SESSION PLAN

Sector : ELECTRONIC
Qualification Title : COMPUTER SYSTEMS SERVICING NC II
Unit of Competency : INSTALL AND CONFIGURE COMPUTER SYSTEMS
Module Title : INSTALLING AND CONFIGURING COMPUTER SYSTEMS (40 hours)
Learning Outcomes:
LO 1. Assemble computer hardware
LO 2. Prepare Installer
LO 3. Install operating system and drivers for peripherals/ devices.
LO 4. Install the computer application software
LO 5. Conduct testing and documentation
A. INTRODUCTION
This unit covers the knowledge, skills and attitudes needed to configure computer systems.
B. LEARNING ACTIVITIES
LO 1. ASSEMBLE COMPUTER HARDWARE

Learning Content Methods Presentation Practice Feedback Resources Time

Answer Self- Compare
• Lecture Read Information
check 1.1-1 Answer with
• Role play Sheet 1.1-1 on • Tools and materials
Self-check 1.1-1
• Demonstration Occupational Health and • Computer
• Peer teaching Safety Procedures
1. Occupational Peripherals 2 Hrs.
Health and Safety • Books, CBLM
Actual demonstration on
procedures • Manual on OH& S
Occupational Health and policies
Safety Procedures

Read Information Answer Self- Compare

• Lecture • Tools, materials and
Sheet 1.1-2 on check 1.1-2 Answer with
2. Tools/ Materials/ • Demonstration test Instruments
Tools/ Materials/ Testing Self-check 1.1-2
Testing Devices • Role Play • Inventory form
2 Hrs.
Devices
• Peer teaching
• Application notes
 Actual demonstration on Perform Task Performance
inventory of Sheet 1.1-2 on Criteria
Tools/ Materials/ Testing Inventory of Tools, Checklist 1.1-2
Devices Procedures Materials, Testing
Devices

• Lecture Read Information Answer Self- Compare

3. Types and • PC or workstation
Functions of a • Actual Sheet 1.1-3 on check 1.1-3 Answer with
Computer Demonstration Types and Functions of a Self-check 1.1-3 • Books, Internet 2 Hrs.
• CBLM/ Information
• Viewing Computer
Sheet
multimedia
Answer Self-
• Lecture
Read Information Compare • Tools and test
check 1.1-4
Sheet 1.1-4 on Answer with Instruments
• Viewing
Assemble Self-check 1.1-4 • Computer
Multimedia
4. 4. Assemble and Computer peripherals/devices
Disassemble of • Actual hardware • Motherboard manuals 5 Hrs.
computer Demonstration Perform Task • Hand tools
• Peer teaching Demonstration on Performance
Sheet 1.1-4 on • Anti-static wrist strap
Assemble and Criteria
Install Processor to the • Anti-static mat
Disassemble of Checklist 1.1-4
Motherboard •
Computer
• Lecture Read Information Answer Self- Compare
5. Configure Basic • Demonstration Sheet 1.1-5 on check 1.1-5 Answer with 1. PC or workstation
2 Hrs.
Input and Output • Viewing Configure Basic Input and Self-check 1.1-5 2. Motherboard
System (BIOS) Multimedia Output System manuals
• Peer teaching Performance
Demonstration on Perform Task Criteria
Configuring Basic Input Sheet 1.1-4 on Checklist 1.1-5
and Output System Set System Date and
Time
LO 2. PREPARE INSTALLER

