2.6 Read instruments to the limit of accuracy of
the tool
13 LO 3. Maintain measuring instruments Measurement Discussion and
3.1 Ensure proper handling of measuring and specification video
instruments to avoid damage and clean it before TLE_IACSS9- presentation
and after using 3.2 Identify tasks to be 12PMC-IIe-f12
undertaken for proper storage of instruments 457
according to manufacturer’s specifications and
standard operating procedures
LESSON 4: PREPARING AND INTERPRETING TECHNICAL
DRAWING (PITD)
14 LO 1. Identify different kinds of technical PREPARING AND Discussion and
drawings INTERPRETING video
1.1 Select correct technical drawing in TECHNICAL presentation
accordance with the job requirement TLE_IACSS9- drawings in
1.2 Segregate technical drawings in accordance 12PITD-IIg-h14 accordance with
with the types and kinds of drawings the types and
kinds of
drawings
15 LO 2. Interpret technical drawing PREPARING AND Discussion and
1 Week 2.1 Recognize components, assemblies, or INTERPRETING video
objects as required TECHNICAL presentation
2.2 Identify dimensions of the key features of the drawings in
objects depicted in the drawing TLE_IACSS9- accordance with
2.3 Identify and interpret symbols used in the 12PITD-IIg-h14 the types and
drawing kinds of
2.4 Check and validate drawing against job drawings
requirements or equipment in accordance with
standard operating procedures
16 LO 3. Prepare/ make changes to electrical/ PREPARING AND Discussion and
electronic schematics and drawings INTERPRETING video
3.1 Draw and identify correctly electrical/ TECHNICAL presentation
LE_IACSS9-
electronic schematic drawings in
12PITD-IIh-i15
3.2 Identify correct drawing; select and use accordance with
equipment in accordance with job requirements the types and
kinds of
drawings
17 LO 4. Store technical drawings and equipment/ TLE_IACSS9- PREPARING AND
instruments 12PITD-IIj-16 INTERPRETING
4.1 Identify tasks to be undertaken for care and TECHNICAL
maintenance of drawings according to company drawings in
procedures accordance with
4.2 Record technical drawings and prepare an the types and
inventory in accordance with company kinds of
 procedures drawings
4.3 identify tasks to be undertaken for proper
storage of instruments according to company
procedures
LESSON 5: TERMINATING AND CONNECTING ELECTRICAL
WIRING AND ELECTRONICS CIRCUIT (TCEW)
18 LO 1. Plan and prepare for termination/ Observe proper Discussion and
connection of electrical wiring/ electronics connection in video
circuits accordance with presentation
1.1 Check materials according to specifications the specification
and tasks and task
1.2 Select appropriate tools and equipment TLE_IACSS9- requirements
according to task requirements 12TCEW-IIIef-
1.3 Follow planned task to ensure OHS 21
guidelines and procedure
1.4 Prepare electrical wiring/electronics circuits
correctly for connecting/terminating in
accordance with instruction and work site
procedures
19 1 Week LO 2: Terminate/connect electrical wiring/ Observe proper Discussion and
electronic circuits Observe safety procedures in connection in video
using tools and use appropriate personal accordance with presentation
protective equipment at all times the specification
2.2 Identify the tasks to be undertaken to work and task
safely in accordance with the workplace and requirements
standard procedures TLE_IACSS9-
2.3 Use appropriate range of methods in 12TCEW-IIIgi-
termination/connection in accordance to 22 459 2.1
specifications, manufacturer’s requirements, and
safety
2.4 Follow correct sequence of operation
2.5 Adjust used accessories
2.6 Confirm termination/connection in
accordance with job specification
20 LO 3: Test termination/connections of electrical Observe proper Discussion and
wiring/electronics circuits connection in video
3.1 Conduct complete testing of accordance with presentation
termination/connection of electrical the specification
wiring/electronics circuits in compliance with and task
TLE_IACSS9-
specifications and regulations using appropriate requirements
12TCEW-IIIi-j23
procedures and equipment
3.2 Check wirings and circuits using specified
testing procedures
3.3 Respond to unplanned events or conditions
in accordance with established procedures
LESSON 6: TESTING ELECTRONIC COMPONENTS (TEC)
21 LO 1: Determine criteria for testing electronics Obtain and Discussion and
components clarify work video
1.1 Obtain and clarify work instructions based on instructions and presentation
job order or client requirements application
1.2 Consult responsible person for effective and based on the
proper work coordination manufacturer
1.3 Obtain and interpret data sheets/application TLE_IACSS9- specification.
notes based on manufacturer’s specifications 12TEC-IVa-c24
1.4 Define testing criteria to ensure that
components meet technical and quality
requirements
1.5 Document and communicate testing criteria
to relevant personnel
22 LO 2: Plan an approach for components testing TLE_IACSS9 - Plan and Discussion and
2.1 Identify various testing methods based on 12TEC -IVc - e - prepare work video
types of electronic components 25 instructions and presentation
2 Weeks 2.2 Determine characteristics and application
appropriateness of testing methods to be used based on the
 during development and on completion manufacturer
2.3 Consider/select testing methods in relation specification.
to appropriate testing strategy
2.4 Develop plan for testing components at
specified points during development and on
completion
2.5 Prepare and check required test and
measuring instruments and tools in accordance
with established procedures
2.6 Establish records system to document
testing results, including problems and faults
23 LO 3: Test components Plan and Discussion and
3.1 Apply appropriate testing methods to prepare work video
electronic components in accordance to instructions and presentation
technical specifications 3.2 Detect and record application
problems and faults by testing 3.3 Document based on the
remedial steps manufacturer
TLE_IACSS9 -
3.4 Resolve detected problems and faults during specification.
12TECO -IVf - h
testing in accordance with agreed project or
-26
industry practice
3.5 Evaluate final products against the
determined criteria
3.6 Submit to relevant personnel the
documented and summarized evaluation report
of the testing process
24 LO 4: Evaluate the testing process Plan and Discussion and
4.1 Identify testing methods that were successful prepare work video
based on industry standards TLE_IACSS9- instructions and presentation
4.2 Evaluate testing process and records system 12TECO-IVh- application
based on standard procedures j27 based on the
4.3 Document test results/findings for manufacturer
subsequent testing specification.

Prepared By:

OCTOBER C. GARAY
TEACHER II
Checked By:

VIDA MIA D. PAUSANOS

HEAD TEACHER I