Republic of the Philippines

Department of Education
REGION XII-SOCCSKSARGEN
SCHOOLS DIVISION OF GENERAL SANTOS CITY
GENERAL SANTOS CITY NATIONAL SECONDARY SCHOOL OF ARTS AND TRADES

THIRD QUARTER EXAMINATION

GRADE 9 Computer System Servicing
SY: 2023-2024

NAME: ___________________________________________ GRADE & SECTION: _____________

SUBJECT TEACHER: _______________________________ SCORE :_______________________
I.GENERAL DIRECTION: Read each item carefully and answer the questions. Use black or blue pen only. Avoid too
much erasure.
1. What is the first command you enter in Diskpart to start preparing a bootable USB?
a) format b) list disk c) select partition d) clean

2. What does the active command do in the Diskpart utility?

a) Creates a new partition b) Formats the USB
c) Makes the partition bootable d) Assigns a letter to the USB

3. Which of the following are necessary steps for creating a bootable USB with Rufus? (Select all that apply)
a) Insert USB drive b) Download the operating system ISO
c) Format the USB to FAT32 d) Use Diskpart to clean the drive

4. Why should you use FAT32 over NTFS when preparing a bootable USB for UEFI?
a) FAT32 is universally compatible with all operating systems b) FAT32 supports larger file sizes
c) FAT32 is required by UEFI firmware for booting d) NTFS is better for smaller drives

5. If a user encounters a "Boot Manager Missing" error after creating a bootable USB using Diskpart, which
step in the process should be reviewed to solve the issue?
a) The file system used for formatting the USB b) The partition type used (Primary vs. Extended)
c) The active partition was not set d) The bootable OS files were not copied correctly

6. Which of the following tools is most appropriate for creating a bootable USB from multiple ISOs?
a) Rufus b) Diskpart c) Ventoy d) Windows Media Creation Tool

7. Which command would you use in Diskpart to remove partitions from a USB?
a) clean b) format c) create partition d) delete partition

8. Which of the following actions are required to successfully create a bootable USB with Ventoy? (Select all
that apply)
a) Install Ventoy on the USB b) Format the USB with NTFS c) Copy ISO files to the USB
d) Use Disk part to prepare the USB drive

9. How do you know when your USB drive is properly configured for use with Rufus?
a) The file system is set to FAT32 b) The USB drive is formatted
c) The status message in Rufus says "Ready" d) The USB is empty after the process

10. If a user wants to create a bootable USB drive that can install multiple operating systems, which method
would be most efficient?
a) Using Diskpart and copying each OS separately b) Creating separate USB drives for each OS
c) Using Ventoy to add multiple ISOs to a single USB d) Using Rufus with the multiboot feature

11. What is the minimum processor speed required for installing Windows 10?
a) 1.5 GHz b) 2 GHz c) 1 GHz d) 2.5 GHz

12. Which of the following is necessary to start the installation of Windows 10 using a bootable USB?
a) letting the boot device to USB b) making a backup of data c) installing additional software
d) choosing the system language
13. Which of the following steps must be performed before the installation of Windows 7/10? (Select all that
apply)
a) Checking system compatibility b) Choosing the installation drive c) Formatting the hard drive
d) Selecting the license term
14. Why must you set the boot sequence in BIOS before installing Windows 7/10?
a) To ensure that the computer loads the operating system from the USB or DVD
b) To check system compatibility with Windows 7
c) To prevent virus attacks
d) To save power

15. If you installed Windows 7/10 on a system with only 1 GB RAM (32-bit version), what kind of performance
might you expect compared to a system with 2 GB RAM (64-bit version)?
a) The 1 GB system will be much faster b) The 1 GB system might struggle with multitasking and
demanding applications
c) The 2 GB system will use more power d) There will be no difference in performance

16. Which of the following is the correct storage space requirement for installing Windows 7 (64-bit version)?
a) 10 GB b) 16 GB c) 20 GB d) 32 GB

17.What does the "Custom (Advanced)" option in the Windows 7 installation process allow you to do?
a) Install drivers automatically b) Perform a fresh installation with custom partitioning
c) Install Windows updates d) Set up a network connection

18. When partitioning a hard drive for Windows 7 installation, which two partitions should be created?
a) Drive C for OS, Drive D for data b) Drive A for OS, Drive B for recovery
c) Drive C for OS, Drive F for system tools d) Only one partition for the OS

19. How does setting a password and providing a password hint improve system security after Windows 7/10
installation?
a) It prevents unauthorized access to the computer by requiring a password b) It speeds up the installation process
c) It disables all network connections d) It reduces the time needed for installation

20. What would you do if, after completing the installation of Windows 7, the computer fails to boot and
displays an error like "Boot Manager Missing"?
a) Check if the BIOS is set correctly to boot from the correct drive b) Reinstall the operating system without partitioning
c) Replace the hard drive d) Disable the password setup

21. What is the primary purpose of a device driver in a computer system?

a) To provide security for the system b) To enable communication between hardware and software
c) To increase the storage capacity of the system d) To manage the operating system’s updates

22. Which of the following is NOT a source for obtaining device drivers?
a) The original computer manufacturer b) The device manufacturer
c) The operating system's built-in drivers d) The chipset manufacturer

23. When should you use the “Add New Hardware” wizard in Control Panel?
a) When the device is recognized in Device Manager b) When the device is not displayed in Device Manager
c) When installing a software update d) When creating a new user account