Learning Content Methods Presentation Practice Feedback Resources Time

Read Information Answer Self- Compare
1.Lecture Sheet 1.2-1 on check 1.2.1 Answer with 1. PC or workstation
1. Create Portable 2.Demonstration Create bootable USB Self-check 1.2.1 2. Appropriate OS, 4 hrs.
Bootable Device 3.Viewing flash drive with Windows drivers and software
multimedia Server 2008 R2 applications/program
Demonstration on
Configuring Basic Input
Read Information
and Output System Answer Self- Compare 1. Tools and test
Sheet 1.2-2 on check 1.2-2 Answer with instruments
1.Lecture Bootable Media Self-check on 2. PC or workstation
2.Demonstration 1.2.2 3. Computer
2. Operating System/ 3.Viewing peripherals/devices 3 hrs.
Application/ Device multimedia Perform Task Perform Task Performance 4. Appropriate OS,
driver installer Sheet 1.2.2 on Sheet 1.2.2 on Criteria drivers and software
Creating bootable Creating Checklist 1.2.2 applications/program
device bootable device
Read Information Answer Self- Check yourself 1. Tools and test
Sheet 1.2-3 on check 1.2-3 on by answering instruments
3. Basic system boot 1.Demonstration Driver/Device Driver/Device the Self-check 2. PC or workstation
sequences and boot 2.Viewing driver driver 1.2-3. 3. Computer
methods multimedia Driver/Device peripherals/devices 2 hrs.
driver 4. Appropriate OS,
drivers and software
applications/program
LO3: INSTALL OPERATING SYSTEM AND DRIVERS FOR PERIPHERALS/DEVICES
Learning Content Methods Presentation Practice Feedback Resources Time
Read Information 1. Tools and test
1.Lecture Sheet 1.3-1 on OS instruments
2.Demonstration 2. PC or workstation
1. Install Operating 3.Viewing Perform Task Perform Task Performance 3. Computer
Systems multimedia Sheet on 1.3-1 Sheet on 1.3-1 Checklist on peripherals/devices 8 hrs.
Install Operating Install 1.3-1 Install 4. Appropriate OS,
Systems Operating Operating drivers and software
Systems Systems applications/program
 Read Information 1. Tools and test
1.Demonstration Sheet 1.3-2 on instruments
2.Viewing Install Device 2. PC or workstation
2. Install device’s multimedia driver 3. Computer
driver peripherals/devices
Perform Task Perform Task Performance 4. Appropriate OS, 3 hrs.
Sheet on 1.3-2 Sheet on 1.3-2 Checklist on drivers and software
Install Device Install Device 1.3-2 applications/program
Driver Driver 5. User’s Manual
LO 4: INSTALL APPLICATION SOFTWARE
Learning Content Methods Presentation Practice Feedback Resources Time
Read Information 1. Tools and test
1.Demonstration Sheet 1.4-1 on instruments
2.Viewing Application 2. PC or workstation
1. Install Application multimedia Software 3. Computer
Software peripherals/devices 4 hrs.
Perform Task Perform Task Performance 4. Appropriate OS,
Sheet on 1.4-1 Sheet on 1.4-1 Checklist on drivers and software
Install Install Apps. 1.4-1 applications/program
Application 5. Books, Internet
Software 6. User’s Manual
LO5. CONDUCT TESTING AND DOCUMENTATION
Learning Content Methods Presentation Practice Feedback Resources Time
Read Information Answer Self- 1. Tools and test
Sheet 1.5-1 on check 1.5-1 on instruments
1. Discussion Conduct Test & Conduct Test & 2. PC or workstation
2.Demonstration Documentation Documentation 3. Computer
1. Conduct Test and 3. Portfolio peripherals/devices 4 hrs.
Documentation Perform Task Perform Task Performance 4. Appropriate OS,
Sheet on 1.5-1 Sheet on 1.5-1 Checklist on drivers and software
Conduct Test & Conduct Test & 1.5-1 applications/program
Documentation Documentation Books, Internet
C. ASSESSMENT PLAN

o Practical Demonstration w/ oral questioning

o Interview
o Portfolio
D. TEACHER’S SELF-REFLECTION OF THE SESSION

This Session Plan’s has been documented and found successful according to the learning process taken and learned by the train ees. The use of
CBLM based on this Plan resulted in sufficient learning and passing the qualification. Update the plan and integrated new information learning
regarding this qualification.

Prepared by:

ERIC M. TALAMISAN
CSS NC II Trainer/Assessor
 SESSION PLAN

Sector : ELECTRONIC
Qualification Title : COMPUTER SYSTEMS SERVICING NC II
Unit of Competency : SET-UP COMPUTER NETWORKS
Module Title : SETTING-UP COMPUTER NETWORKS (40 hours)
Learning Outcomes:
LO 1. Install network cables
LO 2. Set Network configuration
LO 3. Set router/wi-fi/wireless access point/ repeater
LO 4. Inspect and test the configured computer networks
A. INTRODUCTION
This unit covers the outcomes required in setting-up computers networks for LANs and small-office home-office (SOHO) systems. It
consists of competencies to install network cables, set network configuration, set router/Wi-Fi/ wireless access point/repeater configuration as
well as to inspect and test the configured computer networks.
B. LEARNING ACTIVITIES
LO 1. Install Network Cables

