Scribd
Upload
9 views

CSS12 1st - WEEK15 SSLM

Uploaded by

Clark David Alvez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

CSS12 1st - WEEK15 SSLM

Uploaded by

Clark David Alvez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

TVL – COMPUTER SYSTEMS SERVICING 12

Name: ______________________________________ Date: ____________________

Grade: ______________________________________ Section: ___________________

15 SSLM No. ____


Semester: 1st Week: ____ 15 ELC(s): Inspect and Test the Configured
Computer Networks
ELC code: TLE_IACSS912SUCN-IIf-j-36

Objectives:
Occupational Health and Safety (OHS) policies and procedures in testing
computer systems and networks
Explain computer system testing and inspections

Title of Textbook/LM to Study: ___________________________________


Chapter: ___ Pages: ___ Topic: ___________________________________

Let Us Discover

General Safety Tips and Reminders

Safety practices should be learned early and always adhered to in working with any
electrical and electronic device, including personal computers and its peripherals. This is for
protection as well as to the people working with and for the devices that are using it.

Observe good housekeeping in the area of the equipment during and after
maintenance or repair. Place removed covers and other parts in a safe place, away from all
personnel, while you are servicing the equipment.

Dress for the Job

Keep your tool case away from walk areas so that other people will not trip over it.

Do not wear loose clothing that can be trapped in the moving parts of an equipment. Ensure
that your sleeves are fastened or rolled up above your elbows. If your hair is long, tie it up or
use a hair net or hair cap.

1 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021


Electrical Safety

Electric current from power, telephone and communication cables are often hazardous. To
avoid personal injury or equipment damage, disconnect the attached power cords,
telecommunications systems, network and modems before you open the server/workstation
covers, unless instructed otherwise in the installation and configuration procedure.

Precautions!

Disconnect all power before;

Performing a mechanical inspection;

Working near power supplies;

Removing or installing main units.

Before starting work on the equipment, unplug the power cord.

Never assume that power has been disconnected from a circuit. First, check that it
has been powered off.

Always look carefully for possible hazards in your work

Moist floor

Non-grounded power extension cables

Power surges

COMPUTER SYSTEM TESTING AND INSPECTION

TEST THE HARDWARE COMPONENTS

Before testing the hardware components, make sure that the power cable is plugged in
properly. Some computer systems have several cables, so check if every plug is secure.

Below are some devices that must be inspected for possible errors or problems.

1. Computer monitor and its peripherals


a. Monitor and its interface cable
b. Video card
c. Monitor power cable
2. Keyboard and Mouse
a. Keyboard connector
b. Mouse connector
3. Input/ Output ports and devices
a. Connection cable between the I/O port and peripheral device
b. Setting in the CMOS/BIOS setup program
c. C/O port on the motherboard

2 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021


4. Power Supply
a. Power cord
b. Fuse
c. Switch (if the power supply have own power controller)
Note!: After the inspection, shut down and restart the computer system and double-check all
inspected and tested hardware components.

TEST THE SOFTWARE COMPONENTS

1. Operating System
a. Run live updates of the operating system to get the latest patches and updates
(Note: Think wisely if your OS is a crack version or NOT genuine do not RUN live
updates!)

2. Application Software
a. Check the latest updates
(Note: Make sure that application software is licensed!)

3. Antivirus Software
a. Run an antivirus program
b. Check for spyware updates

Let Us Try

Activity 1. Fill ME!


Complete the given statement. Pick the possible answer in the Magic box. Fill in the blank
with the correct answer
equipment connect good housekeeping hardware unplug
maintenance personal injury loose plug disconnect

1. Observe ___________________in the area of the equipment during and after or


_________________ repair
2. Before testing the _______________components, make sure that the power cable is
plugged in properly.
3. Before starting work on the equipment, ______________the power cord.
4. To avoid _____________or equipment damage,_____________ the attached
power cords.
5. Do not wear ______________clothing that can be trapped in the moving parts of an
_______________.

3 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021


Let Us Do
Activity 2.Tell ME!
Directions: List down the possible errors or problems and give brief discussion on conduct
testing.

List hardware components Possible errors or problems Brief discussion on conduct testing
Computer monitor and its
peripherals

Keyboard and Mouse

List software components Possible errors or problems Brief discussion on conduct testing
Operating System

Application Software

Antivirus Software

Let Us Apply

Activity 3. Test of Understanding


Directions: Now it's time to apply your knowledge in real-life situations. Briefly explain the
given situation. Write your answer on the space provided.

1. What safety practices did you apply when you inspect the physical
connections of your desktop computer?
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
___________________________________________.

2. In testing software components, operating systems are one of them. Why is it


necessary to consider the genuineness or authenticity of the operating system
before running updates?
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
___________________________________________.

4 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021


Rubrics

Rubrics Activity 3.
The performance of the learners will be rated based on the following criteria.
Criteria 3 2 1
Excellent Very Satisfactory Satisfactory
Content Substantial, specific and/or Sufficiently developed Limited content with
Knowledge illustrative content content with adequate inadequate
demonstrating strong elaboration or elaboration or
development and sophisticated explanation explanation.
ideas.
Spelling No misspelled word 1-3 misspelled words 4 or more misspelled
words
Capitalization Follows correct capitalization 1-3 capitalization errors. 4 or more
(pronouns, sentences) capitalizations errors.
Punctuation Applies punctuation correctly. 1-3 incorrect use of 4 or more incorrect
punctuations. use of punctuations.
Handwriting Legible 1-3 words can’t be 4 or more words can’t
clearly read. be clearly read.

References

Technical Vocational and Livelihood Education – Information Communication and


Technologies

MELC: TLE_IACSS912SUCN-IIf-j-36

TVL-Computer Systems Servicing 12 Self-Learning


SSLM Development TeamModule. Q2 – Module 4: Inspect
and Test the Configured Computer Networks. Abendan, W. A. et al. Pp 1
Writer: Wilma M. Abendan
Content Editor: Acel S. Monares
LR Evaluator: Donabella P. Pagalan
Illustrator: None
Creative Arts Designer: Reggie D. Galindez
Education Program Supervisor: EPP/TLE/TVL: Amalia C. Caballes
Education Program Supervisor – Learning Resources: Sally A. Palomo
Curriculum Implementation Division Chief: Juliet F. Lastimosa
Asst. Schools Division Superintendent: Carlos G. Susarno, Ph. D.
Schools Division Superintendent: Romelito G. Flores, CESO V

5 GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 14, 2021


GSC-CID-LRMS-ESSLM, v.r. 03.00, Effective June 9, 2021

You might also like