24. In the process of installing drivers, which of the following steps is the first action?
a) Download the driver file b) Determine the hardware manufacture c) Install the driver d) Restart the computer

25. Which of the following methods would you use to install a device driver that includes an executable setup
file?
a) Extract the driver files manually b) Run the executable file to extract and install the driver
c) Install the driver via the Device Manager directly d) Use the Add New Hardware wizard

26. Why is it important to always try to get the latest driver from the manufacturer?
a) To avoid using generic drivers b) To ensure compatibility with the latest operating systems
c) To improve the performance and functionality of the device d) All of the above

27.Which tab in the device properties window should you click to update a device driver in Device Manager?
a) General b) Driver c) Details d) Resources

28. What should you do if a device is listed as "Unknown device" in Device Manager?
a) Reboot the system and check again b) Contact the device manufacturer for the driver
c) Use the Add New Hardware wizard to install the driver d) All of the above

29. What file type should you look for when manually installing a driver from a downloaded package?
a) .exe b) .zip c) .inf d) .sys
30. What is the first step in determining the driver needed for a specific device?
a) Visit the manufacturer’s website b) Check if the device is working correctly
c) Open Device Manager and check the device’s properties d) Extract the driver files

31. What is the primary difference between a LAN and a WAN?

a) A LAN is a network that covers a small area, while a WAN spans a broad area.
b) A LAN connects more devices than a WAN.
c) A WAN is more secure than a LAN.
d) A LAN uses wireless connections, while a WAN uses wired connections.

32. Which of the following best describes a VPN?

a) A network that connects multiple local networks over a long distance
b) A private network constructed within a public network infrastructure for secure communication
c) A network that only connects devices within a single building
d) A type of server used for centralized file storage

33. Which of the following networks is typically used by an individual to connect their smartphone, tablet, or
laptop within a short range?
a) LAN b) WAN c) PAN d) MAN

34. What is the main purpose of a Storage Area Network (SAN)?

a) To provide access to servers across a WAN
b) To consolidate storage devices so that they appear as locally attached to an operating system
c) To manage personal data and files for network users
d) To establish a VPN tunnel for secure remote access

35. Which of the following is NOT a characteristic of a Peer-to-Peer (P2P) network?

a) All computers in the network are equal
b) Each computer can act as both a client and a server
c) There is no central server managing the network
d) P2P networks are more efficient than client/server networks

36 . Which configuration of Ethernet cable would be used for direct device-to-device communication, such as a
computer connecting to another computer without a switch or hub?
a) Straight Through (T568A) b) Straight Through (T568B) c) Crossover Cable d) Both a and b

37. If two devices on a network are connected using an Ethernet cable, and one device has its pins configured
using T568A and the other uses T568B, what will likely happen?
a) The devices will communicate correctly. b) The devices will not communicate.
c) The network will become slower. d) The cable will be damaged.

38.In a client/server network model, which of the following tasks is typically handled by the server?
a) Sharing files among peers b) Centralized file storage and database management
c) Accessing resources on other computers d) Acting as both client and server

39. Which of the following is the most suitable type of network for large companies with multiple offices
across the country?
a) LAN b) PAN c) WAN d) MAN

40. What is the primary function of a bridge in a network?

a) To send data to all devices in the network
b) To connect two different LANs or segments of the same LAN using the same protocol
c) To filter and route packets between different networks
d) To amplify network signals

II. Draw a network diagram based on the following network setup. Make sure to label each device with its correct
name, show how the devices are connected to one another. The devices involved are listed below. (Item 41-65)

1. Draw all devices in the correct places.

2. Label the devices with their names and appropriate IP configurations.
3. Use T568B wiring configuration for Ethernet cables.
4. Include necessary network components like switches, routers, patch panels, and modular boxes.
5. Include the wireless access point and router in the network setup.
Prepared By:

EDGAR N. SIGLOS Checked By:

Subject Teacher
IAN KRIS J. LASTIMOSA
ICT Coordinator

Noted By:

ANGELA O. YUMANG, Ph.D Approved By:

Assistant Principal for Academic
BIENVENIDO L. RUEDAS JR.
Principal II
 Table of Specification

Cognitive
Bloom’s Item(s) HOTS-SOLO
Process PATS Description
Taxonomy Level Number Level
(Action)
1, 2, 3, 4, 5,
Recall facts Basic recall of facts (e.g.,
11, 12, 14, SOLO: Recall of
Remembering and basic command in Disk part,
16, 17, 19, Unistructural knowledge
concepts purpose of active command)
21, 22
Understanding concepts
6, 8, 9, 13,
Explain ideas SOLO: related to creating a bootable
Understanding 15, 20, 24, Explanation
or concepts Multistructural USB, troubleshooting errors,
26
and the installation process
Application of specific
Use 7, 10, 18, 23,
SOLO: Application commands, using tools, or
Applying information in 25, 29, 33,
Relational of knowledge methods to create or manage
new situations 36
the network
Understanding differences
Break down
21, 31, 34, SOLO: Extended Critical between different network
Analyzing information
37, 39, 40 Abstract thinking configurations, devices, and
into parts
troubleshooting methods
Justify a Evaluating various network
decision or 6, 30, 38, 41, SOLO: Extended setups, commands, or devices
Evaluating Evaluation
course of 42 Abstract based on requirements or
action troubleshooting outcomes
Creation of a complete
network setup with accurate
Build a new II (Network
SOLO: Extended IP addresses, device
Creating structure or Diagram Synthesis
Abstract configurations, and proper
design Task)
connections based on specific
guidelines