Learning Content Methods Presentation Practice Feedback Resources Time

Answer Self- Compare Answer • PC or workstation
Read Information check 2.1-1 with Self-check • CBLM/Information
Sheet 2.1-1 on 2.1-1 sheet
1. Lecture
Network design • Internet
1.Network design and 2. Discussion
and topologies • Audio visual
2 Hrs
topologies 3. Viewing
Perform Task Evaluate with
multimedia
Sheet 2.1-1 Performance
Draw a LAN Criteria Checklist
Design 2.1-2

1. Lecture Read Information Answer Self- Compare Answer • PC or workstation 2 Hrs

2.Cabling system 2. Discussion Sheet 1.1-2 on check 2.1-2 with Self-check • Network cables and
design and 3. Actual Cabling system 2.1-2 materials
installation Demonstration design and • Tools and test
 4. Viewing installation instruments
multimedia • PPE
• Slotted PVC
• Rack mount
• Patch panel
1. Lecture Read Information Answer Self- Compare Answer • PPE 1 Hr
2. Discussion Sheet 2.1-3 on check 2.1-3 with Self-check • Network cables
3.Types of network
3. Demonstration Types of network 2.1-3 • CBLM/ Information
4. Viewing cables and sheet
cables and
connectors
multimedia connectors • Cable connectors
• Audio visual

1. Lecture Read Information Answer Self- Compare Answer •Hand tools

2. Discussion Sheet 2.1-4 on check 2.1-4 with Self-check •Network devices
4.Tools equipment
3. Actual Patch Panel 2.1-4 •Test instruments
and network 2 Hrs
Demonstration •Manuals
devices
4. Viewing •Audio visual
multimedia
1.Lecture Read Information Answer Self- Compare Answer • PPE
2. Discussion Sheet 2.1-5 on check 2.1-5 with Self-check • CBLM/Information
3.Demonstration PPE, OH & S 2.1-5 sheet
5. PPE, OH & S 4.Viewing policies, 5’s and 3 • OH & S manuals 2 Hrs
policies, 5’s and 3 multimedia R’s principles • 5’s and 3 R’s flyers
R’s principles. leaflets
• internet

1. Lecture Read Information • PPE 4 Hrs

2. Discussion Sheet 2.1-6 on • UTP cable cat 5e
3. Actual UTP cable • RJ 45 modular jack
6.UTP cable
Demonstration termination, • Crimping tool
4. Viewing installing network • Wire stripper
termination,
multimedia cable and patch • Lan tester
installing network
cord Perform Task Evaluate with • Side cutter
cable and patch
Sheet 2.1-6: Performance
cord • Patch panel
Terminate a UTP Criteria Checklist
• Rack mount
Cat 5e TIA 568 B 2.1-6
ethernet cable • Slotted PVC
• CBLM/information
 sheet
• Audio visual
LO 2. Set Network configuration

