CSS NCII Oral Questioning Reviewer
CSS NCII Oral Questioning Reviewer
1. You want to set up a dual-boot scenario between Windows 7 and Windows Server 2008. How
would you do this?
Answer:
2. What do you call the computer software which you configure before installing the OS?
Answer:
BIOS
3. What would you advise to a client who wants to improve the computers built-in video card?
Answer: Buy an internal video card having higher memory capacity
4. What type of screw driver will you use for small screws usually found in Compaq and Apple
computers?
Answer: Torx Screwdriver
5. How will you check and what instrument will you use to determine whether the power supply is
providing enough voltage output or not?
Answer: Voltmeter. Measure the output voltage of the power supply using appropriate setting
on the voltmeter.
6. What will you do if a customer wants to Install an operating system in his PC but does not have
an optical drive?
Answer: Create a bootable flash disk/flash drive
7. What may be the problem if a computer does not recognize a bootable flash drive? What would
you do to resolve this?
Answer: Maybe the BIOS is not properly configured to boot on the flash drive. Configure the
BIOS to boot on the flash drive
8. What will you do if after installing both the IDE hard drive and optical drive you have noticed that
only one drive is working?
Answer: Check the Jumper Setting
9. If after assembling a brand new computer the monitor does not display any image or character,
what may be the possible causes?
Answer: Check power on switch, check monitor cable
10. What you should do after installing peripheral devices such as sound card?
Answer: Install driver
11. What should you configure in the BIOS when you are going to install an operating system using
optical media?
Answer: Boot Sequence
12. What should you do if suddenly there is a lightning storm that occurs while assembling a
computer?
Answer: Power off the computer and unplug it from the outlet.
13. What should you do if accidentally, water spilled on the computer which you are currently
using?
Answer: Power off the unit immediately, wipe with dry cloth the external parts and blow dry
to ensure that internal portions are completely dry before turning the power on.
SET UP COMPUTER NETWORKS
1. What do you call a bootable disk that contains a full usable OS?
Answer: Live CD/DVD
2. What term is used to define one or more IP subnets that are connected by the fast links?
Answer: Site
3. What kind of cable are you going to use if you want to network two computer units only?
Answer: Crossover cable
4. Based on rules, what type of network would you suggest to your client who wants to network
more than 300 computers?
Answer: Client/Server type of network
5. What type of network would you recommend if your client has only few computer units?
Answer: Peer to peer network
6. What would you if the devices that you are going to network are far from each other?
Answer: Use an extender or repeater
7. What would you do if you suspect that the cause of the trouble in the network is the cable?
Answer: Get a LAN tester and check the cable Swap a good or working cable in place with
the suspected cable
8. After replacing a good cable, still the computers cannot connect to each other, what are the
possible causes if the network is using static IP addresses?
Answer: Wrong IP address maybe some computer dont belong to the workgroup wrong
subnet mask
9. After configuring the network interface card, how will you going to test the connectivity of your
network?
Answer: Ping each other Using net view
10. What type of cable will you use to connect two computers?
Answer: Crossover cable
11. In order for computers to network, what are the things you are going to set or configure?
Answer: Workgroup name should be the same, IP addresses should have the same network
address and host address should be different; for subnet mask, computers in the same
network or subnet should be the same.
Answer: Maybe the computer does not belong to the network. Check the network address
portion and the workgroup
12. Aside from installing anti-virus software, how can you protect our server from viruses?
Answer: Install firewall, install updates
13. If one of the users forgot his/her password, how are you going to change the password?
Enumerate the steps in resetting a password using GUI.
Answer: Reset the password, Login as administrator. Click Start, right click My Computer, and
then click Manage. Click Local Users and groups, double click Users folder, select and right
click the username, select Set password.
14. What are you going to do to access a server located far from the client computer which you are
troubleshooting?
Remotely access the server using Remote Desktop Connection
15. What may be the reason why you cannot access and connect to other computers remotely?
How would you resolve the problem?
Answer: Maybe the computer has no password. Assign a password to that computer to that
computer
16. After installing an anti-virus to your network, you cannot connect to other computers, what
could be the possible cause of it?
Answer: Possibly, the anti-virus is blocking the network access. You have to configure the
anti-virus so as to not to block network access.
17. After logging, you noticed that you cannot change the IP address of other users, what could be
the possible cause?
Answer: The password or account is not an administrator account.
18. What policies are you going to suggest to secure your server?
Answer: Use anti-virus software, Prohibit
Administrator, Restrict administrative access
downloading
unless
authorized
by
the
19. What would you suggest in order to come up with a strong admin password?
Answer: Use password that has combination
20. As an Administrator and security precaution, what type of account will you see in performing
ordinary tasks?
Answer: Power user account. Limit the use of administrator account