CSS-9-THIRD-PRETEST
CSS-9-THIRD-PRETEST
MULTIPLE CHOICE:
Directions: Read and analyze the questions carefully. Select the best answer that corresponds to the given
question. Write only the letter on your ½ length wise paper.
1. What part of a simple circuit controls the flow of current from the source to the consuming devices?
a. Source b. Protecting c. Controlling d. Connecting
4. In designing a circuit, what will be the last thing you need to do?
a. Prepare tools and materials c. Make a circuit plan.
b. Test the designed circuit. d. Check the required parts.
7. What will happen to the device if connectors are removed while the power is still on?
a. Nothing will happen c. Automatic shutdown
b. Malfunction of device d. None of the above
__ 8. Albert found a capacitor at home to replace the faulty one, what type of test will be used to identify
if it is busted/ broken or still working?
a. Continuity test b. Diagnostic test c. Performance test d. Voltage test
12. Which of the following electronic components is NOT used in wire termination?
a. Switch b. Connector c. Terminal d. Transistor
14. Which of the following is NOT appropriate to do when dealing with electrical components?
a. Keep any electrical components covered closed.
1
b. Make sure to turn off the power.
c. Touch the terminals while the power is on.
d. Apply the correct voltage to the terminal.
15. You are tasked to make a circuit in turning on the computer system. Which of the following
preparations should be done first?
a. Test the circuit. c. Study schematic symbols.
b. Check the voltage of electrical sources. d. Get all tools and materials needed ready.
16. Which of the following should be done first, to be able to install OS?
a. Choose Language and Other Preferences
b. Restart your computer with the Windows 7 DVD in your optical drive, or with the properly configured
USB flash drive plugged in
c. Wait for Windows 7 Installation Files to Load
d. Click the Install Now Button
18. Kevin wants to replace the existing OS in his computer, which of the following options should be
chosen?
a. Accept the Windows 7 License Terms
b. Click on the Custom (advanced) button
c. Show the Windows 7 Advanced Drive Options
d. Click on Upgrade
19. Which of the following is a suite of software that includes Word, Excel, and PowerPoint?
a. Corel b. Microsoft Office c. Adobe d. Macintosh
20. What test equipment is a combination of Voltmeter, Ammeter and Ohmmeter used to measure
different parameters of an electronic circuit like current, voltage?
a. Oscilloscope b. Multi tester c. Signal generator d. LAN tester
21. How many products key you must enter during the installation process of operating system?
a. 15-character b. 20-character c. 24-character d. 25-character
23. The ______________ assigns CPU time and memory addresses to programs running on the
computer and gives an interface between the hardware and the computer user.
a. Application Software c. Utility Programs
b. Operating System d. Device Drivers
24. From the examples given, which of the following is not a Windows XP minimum requirement?
a. 4.3 GB hard disk space or more c. 128 MB or higher
b. CD Rom or DVD ROM d. Lower resolution monitor
______ 25. Which of the following parts of the System Unit should be installed first in Assembling the System
Unit?
a. Memory b. Motherboard c. Power Supply d. Hard Drive
27. Which of the following is the diagnostic testing sequence that a computer's basic input/output
system (or "starting program") runs to determine if the computer peripherals are working properly?
a. BIOS b. Process Explorer c. Disk Defragmentation d. POST
_______ 28. This is a software which are created to facilitate a variety of functions, including managing
information, manipulating data, constructing visuals, coordinating resources, and calculating figures.
a. Application Software c. Utility Programs
2
b. Operating System d. Device Drivers
31. What type of software is first flashed on the screen after restarting your computer?
a. Anti-virus Software c. Operating System
b. Application Software d.Programming Software
33. BIOS contains several hardware configuration options. Which of the following shows the things
that you can do in BIOS systems?
a. Change the boot sector c. Change the HDD settings
b. Change the date and time d. All of the choices
______ 34. Ryan decided to reformat his computer after using it for three (3) years. What do you think that is
the reason why Ryan needs to reformat his computer?
a. Because the Anti-virus software of the computer is functioning very well.
b. Because there are two operating systems installed in the system.
c. Because some of the hardware parts of the computer are not functioning well
d. Because the size of the HDD is very large too.
37. Which of the following examples instructs the computer on how to perform a series of basic
functions such as booting and keyboard control?
a. BIOS b. Configuration c. Setup d. System
______ 38. After crimping the cable, you need to test the cable to know the correct arrangement of cables that
will be used in networking. What tool would you use?
a. LAN Tester b. Multi Tester c. UTP Tester d. Volt Ohmmeter
39. The ______________ assigns CPU time and memory addresses to programs running on the
computer and gives an interface between the hardware and the computer user.
a. Application Software c. Utility Programs
b. Operating System d. Device Drivers
40. In testing electronic components, which of the following steps come first?
a. Determine criteria for testing electronics components.
b. Plan an approach for components testing.
c. Test components
d. Evaluate the testing process.
3
41. What process is used to control the functionality of any electronic component to
ensure whether a component is defective or not?
a. testing b. planning c. preparing d. evaluating
43.Which of the following is define as the opposition to the flow of current and measured
in ohms (Ω)?
a. current b. electricity c. resistance d. Voltage
45. Can you list examples of tools and materials in making a network cable?
a. Crimping tools, multi-tester, RJ11, and UTP cable.
b. Crimping tool, LAN tester, RJ 45, and UTP cable.
c. LAN tester, RJ11, RJ34 and wire stripper.
d. LAN tester, screwdriver, wire stripper, and UTP cable.
46. When the folder copy phase is complete, your system will reboot. What are you
going to do if you see the message “press any key to boot from CD”?
a. Do not press any key c. Reboot the system
b. Press any Key d. Reject the CD
47. Which of the following components below updates the time and date of the
computer?
a. CMOS Battery b. CPU c. Power supply d. ROM
_____48. What do you call to a computer circuit board or card that is installed in a computer
for networking?
a. LAN Card b. Memory Card c. Motherboard d. USB
49. Kevin is diagnosing a computer. He noticed that there is no flow of electricity in the
entire system even if the computer was turning on. What would be the best tool he needs
to troubleshoot his computer?
a. LAN tester b. Loopback adapter c. Multi tester d. Crimping Tool
_____50. In making a network cable, how could you determine that the RJ45 is the right
position?
a. If the first pin of RJ 45 is facing on the left side
b. If the first pin of RJ45 is facing in right side
c. If the last pin of RJ45 is on the left side
d. If the opening of RJ45 is away from the user