Learning Content Methods Presentation Practice Feedback Resources Time

1. Lecture Read Information Answer Self- Compared answer •PC or workstation
2. Discussion Sheet 2.2-1 on Ad check 2.2-1 with Self-check •Laptop
3. Actual Hoc and 2.2-1 •Wireless network
1. Ad Hoc and Demonstration Infrastructure adapter
Infrastructure 4.Viewing wireless networks •PPE
wireless networks multimedia •CBLM/ Information 2 Hrs
sheet
Perform Task Evaluate •Audio visual
Sheet 2.2-1 performances to
Setup an Ad Hoc Performance
Network Criteria 2.2-1
1. Lecture Read Information Answer Self- Compare Answer •PC running Windows
2. Discussion Sheet 2.2-2 on check 2.2-2 with Self-check on server 2008 R2
3. Actual Peer-Peer and 2.2.2 •PC running Windows 7
Demonstration Server Base •Cross over UTP cable
2. Peer-Peer and 4. Viewing network cat 5 e
Server Base network multimedia •PPE 3 Hrs
Perform Task Evaluate •CBLM/ Information
Sheet 2.2-2: performances to sheet
Setup a Peer- Performance •Manuals
Peer Network Criteria 2.2-2 •
1. Lecture Read Information Answer Self- Check yourself • PC or workstation
2. Discussion Sheet 2.2-3 on check 2.2-3 by answering the • NIC/LAN card
3. Actual Install and Self-check 2.2-3 • LAN card device
3. Install and Demonstration configure Network driver
configure Network 4.Viewing Interface Card • Philip screw driver 2 Hrs
Interface Card multimedia • Anti-static wrist
strap
Perform Task Evaluate • CBLM/information
Sheet 2.2-3 performances to sheet
Install NIC or Performance • Audio visual
LAN Driver Criteria 2.2-3
1. Lecture Read Information Answer Self- Check yourself • PC or workstation
4. Common network 2. Discussion Sheet 2.2-4 on check 2.2-4 by answering the • Network cables and
problems and 3. Demonstration Common network Self-check 2.2-4 materials
troubleshooting tools. 4. Viewing problems and • PPE
multimedia troubleshooting • Test instruments
tools • Network 2 Hrs
troubleshooting utility
• CBLM/ Information
sheet
• Audio visual
5. Responding to 1.Lecture Read Information Answer Self- Check yourself • PC or workstation
unplanned events 2. Discussion Sheet 2.2-5 on IP check 2.2-5 by answering the • PPE
3.Demonstration Addressing Self-check 2.2-5 • CBLM/Information
4.Viewing sheet
multimedia • Audio visual 1 Hr
• Report documents
Perform Task Evaluate •
Sheet 2.2-5 on performances to
Provide report of Performance
Simulation on Criteria 2.2-5
Responding to
unplanned
events

LO3: Set router/wi-fi/wireless access point/ repeater

Learning Content Methods Presentation Practice Feedback Resources Time
1. Lecture Read Information Answer Self- Check yourself •PC or workstation
2. Discussion Sheet 2.3-1 on check 2.3-1 by answering the •pre terminated UTP cat
3. Actual Setting up a Self-check 2.3-1 5e cable
1. Setting up a Demonstration multifunction • PPE 3 Hrs
multifunction router 4.Viewing router • Network router
multimedia • CBLM/ Information
sheet
• Device Manual
1. Lecture Read Information Answer Self- Check yourself •PC or workstation
2. Discussion Sheet 2.3-2: Setting check 2.3-2 by answering the •pre terminated straight
3. Actual up wireless Self-check 2.3-2 through UTP cat 5e
2. Setting up wireless Demonstration Access Point/ cable
Access Point/ 4.Viewing Repeater • PPE
Repeater multimedia • Network router 3 Hrs
Perform Task Evaluate • Repeater/Range
Sheet on 2.3-2 performances to extender
Configure Performance • CBLM/ Information
wireless access Criteria 2.3-2 sheet
point • Device Manual
3. Configure LAN 1. Lecture Read Information Answer Self- Check yourself •PC or workstation 3 Hrs
/WAN port 2. Discussion Sheet 2.3-3: check 2.3-3 by answering the •pre terminated straight
3. Actual Configure LAN Self-check 2.3-3 through UTP cat 5e
Demonstration /WAN port cable
4.Viewing • PPE
multimedia • Network router
Perform Task Evaluate • Repeater/Range
Sheet on 2.3-3 performances to extender
Assigning IP Performance • CBLM/ Information
address to a Criteria 2.3-3 sheet
Computer LAN Device Manual
port
4. Configure 1. Lecture Read Information Answer Self- Check yourself •PC or workstation 3 Hrs
Windows firewall/ 2. Discussion Sheet 2.3-4: check 2.3-4 by answering the •Network cables and
with advance security 3. Actual Configure Self-check 2.3-4 materials
Demonstration Windows firewall/ Perform Task Evaluate •Tools and test
4.Viewing with advance Sheet on 2.3-4 performances to instruments
multimedia security Add inbound Performance •Appropriate software
rule to windows Criteria 2.3-4 application /
firewall advance programs
settings •PPE
•CBLM/ Information
sheet
LO 4: Inspect and test the configured computer networks
Learning Content Methods Presentation Practice Feedback Resources Time
1. Lecture Read Information Answer Self- Check yourself • Tools and test
2. Discussion Sheet 2.4-1 on 1. check 2.4-1 by answering the instruments
3. Actual Cable connectivity Self-check 2.4-1 • PC or workstation
Demonstration testing and • Computer
1. Cable connectivity 4. Viewing troubleshooting peripherals/device 4 Hrs
 testing and multimedia • CBLM/ Information
troubleshooting sheet,
• Network
troubleshooting tools
and utilities
• Internet
• PPE
2. Network 1. Lecture Read Information Answer Self- Check yourself • Tools and test 3 Hrs
testing and 2. Discussion Sheet 2.4-2: Cable check 2.4-2 by answering the instruments
documentation 3. Actual connectivity Self-check 2.4-2 • PC or workstation
Demonstration testing and • Computer
4. Viewing troubleshooting Perform Task Evaluate peripherals/device
multimedia Sheet on 2.4-2 performances to • CBLM/ Information
Perform network Performance sheet,
printing test Criteria 2.4-2 • Network
troubleshooting tools
and utilities
• Internet
• PPE

C. ASSESSMENT PLAN
• Written Test
• Practical Test
• Demonstration
• Portfolio

D. TEACHER’S SELF-REFLECTION OF THE SESSION

This unit covers the outcomes required in setting-up computers networks for LANs and small-office home-office (SOHO) systems. It
consists of competencies to install network cables, set network configuration, set router/Wi-Fi/ wireless access point/repeater
configuration as well as to inspect and test the configured computer networks.

Prepared by:

ERIC M. TALAMISAN
CSS NC II Trainer/Assessor
 TO VIEW MORE:
Complete Session Plan for Basic, Common and
Core Competencies
Please contact:

https://www.facebook.com/eric.talamisan

Mobile:
09672189086
 SESSION PLAN

Sector : ELECTRONIC
Qualification Title : COMPUTER SYSTEMS SERVICING NC II
Unit of Competency : MAINTAIN AND REPAIR COMPUTER SYSTEM AND NETWORKS
Module Title : MAINTAINING AND REPAIR COMPUTER SYSTEM AND NETWORKS (40 HOURS)
Learning Outcomes:
LO 1. Plan and prepare for the maintenance and repair
LO 2. Maintain computer systems and networks
LO 3. Diagnose faults of computer systems and networks
LO 4. Rectify/correct defects in computer systems and networks
LO 5. Inspect and test configured/repaired computer system and networks
B.INTRODUCTION
This unit covers the outcomes required in maintaining and troubleshooting computer systems and networks. It consists of competencies maintenance
and repair, troubleshooting and error isolation, diagnosing faults, and 5’s and 3 R’s implementation procedures.

B. LEARNING ACTIVITIES

LO 1. Plan and prepare for the maintenance and repair

Learning Content Methods Presentation Practice Feedback Resources Time

1. Lecture Read Information Answer Self-check Compare Answer • PC or workstation
2. Discussion Sheet 4.1-1: Plan and 4.1-1 with Self-check 4.1- • CBLM/Information sheet
3. Actual prepare for 1 • Manuals
Demonstration maintenance and
• Maintenance checklist
7. Plan and prepare 3. Viewing repair
• Internet
for maintenance multimedia
and repair • Audio visual 2 Hrs

Perform Task Evaluate with

Sheet 4.1-1 Performance Criteria
Create a Checklist 4.1-1
maintenance plan
of your computer
 1. Lecture Read Information Answer Self-check Compare Answer • PC or workstation 1 Hr
2. Discussion Sheet 4.1-2: 4.1-2 with Self-check 4.1- • Network cables and
3. Actual Checklist of 2 materials
Demonstration equipment and • Tools and test
8. Checklist of equipment 4. Viewing testing devices instruments
and testing devices multimedia • PPE
• Rack mount
• Patch panel
• Equipment checklist
1. Lecture Read Information Answer Self-check Compare Answer • PPE 1 Hr
2. Discussion Sheet 4.1-3: 3. OH & 4.1-3 with Self-check 4.1- • Network cables
3. Actual S policies and 3 • CBLM/ Information sheet
Demonstration procedures • Manuals
9. OH & S policies and 4. Viewing
• Checklist
procedures multimedia • Audio visual
Perform Task Evaluate with • Internet
Sheet 4.1-3 Performance Criteria
Assessing Checklist 4.1-3
hazards or risk in
the workplace
1. Lecture Read Information Answer Self-check Compare Answer • PPE 4 Hrs
2. Discussion Sheet 4.1-4: Inspect 4.1-4 with Self-check 4.1- • Network cables
10. Inspect computer
3. Actual computer systems 4 • CBLM/ Information sheet
systems and
Demonstration and network for • Manuals
4. Viewing maintenance • Maintenance Checklist
network for
multimedia • Tools and test
maintenance
instruments
• Audio visual
• Internet
LO 2. Maintain computer systems and networks

Learning Content Methods Presentation Practice Feedback Resources Time

1. Lecture Read Information Answer Self-check Compared answer •PC or workstation
2. Discussion Sheet 4.2-1 on 4.2-1 with Self-check 4.2- •PPE
3. Actual Personal Protective 1 •CBLM/ Information sheet
1. Personal Protective Demonstration Equipment •Manuals
Equipment 4.Viewing multimedia •Checklist
•Audio visual 1 Hr
 1. Lecture Read Information Answer Self-check Compare Answer •PC or Workstation
2. Discussion Sheet 4.2-2: 4.2-2 with Self-check on •PPE
3. Actual Procedures in 4.2.2 •CBLM/ Information sheet
Demonstration maintaining •Manuals
2. Procedures in 4. Viewing computer systems •Maintenance checklist
maintaining computer multimedia Perform Task Evaluate •Audio visual 3 Hrs
systems. Sheet 4.2-2: performances to
Create a Performance Criteria
systematic 4.2-2
maintenance plan
of a computer
system
1. Lecture Read Information Answer Self-check Check yourself by • PC or workstation
2. Discussion Sheet 4.2-3: 4.2-3 answering the Self- • NIC/LAN card
3. Actual Procedures in check 4.2-3 • LAN card device
3. Procedures in Demonstration maintaining network driver
maintaining network 4.Viewing multimedia systems • Philip screw driver 3 Hrs
systems • Anti-static wrist strap
• UTP cable cat 5e
Perform Task Evaluate • Lan tester
Sheet 4.2-3 performances to
• CBLM/information
Perform LAN Performance Criteria
sheet
network 4.2-3
• Maintenance
maintenance
checklist
procedure
• Audio visual
1. Lecture Read Information Answer Self-check Check yourself by • PC or workstation
4. Problem solving in 2. Discussion Sheet 4.2-4 on 4.2-4 answering the Self- • Network cables and
emergency situation. 3. Actual Problem solving in check 4.2-4 materials
Demonstration emergency situation. • PPE
4. Viewing • Tools, materials and
multimedia test instruments 1 Hr
• Peripherals and
Perform Task Evaluate devices
Sheet 4.2-4 performances to • Manuals
Create a report Performance Criteria • OH & S policies
Create a report 4.2-4
• CBLM/ Information
document of
sheet
simulation on
• Audio visual
responding to
unplanned events
LO3: Diagnose Faults of Computer Systems and Networks
 Learning Content Methods Presentation Practice Feedback Resources Time
1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
2. Discussion Sheet 4.3-1 on 4.3-1 answering the Self- • PPE
3. Actual Performed testing check 4.3-1 • CBLM/ Information
1. Common Demonstration and pre-deployment sheet 2 Hrs
error codes and 4.Viewing multimedia procedures Perform Task Evaluate • Device Manual
start up messages Sheet 4.3-1: performances to • Internet
List down other Performance Criteria • Audio visual
error codes and 4.3-1
error messages
with description
1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
2. Discussion Sheet 4.3-2: 4.3-2 answering the Self- •UTP cat 5e cable
3. Actual Diagnose and check 4.3-2 • PPE
2. Diagnose and Demonstration identify faulty • Network router
identify faulty system 4.Viewing multimedia system and Cable • Tools and network
and Cable tester, 4 Hrs
Perform Task Evaluate • CBLM/ Information
Sheet 4.3-2: performances to sheet
Perform a Performance Criteria • Device Manual
simulation on 4.3-2 • NIC/LAN card
diagnosing
computer system
3. Problem solving in 1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
emergency situation 2. Discussion Sheet 4.3-3: Problem 4.3-3 answering the Self- • PPE
3. Actual solving in check 4.3-3 • CBLM/ Information
Demonstration emergency situation sheet
4.Viewing multimedia • Manuals
Perform Task Evaluate • Internet
Sheet 4.3-3: performances to • Audio visual 2 Hrs
Search another Performance Criteria
emergency 4.3-3
situation that may
happen during
computer
operation
LO4: Rectify/Correct Defects in Computer Systems and Networks
Learning Content Methods Presentation Practice Feedback Resources Time
1. Basic 1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
procedures for 2. Discussion Sheet 4.4-1: Basic 4.4-1 answering the Self- • PPE 3 Hrs
adding and 3. Actual procedures for check 4.4-1 • Hand tools
 removing Demonstration adding and • Peripherals, materials
components 4.Viewing multimedia removing Perform Task Evaluate • CBLM/ Information
components Sheet 4.4-1: performances to sheet
Create a video of Performance Criteria • Manuals
yourself while 4.4-1 • OH & S policies
performing adding • Internet
and removing of • Audio visual
components
1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
2. Discussion Sheet 4.4-2: Run 4.4-2 answering the Self- • PPE
3. Actual Diagnostic Software check 4.4-2 • CBLM/ Information
Demonstration sheet
4.Viewing multimedia Perform Task Evaluate • Diagnostic tools
2. Run diagnostic Sheet 4.4-2: performances to • Test instruments
3 Hrs
software Create a Performance Criteria • Manuals
presentation 4.4-2 • Internet
about performing • Audio visual
disk
defragmenting of
a hard drive
LO5: Inspect and test configured/repaired computer system and networks
Learning Content Methods Presentation Practice Feedback Resources Time
1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
2. Discussion Sheet 4.5-1: Inspect 4.5-1 answering the Self- • PPE
3. Actual and Test the check 4.5-1 • CBLM/ Information
Demonstration computer systems sheet
1. Inspect and 4.Viewing multimedia and networks Perform Task Evaluate • Software diagnostic
Test the computer Sheet 5.4-1: performances to tools
4 Hrs
systems and Identifying Performance Criteria • Network diagnostic
networks. common 4.5-1 tools
symptoms and its • Test instruments
possible cause • Manuals
• Internet
• Audio visual
1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
2. Discussion Sheet 4.5-2: 4.5-2 answering the Self- • PPE
2. Troubleshoot 3. Actual Troubleshooting and check 4.5-2 • CBLM/ Information
ing and isolating Demonstration isolating computer sheet 4 Hrs
computer problems. 4.Viewing multimedia problems Perform Task Evaluate • Software diagnostic
Sheet 4.5-2: performances to tools
Perform Performance Criteria • Network diagnostic
 Troubleshooting 4.5-2 tools
computer • Test instruments
problems • Manuals
• Internet
•Audio visual
•Checklist
1. Lecture Read Information Answer Self-check Check yourself by •PC or workstation
2. Discussion Sheet 4.5-3: 5 s, 3 r’ s 4.5-3 answering the Self- • PPE
3. Actual principles and WEEE check 4.5-3 • CBLM/ Information
Demonstration directives sheet
4.Viewing multimedia Perform Task Evaluate • Tools, materials and
3. 5 s, 3 r’s
Sheet 4.5-3: performances to test instruments
principles and 2 Hrs
Perform 5 s Performance Criteria • Computer Peripherals
WEEE directives.
implementation 4.5-3 • Network devices
on your work area • 5 s and 3 R’s
Manuals principles
• Internet
•Audio visual

C. ASSESSMENT PLAN
• Written Test
• Practical Test
• Demonstration
• Portfolio

D. TEACHER’S SELF-REFLECTION OF THE SESSION

This unit covers the outcomes required in maintaining and troubleshooting computer systems and networks for LANs and small-office home-office
(SOHO) systems. It consists of competencies to maintain, troubleshoot and isolating errors, set maintenance plan, determining common faults and
errors, run diagnostic software for maintenance, as well as to inspect and test the configured computer systems and networks.

Prepared by:

ERIC M. TALAMISAN
CSS NC II Trainer/Assessor